Re: [PATCH v2] HID: i2c-hid: Don't reset device upon system resume

[Hans de Goede]

Hi,

On 06-09-18 04:55, Kai-Heng Feng wrote:
> Raydium touchscreen triggers interrupt storm after system-wide suspend:
> [ 179.085033] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete
> report (58/65535)
>
> According to Raydium, Windows driver does not reset the device after
> system resume.
>
> The HID over I2C spec does specify a reset should be used at
> intialization, but it doesn't specify if reset is required for system
> suspend.
>
> Tested this patch on other i2c-hid touchpanels I have and those
> touchpanels do work after S3 without doing reset. If any regression
> happens to other touchpanel vendors, we can use quirk for Raydium
> devices.
>
> There's still one device uses I2C_HID_QUIRK_RESEND_REPORT_DESCR so keep
> it there.

I added that quirk and I still have the hardware for it. I've tested
things with the quirk remove and the touchscreen works after resume
now without the quirk.

I also have some other devices with a SIS i2c-hid touchscreen which
would no longer work after resume where the quirk did not help.

I had looking into those on my TODO but did not get around to
this yet. I've re-tested those with this patch and I'm happy to report
that this patch also fixes resume on the SIS touchscreens in the
following models:

Asus T100HA
Asus T200TA
Peaq C1010

Regards,

Hans



> Cc: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>
> Cc: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> ---
> v2:
>   Remove Raydium devices' ID and quirk.
>   Rewording.
>
>   drivers/hid/hid-ids.h         |  4 ----
>   drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++------
>   2 files changed, 7 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> index 7da93d789080..e254ae802688 100644
> --- a/drivers/hid/hid-ids.h
> +++ b/drivers/hid/hid-ids.h
> @@ -530,10 +530,6 @@
>   #define I2C_VENDOR_ID_HANTICK		0x0911
>   #define I2C_PRODUCT_ID_HANTICK_5288	0x5288
>   
> -#define I2C_VENDOR_ID_RAYD		0x2386
> -#define I2C_PRODUCT_ID_RAYD_3118	0x3118
> -#define I2C_PRODUCT_ID_RAYD_4B33	0x4B33
> -
>   #define USB_VENDOR_ID_HANWANG		0x0b57
>   #define USB_DEVICE_ID_HANWANG_TABLET_FIRST	0x5000
>   #define USB_DEVICE_ID_HANWANG_TABLET_LAST	0x8fff
> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> index 57126f6837bb..f3076659361a 100644
> --- a/drivers/hid/i2c-hid/i2c-hid.c
> +++ b/drivers/hid/i2c-hid/i2c-hid.c
> @@ -170,12 +170,8 @@ static const struct i2c_hid_quirks {
>   		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
>   	{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
>   		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
> -	{ I2C_VENDOR_ID_RAYD, I2C_PRODUCT_ID_RAYD_3118,
> -		I2C_HID_QUIRK_RESEND_REPORT_DESCR },
>   	{ USB_VENDOR_ID_SIS_TOUCH, USB_DEVICE_ID_SIS10FB_TOUCH,
>   		I2C_HID_QUIRK_RESEND_REPORT_DESCR },
> -	{ I2C_VENDOR_ID_RAYD, I2C_PRODUCT_ID_RAYD_4B33,
> -		I2C_HID_QUIRK_RESEND_REPORT_DESCR },
>   	{ 0, 0 }
>   };
>   
> @@ -1237,11 +1233,16 @@ static int i2c_hid_resume(struct device *dev)
>   	pm_runtime_enable(dev);
>   
>   	enable_irq(client->irq);
> -	ret = i2c_hid_hwreset(client);
> +
> +	/* Instead of resetting device, simply powers the device on. This
> +	 * solves "incomplete reports" on Raydium devices 2386:3118 and
> +	 * 2386:4B33
> +	 */
> +	ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
>   	if (ret)
>   		return ret;
>   
> -	/* RAYDIUM device (2386:3118) need to re-send report descr cmd
> +	/* Some devices need to re-send report descr cmd
>   	 * after resume, after this it will be back normal.
>   	 * otherwise it issues too many incomplete reports.
>   	 */