[PATCH 5/6] ARM: dts: qcom-msm8974: use named constant for interrupt flag NONE

[frowand . list]

From: Frank Rowand <frank.rowand@xxxxxxxx>

Cosmetic change of integer value "0" in the third field of the
"interrupts" property to the correct named constant.

Signed-off-by: Frank Rowand <frank.rowand@xxxxxxxx>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index c7198900b426..1e54113d6d9a 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -586,7 +586,7 @@
 		blsp1_uart1: serial@f991d000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991d000 0x1000>;
-			interrupts = <GIC_SPI 107 0x0>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_NONE>;
 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
@@ -595,7 +595,7 @@
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
-			interrupts = <GIC_SPI 108 0x0>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
 			status = "disabled";
@@ -605,8 +605,8 @@
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 123 0>,
-				     <GIC_SPI 138 0>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,
+				     <GIC_SPI 138 IRQ_TYPE_NONE>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&gcc GCC_SDCC1_AHB_CLK>,
@@ -633,8 +633,8 @@
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc_mem", "core_mem";
-			interrupts = <GIC_SPI 125 0>,
-				     <GIC_SPI 221 0>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_NONE>,
+				     <GIC_SPI 221 IRQ_TYPE_NONE>;
 			interrupt-names = "hc_irq", "pwr_irq";
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&gcc GCC_SDCC2_AHB_CLK>,
@@ -701,7 +701,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 208 0>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_NONE>;
 		};
 
 		i2c@f9924000 {
@@ -746,7 +746,7 @@
 			      <0xfc4cb000 0x1000>,
 			      <0xfc4ca000 0x1000>;
 			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 0>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
 			#address-cells = <2>;
-- 
Frank Rowand <frank.rowand@xxxxxxxx>