Re: [PATCH v5 01/10] dt-bindings: fsi: Add P9 OCC device documentation

[Rob Herring]

On Thu, Aug 30, 2018 at 04:32:32PM -0500, Eddie James wrote:
> Document the bindings for the FSI-attached POWER9 On-Chip Controller.
> 
> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> 
> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> new file mode 100644
> index 0000000..46372f6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
> @@ -0,0 +1,15 @@
> +Device-tree bindings for FSI-attached POWER9 On-Chip Controller (OCC)
> +---------------------------------------------------------------------
> +
> +This is the binding for the P9 On-Chip Controller accessed over FSI from a
> +service processor. See fsi.txt for details on bindings for FSI slave and CFAM
> +nodes.
> +
> +Required properties:
> + - compatible = "ibm,p9-occ"
> +
> +Examples:
> +
> +    occ {

FSI slave devices are supposed to have an address according to the 
binding doc.

> +        compatible = "ibm,p9-occ";
> +    };
> -- 
> 1.8.3.1
>