Re: [PATCH 2/2] mtd: nand: esmt: retrieve ecc requirements from 5th id byte

[Miquel Raynal]

Hi Marcel,

Boris Brezillon <boris.brezillon@xxxxxxxxxxx> wrote on Thu, 6 Sep 2018
22:44:22 +0200:

> On Thu,  6 Sep 2018 10:49:22 +0200
> Marcel Ziswiler <marcel@xxxxxxxxxxxx> wrote:
> 
> > From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> > 
> > This patch enables support to read the ECC level from the NAND flash
> > using ESMT SLC NAND ID byte 5 information as documented e.g. in the
> > following data sheet:
> > 
> > https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F59L1G81LA(2Y).pdf
> > 
> > Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> > 
> > ---
> > 
> >  drivers/mtd/nand/raw/nand_esmt.c | 46 ++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> >  create mode 100644 drivers/mtd/nand/raw/nand_esmt.c
> > 
> > diff --git a/drivers/mtd/nand/raw/nand_esmt.c b/drivers/mtd/nand/raw/nand_esmt.c
> > new file mode 100644
> > index 000000000000..360d351ac043
> > --- /dev/null
> > +++ b/drivers/mtd/nand/raw/nand_esmt.c
> > @@ -0,0 +1,46 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2018 Toradex AG
> > + *
> > + * Author: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> > + */
> > +
> > +#include <linux/mtd/rawnand.h>
> > +
> > +static void esmt_nand_decode_id(struct nand_chip *chip)
> > +{
> > +	nand_decode_ext_id(chip);
> > +
> > +	/* Extract ECC requirements from 5th id byte. */
> > +	if (chip->id.len >= 5 && nand_is_slc(chip)) {
> > +		chip->ecc_step_ds = 512;
> > +		switch (chip->id.data[4] & 0x3) {
> > +		case 0x0:
> > +			chip->ecc_strength_ds = 4;
> > +			break;
> > +		case 0x1:
> > +			chip->ecc_strength_ds = 2;
> > +			break;
> > +		case 0x2:
> > +			chip->ecc_strength_ds = 1;
> > +			break;
> > +		default:
> > +			WARN(1, "Could not get ECC info");
> > +			chip->ecc_step_ds = 0;
> > +			break;
> > +		}
> > +	}
> > +}
> > +
> > +static int esmt_nand_init(struct nand_chip *chip)
> > +{
> > +	if (nand_is_slc(chip))
> > +		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
> > +
> > +	return 0;
> > +}
> > +
> > +const struct nand_manufacturer_ops esmt_nand_manuf_ops = {
> > +	.detect = esmt_nand_decode_id,
> > +	.init = esmt_nand_init,
> > +};  
> 
> Looks like you forgot to hook the new esmt_nand_manuf_ops to the ESMT
> entry (in the nand_manufacturer table), so as is, the patch is not
> exactly adding support for ECC req parsing ;-).

I missed that.

Will drop both patches from nand/next, waiting for a v2 (please also
reorder the macros in patch 1 as suggested).

Thanks,
MiquÃl