[PATCH v1 0/5] add quartz load support to NXP rtc drivers

[Sam Ravnborg]

The current rtc drivers for NXP pcf8523 and pcf85063
have different configuration of the quartz load.

pcf8523 hardcode the quartz load to 12.5 Pf
pcf85063 uses the reset default of 7 pF

Introduce a new property to the bindings for the two
rtc devices to specify if the quartz load is 12.5 pF.

Update all in-kernel DT files using the pcf8523 to specify this property.
And finally update the drivers to support the property.

NOTE:
This has the side-effect that any users of the
pcf8523 driver using out-of-tree DTS files needs to
add the new property to get the same behaviour as before.

	Sam

SÃren Andersen (5):
      dt-binding: rtci-pcf8523: add binding with quartz_load property
      dt-binding: rtc-pcf85063: add binding with quartz load property
      dts: add nxp,quartz_load_12.5pf to all pcf8523 nodes
      rtc: pcf8523: add quartz load configuration from DT
      rtc: pcf85063: add quartz load configuration from DT

 .../devicetree/bindings/rtc/nxp,pcf85063.txt       | 19 +++++++++++++
 .../devicetree/bindings/rtc/nxp,pcf8523.txt        | 19 +++++++++++++
 .../devicetree/bindings/trivial-devices.txt        |  2 --
 arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts       |  1 +
 arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts         |  1 +
 arch/arm/boot/dts/imx6q-h100.dts                   |  1 +
 arch/arm/boot/dts/imx6q-novena.dts                 |  1 +
 arch/arm/boot/dts/imx6qdl-cubox-i.dtsi             |  1 +
 arch/arm/boot/dts/imx6qdl-hummingboard.dtsi        |  1 +
 arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi       |  1 +
 drivers/rtc/rtc-pcf85063.c                         | 31 ++++++++++++++++++++++
 drivers/rtc/rtc-pcf8523.c                          |  6 ++---
 12 files changed, 79 insertions(+), 5 deletions(-)