Re: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
From: Hans de Goede
Date: Thu Sep 06 2018 - 08:54:51 EST
Hi,
On 06-09-18 14:51, Suman Tripathi wrote:
Hi Hans,
I ran checkpatch and see no error. I will check my git-send-email
Right, the problem is not with the patch, but with your email client
mangling the file.
git send-email will send the patch for you without damaging it.
Regards,
Hans
scripts/checkpatch.pl 0001-ata-Disable-AHCI-ALPM-feature-for-Ampere-Computing-e.patch total: 0 errors, 0 warnings, 39 lines checked
0001-ata-Disable-AHCI-ALPM-feature-for-Ampere-Computing-e.patch has no obvious style problems and is ready for submission.
With regards,
Suman
-----Original Message-----
From: Hans de Goede <hdegoede@xxxxxxxxxx>
Sent: Thursday, September 6, 2018 12:32 AM
To: Suman Tripathi <stripathi@xxxxxxxxxxxxxxxxxxx>; axboe@xxxxxxxxx; tj@xxxxxxxxxx; linux-ide@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; joe@xxxxxxxxxxx; arnd@xxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx
Cc: Open Source Submission <patches@xxxxxxxxxxxxxxxxxxx>; Rameshwar Sahu <Rameshwar.Sahu@xxxxxxxxxxxxxxxxxxx>
Subject: Re: [PATCH v3] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA
[NOTICE: This email originated from an external sender. Please be mindful of safe email handling and proprietary information protection practices.] ________________________________________________________________________________________________________________________
Hi,
On 06-09-18 06:33, Suman Tripathi wrote:
Due to hardware errata, Ampere Computing eMAG SATA can't support AHCI
ALPM feature. This patch disables the AHCI ALPM feature for eMAG SATA.
Changes for v2:
* Introduce the new ata_port_info object which includes ATA_FLAG_NO_LPM.
* Include this object for eMAG SATA inside the acpi match table.
* Retrieve the ata_port_info from the acpi match table.
Changes for v3:
* Fix the indentation and whitespace warnings.
Signed-off-by: Suman Trpathi <stripathi@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Rameshwar Prasad Sahu
<rameshwar.sahu@xxxxxxxxxxxxxxxxxxx>
Small remark, normally the changelog is put after the Signed-off-by messages like
this:
"""
Signed-off-by: Suman Trpathi <stripathi@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Rameshwar Prasad Sahu <rameshwar.sahu@xxxxxxxxxxxxxxxxxxx>
---
Changes for v3:
* Fix the indentation and whitespace warnings.
Changes for v2:
* Introduce the new ata_port_info object which includes ATA_FLAG_NO_LPM.
* Include this object for eMAG SATA inside the acpi match table.
* Retrieve the ata_port_info from the acpi match table.
"""
This will cause git am to remove it, so that the git history just has your original commit message.
By itself this would not be a reason to request a new version, but it seems you've copy and pasted the patch from "git format-patch" output into you mail client. I tried to run checkpatch myself to make sure you caught all whitespace issues and I got this:
[hans@shalem linux]$ scripts/checkpatch.pl ~/\[PATCH\ v3\]\ ata\:\ Disable\ AHCI\ ALPM\ feature\ for\ Ampere\ Computing\ eMAG\ SATA.eml
ERROR: patch seems to be corrupt (line wrapped?)
#177: FILE: drivers/ata/ahci_platform.c:34:
ERROR: DOS line endings
#178: FILE: drivers/ata/ahci_platform.c:35:
+static const struct ata_port_info ahci_port_info_nolpm = {^M$
ERROR: DOS line endings
#179: FILE: drivers/ata/ahci_platform.c:36:
+^I.flags^I^I= AHCI_FLAG_COMMON | ATA_FLAG_NO_LPM,^M$
ERROR: DOS line endings
#180: FILE: drivers/ata/ahci_platform.c:37:
+^I.pio_mask^I= ATA_PIO4,^M$
ERROR: DOS line endings
#181: FILE: drivers/ata/ahci_platform.c:38:
+^I.udma_mask^I= ATA_UDMA6,^M$
Followed by lots more errors, line 177 of the email is empty, while it should contain a single space. This stripping of whitespace typically is the result of copy pasting or some other processing of the patch.
Please try to re-send v3 using the "git send-email" command, so that we get a patch which we can actually apply.
Regards,
Hans
---
drivers/ata/ahci_platform.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 99f9a89..9ba283f 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -33,6 +33,13 @@ static const struct ata_port_info ahci_port_info = {
.port_ops = &ahci_platform_ops,
};
+static const struct ata_port_info ahci_port_info_nolpm = {
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_LPM,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
@@ -41,6 +48,7 @@ static int ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
+ const struct ata_port_info *port;
int rc;
hpriv = ahci_platform_get_resources(pdev);
@@ -57,7 +65,11 @@ static int ahci_probe(struct platform_device *pdev)
if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
- rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info,
+ port = acpi_device_get_match_data(dev);
+ if (!port)
+ port = &ahci_port_info;
+
+ rc = ahci_platform_init_host(pdev, hpriv, port,
&ahci_platform_sht);
if (rc)
goto disable_resources;
@@ -85,6 +97,7 @@ static const struct of_device_id ahci_of_match[] = {
MODULE_DEVICE_TABLE(of, ahci_of_match);
static const struct acpi_device_id ahci_acpi_match[] = {
+ { "APMC0D33", (unsigned long)&ahci_port_info_nolpm },
{ ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) },
{},
};
--
2.7.4