Re: [PATCH v3 3/4] iio: fxas21002c: add ODR/Scale support

[Andy Shevchenko]

On Tue, Sep 4, 2018 at 10:07 PM Afonso Bordado <afonsobordado@xxxxxx> wrote:
>
> This patch adds support for reading/writing ODR/Scale
>
> We don't support the scale boost modes.

> @@ -44,7 +44,10 @@
>  #define FXAS21002C_REG_F_EVENT         0x0A
>  #define FXAS21002C_REG_INT_SRC_FLAG    0x0B
>  #define FXAS21002C_REG_WHO_AM_I        0x0C
> +
>  #define FXAS21002C_REG_CTRL_REG0       0x0D
> +#define FXAS21002C_SCALE_MASK          GENMASK(1, 0)
> +
>  #define FXAS21002C_REG_RT_CFG          0x0E
>  #define FXAS21002C_REG_RT_SRC          0x0F
>  #define FXAS21002C_REG_RT_THS          0x10

This hunk doesn't belong to this patch.

> +static const int fxas21002c_anglevel_scale_avail[4][2] = {
> +       [FXAS21002C_SCALE_62MDPS] = { 0, IIO_DEGREE_TO_RAD(62500) },
> +       [FXAS21002C_SCALE_31MDPS] = { 0, IIO_DEGREE_TO_RAD(31250) },
> +       [FXAS21002C_SCALE_15MDPS] = { 0, IIO_DEGREE_TO_RAD(15625) },
> +       [FXAS21002C_SCALE_7MDPS]  = { 0, IIO_DEGREE_TO_RAD(7812) },

This is just set of powers of two. No table needed.

> +};

> +static const int fxas21002c_sample_freq_avail[7][2] = {
> +       [FXAS21002C_ODR_800]  = { 800, 0 },
> +       [FXAS21002C_ODR_400]  = { 400, 0 },
> +       [FXAS21002C_ODR_200]  = { 200, 0 },
> +       [FXAS21002C_ODR_100]  = { 100, 0 },
> +       [FXAS21002C_ODR_50]   = { 50, 0 },
> +       [FXAS21002C_ODR_25]   = { 25, 0 },
> +       [FXAS21002C_ODR_12_5] = { 12, 500000 },

Ditto.

> +};


--
With Best Regards,
Andy Shevchenko