Re: [PATCH v2 1/4] iio: gyro: add support for fxas21002c

From: Afonso Bordado
Date: Tue Sep 04 2018 - 14:23:55 EST

Next message: Afonso Bordado: "Re: [PATCH v2 1/4] iio: gyro: add support for fxas21002c"
Previous message: Uecker, Martin: "Re: VLAs and security"
Next in thread: Afonso Bordado: "Re: [PATCH v2 1/4] iio: gyro: add support for fxas21002c"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, 2018-08-31 at 17:55 +0530, Himanshu Jha wrote:
> Hello Afonso,
>
> On Thu, Aug 30, 2018 at 10:18:22PM +0100, Afonso Bordado wrote:
> > FXAS21002C is a 3 axis gyroscope with integrated temperature sensor
> >
> > Signed-off-by: Afonso Bordado <afonsobordado@xxxxxx>
> > ---
> > Changes in v2
> > - Use ANSI C Comments
> > - Minor cleanups
> > - More dscriptive devicetree bindings
> >
> > drivers/iio/gyro/Kconfig | 11 +
> > drivers/iio/gyro/Makefile | 1 +
> > drivers/iio/gyro/fxas21002c.c | 367
> > ++++++++++++++++++++++++++++++++++
> > 3 files changed, 379 insertions(+)
> > create mode 100644 drivers/iio/gyro/fxas21002c.c
> >
> > diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> > index 3126cf05e6b9..d71e33ea9fa4 100644
> > --- a/drivers/iio/gyro/Kconfig
> > +++ b/drivers/iio/gyro/Kconfig
> > @@ -73,6 +73,17 @@ config BMG160_SPI
> > tristate
> > select REGMAP_SPI
> >
> > +config FXAS21002C
> > + tristate "Freescale FXAS21002C Gyroscope"
> > + depends on I2C
> > + select REGMAP_I2C
> > + help
> > + Say yes here to build support for the Freescale FXAS21002C
> > Gyroscope
> > + driver connected via I2C.
> > +
> > + This driver can also be built as a module. If so, the module
> > + will be called fxas21002c.
> > +
> > config HID_SENSOR_GYRO_3D
> > depends on HID_SENSOR_HUB
> > select IIO_BUFFER
> > diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
> > index 295ec780c4eb..ec3e2aeae92a 100644
> > --- a/drivers/iio/gyro/Makefile
> > +++ b/drivers/iio/gyro/Makefile
> > @@ -12,6 +12,7 @@ obj-$(CONFIG_ADXRS450) += adxrs450.o
> > obj-$(CONFIG_BMG160) += bmg160_core.o
> > obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o
> > obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o
> > +obj-$(CONFIG_FXAS21002C) += fxas21002c.o
> >
> > obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
> >
> > diff --git a/drivers/iio/gyro/fxas21002c.c
> > b/drivers/iio/gyro/fxas21002c.c
> > new file mode 100644
> > index 000000000000..261b73629544
> > --- /dev/null
> > +++ b/drivers/iio/gyro/fxas21002c.c
> > @@ -0,0 +1,367 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * FXAS21002C - Digital Angular Rate Gyroscope driver
> > + *
> > + * Copyright (c) 2018, Afonso Bordado <afonsobordado@xxxxxx>
> > + *
> > + * IIO driver for FXAS21002C (7-bit I2C slave address 0x20 or
> > 0x21).
> > + * Datasheet: https://www.nxp.com/docs/en/data-sheet/FXAS21002.pdf
> > + * TODO:
> > + * ODR / Scale Support
> > + * Devicetree
> > + * Power management
> > + * LowPass/HighPass Filters
> > + * Buffers
> > + * Interrupts
> > + * Alarms
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/i2c.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/sysfs.h>
> > +#include <linux/regmap.h>
>
> Nit: Alphabetical ordering would be nice.

Sure

> > +#define FXAS21002C_DRV_NAME "fxas21002c"
> > +
> > +#define FXAS21002C_MAX_TRANSITION_TIME_MS 61
> > +
> > +#define FXAS21002C_CHIP_ID 0xD7
> > +
> > +#define FXAS21002C_REG_STATUS 0x00
> > +#define FXAS21002C_REG_OUT_X_MSB 0x01
> > +#define FXAS21002C_REG_OUT_X_LSB 0x02
> > +#define FXAS21002C_REG_OUT_Y_MSB 0x03
> > +#define FXAS21002C_REG_OUT_Y_LSB 0x04
> > +#define FXAS21002C_REG_OUT_Z_MSB 0x05
> > +#define FXAS21002C_REG_OUT_Z_LSB 0x06
> > +#define FXAS21002C_REG_DR_STATUS 0x07
> > +#define FXAS21002C_REG_F_STATUS 0x08
> > +#define FXAS21002C_REG_F_SETUP 0x09
> > +#define FXAS21002C_REG_F_EVENT 0x0A
> > +#define FXAS21002C_REG_INT_SRC_FLAG 0x0B
> > +#define FXAS21002C_REG_WHO_AM_I 0x0C
> > +#define FXAS21002C_REG_CTRL_REG0 0x0D
> > +#define FXAS21002C_REG_RT_CFG 0x0E
> > +#define FXAS21002C_REG_RT_SRC 0x0F
> > +#define FXAS21002C_REG_RT_THS 0x10
> > +#define FXAS21002C_REG_RT_COUNT 0x11
> > +#define FXAS21002C_REG_TEMP 0x12
> > +
> > +#define FXAS21002C_REG_CTRL_REG1 0x13
> > +#define FXAS21002C_RST_BIT BIT(6)
> > +#define FXAS21002C_ACTIVE_BIT BIT(1)
> > +#define FXAS21002C_READY_BIT BIT(0)
> > +
> > +#define FXAS21002C_REG_CTRL_REG2 0x14
> > +#define FXAS21002C_REG_CTRL_REG3 0x15
> > +
> > +#define FXAS21002C_DEFAULT_ODR_HZ 800
> > +
> > +/* 0.0625 deg/s */
> > +#define FXAS21002C_DEFAULT_SENSITIVITY IIO_DEGREE_TO_RAD(62500)
> > +
> > +#define FXAS21002C_TEMP_SCALE 1000
> > +
> > +enum fxas21002c_id {
> > + ID_FXAS21002C,
> > +};
> > +
> > +enum fxas21002c_operating_mode {
> > + FXAS21002C_OM_BOOT,
> > + FXAS21002C_OM_STANDBY,
> > + FXAS21002C_OM_READY,
> > + FXAS21002C_OM_ACTIVE,
> > +};
> > +
> > +struct fxas21002c_data {
> > + struct i2c_client *client;
> > + struct regmap *regmap;
> > +};
> > +
> > +static const struct regmap_range fxas21002c_writable_ranges[] = {
> > + regmap_reg_range(FXAS21002C_REG_F_SETUP,
> > FXAS21002C_REG_F_SETUP),
> > + regmap_reg_range(FXAS21002C_REG_CTRL_REG0,
> > FXAS21002C_REG_RT_CFG),
> > + regmap_reg_range(FXAS21002C_REG_RT_THS,
> > FXAS21002C_REG_RT_COUNT),
> > + regmap_reg_range(FXAS21002C_REG_CTRL_REG1,
> > FXAS21002C_REG_CTRL_REG3),
> > +};
> > +
> > +static const struct regmap_access_table fxas21002c_writable_table
> > = {
> > + .yes_ranges = fxas21002c_writable_ranges,
> > + .n_yes_ranges = ARRAY_SIZE(fxas21002c_writable_ranges),
> > +};
> > +
> > +static const struct regmap_range fxas21002c_volatile_ranges[] = {
> > + regmap_reg_range(FXAS21002C_REG_STATUS,
> > FXAS21002C_REG_F_STATUS),
> > + regmap_reg_range(FXAS21002C_REG_F_EVENT,
> > FXAS21002C_REG_INT_SRC_FLAG),
> > + regmap_reg_range(FXAS21002C_REG_RT_COUNT,
> > FXAS21002C_REG_CTRL_REG1),
> > +};
> > +
> > +static const struct regmap_access_table fxas21002c_volatile_table
> > = {
> > + .yes_ranges = fxas21002c_volatile_ranges,
> > + .n_yes_ranges = ARRAY_SIZE(fxas21002c_volatile_ranges),
> > +};
> > +
> > +const struct regmap_config fxas21002c_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +
> > + .max_register = FXAS21002C_REG_CTRL_REG3,
> > + /* We don't specify a .rd_table because everything is readable
> > */
> > + .wr_table = &fxas21002c_writable_table,
> > + .volatile_table = &fxas21002c_volatile_table,
> > +};
> > +EXPORT_SYMBOL(fxas21002c_regmap_config);
>
> Is it necessary to export ?
>
> Well, if you have plans in future to add SPI support
> then probably it is essential. But for now it isn't.
>
> Also, maybe adding SPI support in TODO ?

Sure

> > +#define FXAS21002C_GYRO_CHAN(_axis) {
> > \
> > + .type = IIO_ANGL_VEL,
> > \
> > + .modified = 1,
> > \
> > + .channel2 = IIO_MOD_ ## _axis,
> > \
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> > \
> > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
> > \
> > + BIT(IIO_CHAN_INFO_SAMP_FREQ), \
> > + .address = FXAS21002C_REG_OUT_ ## _axis ## _MSB, \
> > +}
> > +
> > +static const struct iio_chan_spec fxas21002c_channels[] = {
> > + {
> > + .type = IIO_TEMP,
> > + .address = FXAS21002C_REG_TEMP,
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE),
> > + },
> > + FXAS21002C_GYRO_CHAN(X),
> > + FXAS21002C_GYRO_CHAN(Y),
> > + FXAS21002C_GYRO_CHAN(Z),
> > + IIO_CHAN_SOFT_TIMESTAMP(3),
> > +};
> > +
> > +static int fxas21002c_set_operating_mode(struct fxas21002c_data
> > *data,
> > + enum fxas21002c_operating_mode
> > om)
>
> If you plan to send a new version, then align this as:
>
> static int fxas21002c_set_operating_mode(struct fxas21002c_data
> *data,
> enum fxas21002c_operating_mode
> om)

See my comment at the bottom.

> > +{
> > + int ret;
> > + int mask;
> > +
> > + switch (om) {
> > + case FXAS21002C_OM_STANDBY:
> > + mask = 0;
> > + break;
> > + case FXAS21002C_OM_READY:
> > + mask = FXAS21002C_READY_BIT;
> > + break;
> > + case FXAS21002C_OM_ACTIVE:
> > + mask = FXAS21002C_ACTIVE_BIT;
> > + break;
> > +
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + ret = regmap_write(data->regmap, FXAS21002C_REG_CTRL_REG1,
> > mask);
> > + if (ret) {
> > + dev_err(&data->client->dev,
> > + "could not switch operating mode\n");
> > + return ret;
> > + }
> > +
> > + msleep(FXAS21002C_MAX_TRANSITION_TIME_MS);
> > +
> > + return 0;
> > +}
> > +
> > +static void fxas21002c_standby(void *_data)
> > +{
> > + struct fxas21002c_data *data = _data;
> > +
> > + fxas21002c_set_operating_mode(data, FXAS21002C_OM_STANDBY);
> > +}
> > +
> > +static int fxas21002c_reset(struct fxas21002c_data *data)
> > +{
> > + int ret;
> > +
> > + /*
> > + * On issuing a Software Reset command over an I2C interface,
> > + * the device immediately resets and does not send any
> > + * acknowledgment (ACK) of the written byte to the Master.
> > + *
> > + * This is documented in table 46 on the datasheet. Due to this
> > + * the write will fail with EREMOTEIO.
> > + */
> > + ret = regmap_write(data->regmap,
> > + FXAS21002C_REG_CTRL_REG1,
> > FXAS21002C_RST_BIT);
> > +
> > + if (ret != -EREMOTEIO) {
> > + dev_err(&data->client->dev, "could not reset
> > device\n");
> > + return ret;
> > + }
> > +
> > + regcache_mark_dirty(data->regmap);
> > +
> > + /* Wait for device to boot up */
> > + msleep(FXAS21002C_MAX_TRANSITION_TIME_MS);
> > +
> > + return 0;
> > +}
> > +
> > +static int fxas21002c_verify_chip(struct fxas21002c_data *data)
> > +{
> > + int ret;
> > + int chip_id;
> > +
> > + ret = regmap_read(data->regmap, FXAS21002C_REG_WHO_AM_I,
> > &chip_id);
>
> Is this correct ?
> regmap_read() needs unsigned int * as a the third agrument. This
> warning is
> usually prompted on compilation IIRC and build shall fail!

Thanks. I didn't catch that. And I got no warnings when building it.
I've switched all calls of regmap_read to use unsigned int

> > + if (ret) {
> > + dev_err(&data->client->dev, "could not read device
> > id\n");
> > + return ret;
> > + }
> > +
> > + if (chip_id != FXAS21002C_CHIP_ID) {
> > + dev_err(&data->client->dev,
> > + "unsupported chip id %02x\n", chip_id);
>
> ^ %02d ?
>
> I have been skimming through the kernel source for a few a while and
> have observed often that we ignore "-Wformat-signedness" warnings ?
>
> -Wformat-signedness:
> https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html
> "If -Wformat is specified, also warn if the format string requires
> an unsigned argument and the argument is signed and vice versa."
>
> And the ISO-C11 Standard says:
> https://port70.net/~nsz/c/c11/n1570.html#7.21.6.1p9
>
> "If a conversion specification is invalid, the behavior is
> undefined.
> If any argument is not the correct type for the corresponding
> conversion specification, the behavior is *undefined*."
>
> Undefined Behavior:
> ------------------
>
> In the C community, undefined behavior may be humorously referred to
> as "nasal demons",
> after a comp.std.c post that explained undefined behavior as allowing
> the compiler to
> do _anything_ it chooses, even "to make demons fly out of your nose"
>
> And Paul E. McKenney comments on compiler writers:
> https://lwn.net/Articles/508999/
>
> "I have seen the glint in their eyes when they discuss optimization
> techniques that you would not want your children to know about!"
>
>
> You may try and check the compiler warning by building source with
> "-Wformat-signedness" flag.
>
> Otherwise, you can avoid my comment and call me a language-lawyer ;)

Fixed in v3

> > + return -ENODEV;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int fxas21002c_read_oneshot(struct fxas21002c_data *data,
> > + struct iio_chan_spec const *chan,
> > int *val)
>
> Similar alignment here.
>
> > + int ret;
> > + __be16 bulk_raw;
> > +
> > + switch (chan->type) {
> > + case IIO_ANGL_VEL:
> > + ret = regmap_bulk_read(data->regmap, chan->address,
> > + &bulk_raw, sizeof(bulk_raw));
> > + if (ret)
> > + return ret;
> > +
> > + *val = sign_extend32(be16_to_cpu(bulk_raw), 15);
> > + return IIO_VAL_INT;
> > + case IIO_TEMP:
> > + ret = regmap_read(data->regmap, chan->address, val);
> > + if (ret)
> > + return ret;
> > +
> > + return IIO_VAL_INT;
> > + default:
> > + return -EINVAL;
> > + }
> > +}
> > +
> > +static int fxas21002c_read_raw(struct iio_dev *indio_dev,
> > + struct iio_chan_spec const *chan, int
> > *val,
> > + int *val2, long mask)
>
> Similarly here.
>
> static int fxas21002c_read_raw(struct iio_dev *indio_dev,
> struct iio_chan_spec const *chan, int
> *val,
> int *val2, long mask)
>

I don't think these are misaligned, I think they are shown wrongly on
the diff due to the way tabs are presented when there are preceding
characters.

If you look at my quote of your aligned function, its also misaligned
now. I also compared, we have exactly the same whitespace preceding
struct iio_chan_spec.

> Thanks

Next message: Afonso Bordado: "Re: [PATCH v2 1/4] iio: gyro: add support for fxas21002c"
Previous message: Uecker, Martin: "Re: VLAs and security"
Next in thread: Afonso Bordado: "Re: [PATCH v2 1/4] iio: gyro: add support for fxas21002c"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]