[PATCH v2 19/22] pinctrl: mediatek: extend advanced pull support in pinctrl-mtk-common-v2.c
From: sean.wang
Date: Sat Sep 08 2018 - 07:08:04 EST
From: Sean Wang <sean.wang@xxxxxxxxxxxx>
Extend the advanced pull based on the legacy bias plus additional r0 and r1
to tweak the resistor level.
Signed-off-by: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
---
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 37 ++++++++++++++++++++----
1 file changed, 32 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 7cdd46f..7d5f570 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -476,6 +476,19 @@ int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PUPD, arg);
+ /* If PUPD register is not supported for that pin, let's fallback to
+ * general bias control.
+ */
+ if (err == -ENOTSUPP) {
+ if (hw->soc->bias_set) {
+ err = hw->soc->bias_set(hw, desc, pullup);
+ if (err)
+ return err;
+ } else {
+ return -ENOTSUPP;
+ }
+ }
+
return err;
}
@@ -487,12 +500,26 @@ int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
int err;
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PUPD, &t);
- if (err)
- return err;
- /* t == 0 supposes PULLUP for the customized PULL setup */
- if (pullup ^ !t)
- return -EINVAL;
+ /* If PUPD register is not supported for that pin, let's fallback to
+ * general bias control.
+ */
+ if (err == -ENOTSUPP) {
+ if (hw->soc->bias_get) {
+ err = hw->soc->bias_get(hw, desc, pullup, val);
+ if (err)
+ return err;
+ } else {
+ return -ENOTSUPP;
+ }
+ } else {
+ /* t == 0 supposes PULLUP for the customized PULL setup */
+ if (err)
+ return err;
+
+ if (pullup ^ !t)
+ return -EINVAL;
+ }
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R0, &t);
if (err)
--
2.7.4