[PATCH v2 0/3] Add Amlogic video decoder driver

[Maxime Jourdan]

Hi everyone,

This patch series adds support for the Amlogic video decoder,
as well as the corresponding dt bindings for GXBB/GXL/GXM chips.

It features decoding for the following formats:
- MPEG 1
- MPEG 2

The following formats will be added in future patches:
- MJPEG
- MPEG 4 (incl. Xvid, H.263)
- H.264
- HEVC (incl. 10-bit)

The following formats' development has still not started, but they are
supported by the hardware:
- VC1
- VP9

The code was made in such a way to allow easy inclusion of those formats
in the future.

The decoder is single instance.

Files:
 - vdec.c handles the V4L2 M2M logic
 - esparser.c manages the hardware bitstream parser
 - vdec_helpers.c provides helpers to DONE the dst buffers as well as
 various common code used by the codecs
 - vdec_1.c manages the VDEC_1 block of the vdec IP
 - codec_mpeg12.c enables decoding for MPEG 1/2.
 - vdec_platform.c links codec units with vdec units
 (e.g vdec_1 with codec_mpeg12) and lists all the available
 src/dst formats and requirements (max width/height, etc.),
 per compatible chip.

Firmwares are necessary to run the vdec. They can currently be found at:
https://github.com/chewitt/meson-firmware

It was tested primarily with ffmpeg's v4l2-m2m implementation. For instance:
$ ffmpeg -c:v mpeg2_v4l2m2m -i sample_mpeg2.mkv -f null -

Note: This patch series depends on
"[PATCH v3 0/3] soc: amlogic: add meson-canvas"
https://patchwork.kernel.org/cover/10573763/

The v4l2-compliance results are available below the patch diff.

Changes since v1 [0]:
 - use named interrupts in the bindings
 - rewrite description in the bindings doc
 - don't include the dts changes in the patch series
 - fill the vb2 queues locks
 - fill the video_device lock
 - use helpers for wait_prepare and wait_finish vb2_ops
 - remove unnecessary usleep in between esparser writes.
 Extensive testing of every codec on GXBB/GXL didn't reveal
 any fails without it, so just remove it.
 - compile v4l2_compliance inside the git repo
 - Check for plane number/plane size to pass the latest v4l2-compliance test
 - Moved the single instance check (returning -EBUSY) to start/stop streaming
 The check was previously in queue_setup but there was no great location to
 clear it except for .close().
 - Slight rework of the way CAPTURE frames are timestamped for better accuracy
 - Implement PAR reporting via VIDIOC_CROPCAP

[0] https://patchwork.kernel.org/cover/10583391/

Maxime Jourdan (3):
  dt-bindings: media: add Amlogic Video Decoder Bindings
  media: meson: add v4l2 m2m video decoder driver
  MAINTAINERS: Add meson video decoder

 .../bindings/media/amlogic,vdec.txt           |   71 ++
 MAINTAINERS                                   |    8 +
 drivers/media/platform/Kconfig                |   10 +
 drivers/media/platform/meson/Makefile         |    1 +
 drivers/media/platform/meson/vdec/Makefile    |    8 +
 .../media/platform/meson/vdec/codec_mpeg12.c  |  200 ++++
 .../media/platform/meson/vdec/codec_mpeg12.h  |   14 +
 drivers/media/platform/meson/vdec/dos_regs.h  |   98 ++
 drivers/media/platform/meson/vdec/esparser.c  |  366 ++++++
 drivers/media/platform/meson/vdec/esparser.h  |   32 +
 drivers/media/platform/meson/vdec/vdec.c      | 1013 +++++++++++++++++
 drivers/media/platform/meson/vdec/vdec.h      |  247 ++++
 drivers/media/platform/meson/vdec/vdec_1.c    |  235 ++++
 drivers/media/platform/meson/vdec/vdec_1.h    |   14 +
 .../media/platform/meson/vdec/vdec_helpers.c  |  437 +++++++
 .../media/platform/meson/vdec/vdec_helpers.h  |   48 +
 .../media/platform/meson/vdec/vdec_platform.c |  101 ++
 .../media/platform/meson/vdec/vdec_platform.h |   30 +
 18 files changed, 2933 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/amlogic,vdec.txt
 create mode 100644 drivers/media/platform/meson/vdec/Makefile
 create mode 100644 drivers/media/platform/meson/vdec/codec_mpeg12.c
 create mode 100644 drivers/media/platform/meson/vdec/codec_mpeg12.h
 create mode 100644 drivers/media/platform/meson/vdec/dos_regs.h
 create mode 100644 drivers/media/platform/meson/vdec/esparser.c
 create mode 100644 drivers/media/platform/meson/vdec/esparser.h
 create mode 100644 drivers/media/platform/meson/vdec/vdec.c
 create mode 100644 drivers/media/platform/meson/vdec/vdec.h
 create mode 100644 drivers/media/platform/meson/vdec/vdec_1.c
 create mode 100644 drivers/media/platform/meson/vdec/vdec_1.h
 create mode 100644 drivers/media/platform/meson/vdec/vdec_helpers.c
 create mode 100644 drivers/media/platform/meson/vdec/vdec_helpers.h
 create mode 100644 drivers/media/platform/meson/vdec/vdec_platform.c
 create mode 100644 drivers/media/platform/meson/vdec/vdec_platform.h

root@libretech-cc:~# v4l2-compliance -d /dev/video0 
v4l2-compliance SHA: d26e4941419b05fcb2b6708ee32aef367c2ec4af, 64 bits

Compliance test for device /dev/video0:

Driver Info:
	Driver name      : meson-vdec
	Card type        : Amlogic Video Decoder
	Bus info         : platform:meson-vdec
	Driver version   : 4.19.0
	Capabilities     : 0x84204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps      : 0x04204000
		Video Memory-to-Memory Multiplanar
		Streaming
		Extended Pix Format

Required ioctls:
	test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
	test second /dev/video0 open: OK
	test VIDIOC_QUERYCAP: OK
	test VIDIOC_G/S_PRIORITY: OK
	test for unlimited opens: OK

Debug ioctls:
	test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
	test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
	test VIDIOC_ENUMAUDIO: OK (Not Supported)
	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDIO: OK (Not Supported)
	Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
	Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
	test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
	test VIDIOC_QUERYCTRL: OK (Not Supported)
	test VIDIOC_G/S_CTRL: OK (Not Supported)
	test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
	Standard Controls: 0 Private Controls: 0

Format ioctls:
	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
	test VIDIOC_G/S_PARM: OK (Not Supported)
	test VIDIOC_G_FBUF: OK (Not Supported)
	test VIDIOC_G_FMT: OK
	test VIDIOC_TRY_FMT: OK
	test VIDIOC_S_FMT: OK
	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
	test Cropping: OK (Not Supported)
	test Composing: OK (Not Supported)
	test Scaling: OK

Codec ioctls:
	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
	test VIDIOC_(TRY_)DECODER_CMD: OK

Buffer ioctls:
	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
	test VIDIOC_EXPBUF: OK

Total: 43, Succeeded: 43, Failed: 0, Warnings: 0

-- 
2.18.0