Re: [PATCH net-next v2 3/5] virtio_ring: add packed ring support
From: Tiwei Bie
Date: Sun Sep 09 2018 - 22:33:13 EST
On Fri, Sep 07, 2018 at 09:49:14AM -0400, Michael S. Tsirkin wrote:
> On Wed, Jul 11, 2018 at 10:27:09AM +0800, Tiwei Bie wrote:
> > This commit introduces the support (without EVENT_IDX) for
> > packed ring.
> >
> > Signed-off-by: Tiwei Bie <tiwei.bie@xxxxxxxxx>
> > ---
> > drivers/virtio/virtio_ring.c | 495 ++++++++++++++++++++++++++++++++++-
> > 1 file changed, 487 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
> > index c4f8abc7445a..f317b485ba54 100644
> > --- a/drivers/virtio/virtio_ring.c
> > +++ b/drivers/virtio/virtio_ring.c
> > @@ -55,12 +55,21 @@
> > #define END_USE(vq)
> > #endif
> >
> > +#define _VRING_DESC_F_AVAIL(b) ((__u16)(b) << 7)
> > +#define _VRING_DESC_F_USED(b) ((__u16)(b) << 15)
>
> Underscore followed by an upper case letter isn't a good idea
> for a symbol. And it's not nice that this does not
> use the VRING_DESC_F_USED from the header.
> How about ((b) ? VRING_DESC_F_USED : 0) instead?
> Is produced code worse then?
Yes, I think the produced code is worse when we use
conditional expression. Below is a simple test:
#define foo1(b) ((b) << 10)
#define foo2(b) ((b) ? (1 << 10) : 0)
unsigned short bar(unsigned short b)
{
return foo1(b);
}
unsigned short baz(unsigned short b)
{
return foo2(b);
}
With `gcc -O3 -S`, I got below assembly code:
.file "tmp.c"
.text
.p2align 4,,15
.globl bar
.type bar, @function
bar:
.LFB0:
.cfi_startproc
movl %edi, %eax
sall $10, %eax
ret
.cfi_endproc
.LFE0:
.size bar, .-bar
.p2align 4,,15
.globl baz
.type baz, @function
baz:
.LFB1:
.cfi_startproc
xorl %eax, %eax
testw %di, %di
setne %al
sall $10, %eax
ret
.cfi_endproc
.LFE1:
.size baz, .-baz
.ident "GCC: (Debian 8.2.0-4) 8.2.0"
.section .note.GNU-stack,"",@progbits
That is to say, for `((b) << 10)`, it will shift the
register directly. But for `((b) ? (1 << 10) : 0)`,
in above code, it will zero eax first, and set al
to 1 depend on whether di is 0, and shift eax.
>
> > +
> > struct vring_desc_state {
> > void *data; /* Data for callback. */
> > struct vring_desc *indir_desc; /* Indirect descriptor, if any. */
> > };
> >
> > struct vring_desc_state_packed {
> > + void *data; /* Data for callback. */
> > + struct vring_packed_desc *indir_desc; /* Indirect descriptor, if any. */
>
> Include vring_desc_state for these?
Sure.
>
> > + int num; /* Descriptor list length. */
> > + dma_addr_t addr; /* Buffer DMA addr. */
> > + u32 len; /* Buffer length. */
> > + u16 flags; /* Descriptor flags. */
>
> This seems only to be used for indirect. Check indirect field above
> instead and drop this.
The `flags` is also needed to know the direction, i.e. DMA_FROM_DEVICE
or DMA_TO_DEVICE when do DMA unmap.
>
> > int next; /* The next desc state. */
>
> Packing things into 16 bit integers will help reduce
> cache pressure here.
>
> Also, this is only used for unmap, so when dma API is not used,
> maintaining addr and len list management is unnecessary. How about we
> maintain addr/len in a separate array, avoiding accesses on unmap in that case?
Sure. I'll give it a try.
>
> Also, lots of architectures have a nop unmap in the DMA API.
> See a proposed patch at the end for optimizing that case.
Got it. Thanks.
>
> > };
> >
> > @@ -660,7 +669,6 @@ static bool virtqueue_poll_split(struct virtqueue *_vq, unsigned last_used_idx)
> > {
> > struct vring_virtqueue *vq = to_vvq(_vq);
> >
> > - virtio_mb(vq->weak_barriers);
> > return (u16)last_used_idx != virtio16_to_cpu(_vq->vdev, vq->vring.used->idx);
> > }
>
> why is this changing the split queue implementation?
Because above barrier is also needed by virtqueue_poll_packed(),
so I moved it to virtqueue_poll() and also added some comments
for it.
>
>
> >
> > @@ -757,6 +765,72 @@ static inline unsigned vring_size_packed(unsigned int num, unsigned long align)
> > & ~(align - 1)) + sizeof(struct vring_packed_desc_event) * 2;
> > }
> >
> > +static void vring_unmap_state_packed(const struct vring_virtqueue *vq,
> > + struct vring_desc_state_packed *state)
> > +{
> > + u16 flags;
> > +
> > + if (!vring_use_dma_api(vq->vq.vdev))
> > + return;
> > +
> > + flags = state->flags;
> > +
> > + if (flags & VRING_DESC_F_INDIRECT) {
> > + dma_unmap_single(vring_dma_dev(vq),
> > + state->addr, state->len,
> > + (flags & VRING_DESC_F_WRITE) ?
> > + DMA_FROM_DEVICE : DMA_TO_DEVICE);
> > + } else {
> > + dma_unmap_page(vring_dma_dev(vq),
> > + state->addr, state->len,
> > + (flags & VRING_DESC_F_WRITE) ?
> > + DMA_FROM_DEVICE : DMA_TO_DEVICE);
> > + }
> > +}
> > +
> > +static void vring_unmap_desc_packed(const struct vring_virtqueue *vq,
> > + struct vring_packed_desc *desc)
> > +{
> > + u16 flags;
> > +
> > + if (!vring_use_dma_api(vq->vq.vdev))
> > + return;
> > +
> > + flags = virtio16_to_cpu(vq->vq.vdev, desc->flags);
>
> I see no reason to use virtioXX wrappers for the packed ring.
> That's there to support legacy devices. Just use leXX.
Okay.
>
> > +
> > + if (flags & VRING_DESC_F_INDIRECT) {
> > + dma_unmap_single(vring_dma_dev(vq),
> > + virtio64_to_cpu(vq->vq.vdev, desc->addr),
> > + virtio32_to_cpu(vq->vq.vdev, desc->len),
> > + (flags & VRING_DESC_F_WRITE) ?
> > + DMA_FROM_DEVICE : DMA_TO_DEVICE);
> > + } else {
> > + dma_unmap_page(vring_dma_dev(vq),
> > + virtio64_to_cpu(vq->vq.vdev, desc->addr),
> > + virtio32_to_cpu(vq->vq.vdev, desc->len),
> > + (flags & VRING_DESC_F_WRITE) ?
> > + DMA_FROM_DEVICE : DMA_TO_DEVICE);
> > + }
> > +}
> > +
> > +static struct vring_packed_desc *alloc_indirect_packed(struct virtqueue *_vq,
> > + unsigned int total_sg,
> > + gfp_t gfp)
> > +{
> > + struct vring_packed_desc *desc;
> > +
> > + /*
> > + * We require lowmem mappings for the descriptors because
> > + * otherwise virt_to_phys will give us bogus addresses in the
> > + * virtqueue.
>
> Where is virt_to_phys used? I don't see it in this patch.
In vring_map_single(), virt_to_phys() will be used to translate
the address to phys if dma api isn't used:
https://github.com/torvalds/linux/blob/a49a9dcce802/drivers/virtio/virtio_ring.c#L197
>
> > + */
> > + gfp &= ~__GFP_HIGHMEM;
> > +
> > + desc = kmalloc(total_sg * sizeof(struct vring_packed_desc), gfp);
> > +
> > + return desc;
> > +}
> > +
> > static inline int virtqueue_add_packed(struct virtqueue *_vq,
> > struct scatterlist *sgs[],
> > unsigned int total_sg,
> > @@ -766,47 +840,449 @@ static inline int virtqueue_add_packed(struct virtqueue *_vq,
> > void *ctx,
> > gfp_t gfp)
> > {
> > + struct vring_virtqueue *vq = to_vvq(_vq);
> > + struct vring_packed_desc *desc;
> > + struct scatterlist *sg;
> > + unsigned int i, n, descs_used, uninitialized_var(prev), err_idx;
> > + __virtio16 uninitialized_var(head_flags), flags;
> > + u16 head, avail_wrap_counter, id, curr;
> > + bool indirect;
> > +
> > + START_USE(vq);
> > +
> > + BUG_ON(data == NULL);
> > + BUG_ON(ctx && vq->indirect);
> > +
> > + if (unlikely(vq->broken)) {
> > + END_USE(vq);
> > + return -EIO;
> > + }
> > +
> > +#ifdef DEBUG
> > + {
> > + ktime_t now = ktime_get();
> > +
> > + /* No kick or get, with .1 second between? Warn. */
> > + if (vq->last_add_time_valid)
> > + WARN_ON(ktime_to_ms(ktime_sub(now, vq->last_add_time))
> > + > 100);
> > + vq->last_add_time = now;
> > + vq->last_add_time_valid = true;
> > + }
> > +#endif
>
> Add incline helpers for this debug stuff rather than
> duplicate it from split ring?
Sure. I'd like to do that.
>
>
> > +
> > + BUG_ON(total_sg == 0);
> > +
> > + head = vq->next_avail_idx;
> > + avail_wrap_counter = vq->avail_wrap_counter;
> > +
> > + if (virtqueue_use_indirect(_vq, total_sg))
> > + desc = alloc_indirect_packed(_vq, total_sg, gfp);
> > + else {
> > + desc = NULL;
> > + WARN_ON_ONCE(total_sg > vq->vring_packed.num && !vq->indirect);
> > + }
>
>
> Apparently this attempts to treat indirect descriptors same as
> direct ones. This is how it is in the split ring, but not in
> the packed one. I think you want two separate functions, for
> direct and indirect.
Okay, I'll do that.
>
> > +
> > + if (desc) {
> > + /* Use a single buffer which doesn't continue */
> > + indirect = true;
> > + /* Set up rest to use this indirect table. */
> > + i = 0;
> > + descs_used = 1;
> > + } else {
> > + indirect = false;
> > + desc = vq->vring_packed.desc;
> > + i = head;
> > + descs_used = total_sg;
> > + }
> > +
> > + if (vq->vq.num_free < descs_used) {
> > + pr_debug("Can't add buf len %i - avail = %i\n",
> > + descs_used, vq->vq.num_free);
> > + /* FIXME: for historical reasons, we force a notify here if
> > + * there are outgoing parts to the buffer. Presumably the
> > + * host should service the ring ASAP. */
> > + if (out_sgs)
> > + vq->notify(&vq->vq);
> > + if (indirect)
> > + kfree(desc);
> > + END_USE(vq);
> > + return -ENOSPC;
> > + }
> > +
> > + id = vq->free_head;
> > + BUG_ON(id == vq->vring_packed.num);
> > +
> > + curr = id;
> > + for (n = 0; n < out_sgs + in_sgs; n++) {
> > + for (sg = sgs[n]; sg; sg = sg_next(sg)) {
> > + dma_addr_t addr = vring_map_one_sg(vq, sg, n < out_sgs ?
> > + DMA_TO_DEVICE : DMA_FROM_DEVICE);
> > + if (vring_mapping_error(vq, addr))
> > + goto unmap_release;
> > +
> > + flags = cpu_to_virtio16(_vq->vdev, VRING_DESC_F_NEXT |
> > + (n < out_sgs ? 0 : VRING_DESC_F_WRITE) |
> > + _VRING_DESC_F_AVAIL(vq->avail_wrap_counter) |
> > + _VRING_DESC_F_USED(!vq->avail_wrap_counter));
>
> Spec says:
> The VIRTQ_DESC_F_WRITE flags bit is the only valid flag for descriptors in the
> indirect table.
>
> All this logic isn't needed for indirect.
>
> Also, why re-calculate avail/used flags every time? They only change
> when you wrap around.
Will do that. Thanks.
>
>
> > + if (!indirect && i == head)
> > + head_flags = flags;
> > + else
> > + desc[i].flags = flags;
> > +
> > + desc[i].addr = cpu_to_virtio64(_vq->vdev, addr);
> > + desc[i].len = cpu_to_virtio32(_vq->vdev, sg->length);
> > + i++;
> > + if (!indirect) {
> > + if (vring_use_dma_api(_vq->vdev)) {
> > + vq->desc_state_packed[curr].addr = addr;
> > + vq->desc_state_packed[curr].len =
> > + sg->length;
> > + vq->desc_state_packed[curr].flags =
> > + virtio16_to_cpu(_vq->vdev,
> > + flags);
> > + }
> > + curr = vq->desc_state_packed[curr].next;
> > +
> > + if (i >= vq->vring_packed.num) {
> > + i = 0;
> > + vq->avail_wrap_counter ^= 1;
> > + }
> > + }
> > + }
> > + }
> > +
> > + prev = (i > 0 ? i : vq->vring_packed.num) - 1;
> > + desc[prev].id = cpu_to_virtio16(_vq->vdev, id);
>
> Is it easier to write this out in all descriptors, to avoid the need to
> calculate prev?
Yeah, I'll do that.
>
> > +
> > + /* Last one doesn't continue. */
> > + if (total_sg == 1)
> > + head_flags &= cpu_to_virtio16(_vq->vdev, ~VRING_DESC_F_NEXT);
> > + else
> > + desc[prev].flags &= cpu_to_virtio16(_vq->vdev,
> > + ~VRING_DESC_F_NEXT);
>
> Wouldn't it be easier to avoid setting VRING_DESC_F_NEXT
> in the first place?
> if (n != in_sgs - 1 && n != out_sgs - 1)
Will this affect the branch prediction?
>
> must be better than writing descriptor an extra time.
Not quite sure about this. I think this descriptor has just
been written, it should still be in the cache.
>
> > +
> > + if (indirect) {
> > + /* Now that the indirect table is filled in, map it. */
> > + dma_addr_t addr = vring_map_single(
> > + vq, desc, total_sg * sizeof(struct vring_packed_desc),
> > + DMA_TO_DEVICE);
> > + if (vring_mapping_error(vq, addr))
> > + goto unmap_release;
> > +
> > + head_flags = cpu_to_virtio16(_vq->vdev, VRING_DESC_F_INDIRECT |
> > + _VRING_DESC_F_AVAIL(avail_wrap_counter) |
> > + _VRING_DESC_F_USED(!avail_wrap_counter));
> > + vq->vring_packed.desc[head].addr = cpu_to_virtio64(_vq->vdev,
> > + addr);
> > + vq->vring_packed.desc[head].len = cpu_to_virtio32(_vq->vdev,
> > + total_sg * sizeof(struct vring_packed_desc));
> > + vq->vring_packed.desc[head].id = cpu_to_virtio16(_vq->vdev, id);
> > +
> > + if (vring_use_dma_api(_vq->vdev)) {
> > + vq->desc_state_packed[id].addr = addr;
> > + vq->desc_state_packed[id].len = total_sg *
> > + sizeof(struct vring_packed_desc);
> > + vq->desc_state_packed[id].flags =
> > + virtio16_to_cpu(_vq->vdev, head_flags);
> > + }
> > + }
> > +
> > + /* We're using some buffers from the free list. */
> > + vq->vq.num_free -= descs_used;
> > +
> > + /* Update free pointer */
> > + if (indirect) {
> > + n = head + 1;
> > + if (n >= vq->vring_packed.num) {
> > + n = 0;
> > + vq->avail_wrap_counter ^= 1;
> > + }
> > + vq->next_avail_idx = n;
> > + vq->free_head = vq->desc_state_packed[id].next;
> > + } else {
> > + vq->next_avail_idx = i;
> > + vq->free_head = curr;
> > + }
> > +
> > + /* Store token and indirect buffer state. */
> > + vq->desc_state_packed[id].num = descs_used;
> > + vq->desc_state_packed[id].data = data;
> > + if (indirect)
> > + vq->desc_state_packed[id].indir_desc = desc;
> > + else
> > + vq->desc_state_packed[id].indir_desc = ctx;
> > +
> > + /* A driver MUST NOT make the first descriptor in the list
> > + * available before all subsequent descriptors comprising
> > + * the list are made available. */
> > + virtio_wmb(vq->weak_barriers);
> > + vq->vring_packed.desc[head].flags = head_flags;
> > + vq->num_added += descs_used;
> > +
> > + pr_debug("Added buffer head %i to %p\n", head, vq);
> > + END_USE(vq);
> > +
> > + return 0;
> > +
> > +unmap_release:
> > + err_idx = i;
> > + i = head;
> > +
> > + for (n = 0; n < total_sg; n++) {
> > + if (i == err_idx)
> > + break;
> > + vring_unmap_desc_packed(vq, &desc[i]);
> > + i++;
> > + if (!indirect && i >= vq->vring_packed.num)
> > + i = 0;
> > + }
> > +
> > + vq->avail_wrap_counter = avail_wrap_counter;
> > +
> > + if (indirect)
> > + kfree(desc);
> > +
> > + END_USE(vq);
> > return -EIO;
> > }
> >
> > static bool virtqueue_kick_prepare_packed(struct virtqueue *_vq)
> > {
> > - return false;
> > + struct vring_virtqueue *vq = to_vvq(_vq);
> > + u16 flags;
> > + bool needs_kick;
> > + u32 snapshot;
> > +
> > + START_USE(vq);
> > + /* We need to expose the new flags value before checking notification
> > + * suppressions. */
> > + virtio_mb(vq->weak_barriers);
> > +
> > + snapshot = READ_ONCE(*(u32 *)vq->vring_packed.device);
> > + flags = virtio16_to_cpu(_vq->vdev, (__virtio16)(snapshot >> 16)) & 0x3;
>
> What are all these hard-coded things? Also either we do READ_ONCE
> everywhere or nowhere. Why is this place special? Any why read 32 bit
> if you only want the 16?
Yeah, READ_ONCE() and reading 32bits are not really needed in
this patch. But it's needed in the next patch. I thought it's
not wrong to do this, so I introduced them from the first place.
Just to double check: is the below code (apart from the
hard-coded value and virtio16) from the next patch OK?
"""
snapshot = READ_ONCE(*(u32 *)vq->vring_packed.device);
+ off_wrap = virtio16_to_cpu(_vq->vdev, (__virtio16)(snapshot & 0xffff));
flags = virtio16_to_cpu(_vq->vdev, (__virtio16)(snapshot >> 16)) & 0x3;
"""
>
> And doesn't sparse complain about cast to __virtio16?
I'll give it a try in the next version.
>
> > +
> > +#ifdef DEBUG
> > + if (vq->last_add_time_valid) {
> > + WARN_ON(ktime_to_ms(ktime_sub(ktime_get(),
> > + vq->last_add_time)) > 100);
> > + }
> > + vq->last_add_time_valid = false;
> > +#endif
> > +
> > + needs_kick = (flags != VRING_EVENT_F_DISABLE);
> > + END_USE(vq);
> > + return needs_kick;
> > +}
> > +
> > +static void detach_buf_packed(struct vring_virtqueue *vq,
> > + unsigned int id, void **ctx)
> > +{
> > + struct vring_desc_state_packed *state = NULL;
> > + struct vring_packed_desc *desc;
> > + unsigned int curr, i;
> > +
> > + /* Clear data ptr. */
> > + vq->desc_state_packed[id].data = NULL;
> > +
> > + curr = id;
> > + for (i = 0; i < vq->desc_state_packed[id].num; i++) {
> > + state = &vq->desc_state_packed[curr];
> > + vring_unmap_state_packed(vq, state);
> > + curr = state->next;
> > + }
> > +
> > + BUG_ON(state == NULL);
> > + vq->vq.num_free += vq->desc_state_packed[id].num;
> > + state->next = vq->free_head;
> > + vq->free_head = id;
> > +
> > + if (vq->indirect) {
> > + u32 len;
> > +
> > + /* Free the indirect table, if any, now that it's unmapped. */
> > + desc = vq->desc_state_packed[id].indir_desc;
> > + if (!desc)
> > + return;
> > +
> > + if (vring_use_dma_api(vq->vq.vdev)) {
> > + len = vq->desc_state_packed[id].len;
> > + for (i = 0; i < len / sizeof(struct vring_packed_desc);
> > + i++)
> > + vring_unmap_desc_packed(vq, &desc[i]);
> > + }
> > + kfree(desc);
> > + vq->desc_state_packed[id].indir_desc = NULL;
> > + } else if (ctx) {
> > + *ctx = vq->desc_state_packed[id].indir_desc;
> > + }
> > +}
> > +
> > +static inline bool is_used_desc_packed(const struct vring_virtqueue *vq,
> > + u16 idx, bool used_wrap_counter)
> > +{
> > + u16 flags;
> > + bool avail, used;
> > +
> > + flags = virtio16_to_cpu(vq->vq.vdev,
> > + vq->vring_packed.desc[idx].flags);
> > + avail = !!(flags & VRING_DESC_F_AVAIL);
> > + used = !!(flags & VRING_DESC_F_USED);
> > +
> > + return avail == used && used == used_wrap_counter;
>
> I think that you don't need to look at avail flag to detect a used
> descriptor. The reason device writes it is to avoid confusing
> *device* next time descriptor wraps.
Okay, I'll just check the used flag.
>
> > }
> >
> > static inline bool more_used_packed(const struct vring_virtqueue *vq)
> > {
> > - return false;
> > + return is_used_desc_packed(vq, vq->last_used_idx,
> > + vq->used_wrap_counter);
> > }
> >
> > static void *virtqueue_get_buf_ctx_packed(struct virtqueue *_vq,
> > unsigned int *len,
> > void **ctx)
> > {
> > - return NULL;
> > + struct vring_virtqueue *vq = to_vvq(_vq);
> > + u16 last_used, id;
> > + void *ret;
> > +
> > + START_USE(vq);
> > +
> > + if (unlikely(vq->broken)) {
> > + END_USE(vq);
> > + return NULL;
> > + }
> > +
> > + if (!more_used_packed(vq)) {
> > + pr_debug("No more buffers in queue\n");
> > + END_USE(vq);
> > + return NULL;
> > + }
> > +
> > + /* Only get used elements after they have been exposed by host. */
> > + virtio_rmb(vq->weak_barriers);
> > +
> > + last_used = vq->last_used_idx;
> > + id = virtio16_to_cpu(_vq->vdev, vq->vring_packed.desc[last_used].id);
> > + *len = virtio32_to_cpu(_vq->vdev, vq->vring_packed.desc[last_used].len);
> > +
> > + if (unlikely(id >= vq->vring_packed.num)) {
> > + BAD_RING(vq, "id %u out of range\n", id);
> > + return NULL;
> > + }
> > + if (unlikely(!vq->desc_state_packed[id].data)) {
> > + BAD_RING(vq, "id %u is not a head!\n", id);
> > + return NULL;
> > + }
> > +
> > + vq->last_used_idx += vq->desc_state_packed[id].num;
> > + if (vq->last_used_idx >= vq->vring_packed.num) {
> > + vq->last_used_idx -= vq->vring_packed.num;
> > + vq->used_wrap_counter ^= 1;
> > + }
> > +
> > + /* detach_buf_packed clears data, so grab it now. */
> > + ret = vq->desc_state_packed[id].data;
> > + detach_buf_packed(vq, id, ctx);
> > +
> > +#ifdef DEBUG
> > + vq->last_add_time_valid = false;
> > +#endif
> > +
> > + END_USE(vq);
> > + return ret;
> > }
> >
> > static void virtqueue_disable_cb_packed(struct virtqueue *_vq)
> > {
> > + struct vring_virtqueue *vq = to_vvq(_vq);
> > +
> > + if (vq->event_flags_shadow != VRING_EVENT_F_DISABLE) {
> > + vq->event_flags_shadow = VRING_EVENT_F_DISABLE;
> > + vq->vring_packed.driver->flags = cpu_to_virtio16(_vq->vdev,
> > + vq->event_flags_shadow);
> > + }
> > }
> >
> > static unsigned virtqueue_enable_cb_prepare_packed(struct virtqueue *_vq)
> > {
> > - return 0;
> > + struct vring_virtqueue *vq = to_vvq(_vq);
> > +
> > + START_USE(vq);
> > +
> > + /* We optimistically turn back on interrupts, then check if there was
> > + * more to do. */
> > +
> > + if (vq->event_flags_shadow == VRING_EVENT_F_DISABLE) {
> > + vq->event_flags_shadow = VRING_EVENT_F_ENABLE;
> > + vq->vring_packed.driver->flags = cpu_to_virtio16(_vq->vdev,
> > + vq->event_flags_shadow);
> > + }
> > +
> > + END_USE(vq);
> > + return vq->last_used_idx | ((u16)vq->used_wrap_counter << 15);
> > }
> >
> > -static bool virtqueue_poll_packed(struct virtqueue *_vq, unsigned last_used_idx)
> > +static bool virtqueue_poll_packed(struct virtqueue *_vq, unsigned off_wrap)
> > {
> > - return false;
> > + struct vring_virtqueue *vq = to_vvq(_vq);
> > + bool wrap_counter;
> > + u16 used_idx;
> > +
> > + wrap_counter = off_wrap >> 15;
> > + used_idx = off_wrap & ~(1 << 15);
> > +
> > + return is_used_desc_packed(vq, used_idx, wrap_counter);
>
> These >> 15 << 15 all over the place duplicate info.
> Pls put 15 in the header.
Sure.
>
> Also can you maintain the counters properly shifted?
> Then just use them.
Then, we may need to maintain both of the shifted wrapper
counters and un-shifted wrapper counters at the same time.
>
>
> > }
> >
> > static bool virtqueue_enable_cb_delayed_packed(struct virtqueue *_vq)
> > {
> > - return false;
> > + struct vring_virtqueue *vq = to_vvq(_vq);
> > +
> > + START_USE(vq);
> > +
> > + /* We optimistically turn back on interrupts, then check if there was
> > + * more to do. */
> > +
> > + if (vq->event_flags_shadow == VRING_EVENT_F_DISABLE) {
> > + vq->event_flags_shadow = VRING_EVENT_F_ENABLE;
> > + vq->vring_packed.driver->flags = cpu_to_virtio16(_vq->vdev,
> > + vq->event_flags_shadow);
> > + /* We need to enable interrupts first before re-checking
> > + * for more used buffers. */
> > + virtio_mb(vq->weak_barriers);
> > + }
> > +
> > + if (more_used_packed(vq)) {
> > + END_USE(vq);
> > + return false;
> > + }
> > +
> > + END_USE(vq);
> > + return true;
> > }
> >
> > static void *virtqueue_detach_unused_buf_packed(struct virtqueue *_vq)
> > {
> > + struct vring_virtqueue *vq = to_vvq(_vq);
> > + unsigned int i;
> > + void *buf;
> > +
> > + START_USE(vq);
> > +
> > + for (i = 0; i < vq->vring_packed.num; i++) {
> > + if (!vq->desc_state_packed[i].data)
> > + continue;
> > + /* detach_buf clears data, so grab it now. */
> > + buf = vq->desc_state_packed[i].data;
> > + detach_buf_packed(vq, i, NULL);
> > + END_USE(vq);
> > + return buf;
> > + }
> > + /* That should have freed everything. */
> > + BUG_ON(vq->vq.num_free != vq->vring_packed.num);
> > +
> > + END_USE(vq);
> > return NULL;
> > }
> >
> > @@ -1083,6 +1559,9 @@ bool virtqueue_poll(struct virtqueue *_vq, unsigned last_used_idx)
> > {
> > struct vring_virtqueue *vq = to_vvq(_vq);
> >
> > + /* We need to enable interrupts first before re-checking
> > + * for more used buffers. */
> > + virtio_mb(vq->weak_barriers);
> > return vq->packed ? virtqueue_poll_packed(_vq, last_used_idx) :
> > virtqueue_poll_split(_vq, last_used_idx);
> > }
>
> Possible optimization for when dma API is in use:
Got it. Will give it a try!
Best regards,
Tiwei Bie
>
> --->
>
> dma: detecting nop unmap
>
> drivers need to maintain the dma address for unmap purposes,
> but these cycles are wasted when unmap callback is not
> defined. Add an API for drivers to check that and avoid
> unmap completely. Debug builds still have unmap.
>
> Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
>
> ----
>
> diff --git a/include/linux/dma-debug.h b/include/linux/dma-debug.h
> index a785f2507159..38b2c27c8449 100644
> --- a/include/linux/dma-debug.h
> +++ b/include/linux/dma-debug.h
> @@ -42,6 +42,11 @@ extern void debug_dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
> extern void debug_dma_unmap_page(struct device *dev, dma_addr_t addr,
> size_t size, int direction, bool map_single);
>
> +static inline bool has_debug_dma_unmap(struct device *dev)
> +{
> + return true;
> +}
> +
> extern void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
> int nents, int mapped_ents, int direction);
>
> @@ -121,6 +126,11 @@ static inline void debug_dma_unmap_page(struct device *dev, dma_addr_t addr,
> {
> }
>
> +static inline bool has_debug_dma_unmap(struct device *dev)
> +{
> + return false;
> +}
> +
> static inline void debug_dma_map_sg(struct device *dev, struct scatterlist *sg,
> int nents, int mapped_ents, int direction)
> {
> diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
> index 1db6a6b46d0d..656f3e518166 100644
> --- a/include/linux/dma-mapping.h
> +++ b/include/linux/dma-mapping.h
> @@ -241,6 +241,14 @@ static inline dma_addr_t dma_map_single_attrs(struct device *dev, void *ptr,
> return addr;
> }
>
> +static inline bool has_dma_unmap(struct device *dev)
> +{
> + const struct dma_map_ops *ops = get_dma_ops(dev);
> +
> + return ops->unmap_page || ops->unmap_sg || ops->unmap_resource ||
> + has_dma_unmap(dev);
> +}
> +
> static inline void dma_unmap_single_attrs(struct device *dev, dma_addr_t addr,
> size_t size,
> enum dma_data_direction dir,