[PATCH v2] ARM: s3c24xx: Correct SD card write protect detection on Mini2440

[Cedric Roux]

The mini2440 computer uses "active high" to signal that the "write protect"
of the inserted MMC is set. The current code uses the opposite, leading to
a wrong detection of write protection. The solution is simply to use
".wprotect_invert = 1" in the description of the MMC.

Signed-off-by: Cedric Roux <sed@xxxxxxx>
---
 arch/arm/mach-s3c24xx/mach-mini2440.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 95753e0..4cd8d45 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -232,10 +232,11 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 /* MMC/SD  */
 
 static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
-   .gpio_detect   = S3C2410_GPG(8),
-   .gpio_wprotect = S3C2410_GPH(8),
-   .set_power     = NULL,
-   .ocr_avail     = MMC_VDD_32_33|MMC_VDD_33_34,
+	.wprotect_invert = 1,
+	.gpio_detect   = S3C2410_GPG(8),
+	.gpio_wprotect = S3C2410_GPH(8),
+	.set_power     = NULL,
+	.ocr_avail     = MMC_VDD_32_33|MMC_VDD_33_34,
 };
 
 /* NAND Flash on MINI2440 board */
-- 
2.18.0