Re: [PATCH 08/27] clk: sunxi-ng: Add support for H6 DE3 clocks

From: Chen-Yu Tsai
Date: Wed Sep 12 2018 - 08:20:30 EST

Next message: Cheng-Yi Chiang: "[PATCH 2/2] ASoC: max98927: Add reset-gpio support"
Previous message: Cheng-Yi Chiang: "[PATCH 1/2] ASoC: max9892x: Add documentation for reset-gpio support"
Next in thread: Jernej Åkrabec: "Re: [PATCH 08/27] clk: sunxi-ng: Add support for H6 DE3 clocks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Sep 5, 2018 at 1:46 AM Jernej Åkrabec <jernej.skrabec@xxxxxxxx> wrote:
>
> Dne torek, 04. september 2018 ob 11:04:21 CEST je Chen-Yu Tsai napisal(a):
> > On Sun, Sep 2, 2018 at 3:27 PM Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> wrote:
> > > Support for mixer0, mixer1, writeback and rotation units is added.
> > >
> > > Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> > > ---
> > >
> > > drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 65 ++++++++++++++++++++++++++++
> > > drivers/clk/sunxi-ng/ccu-sun8i-de2.h | 1 +
> > > 2 files changed, 66 insertions(+)
> > >
> > > diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> > > b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c index bae5ee67a797..4535c1c27d27
> > > 100644
> > > --- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> > > +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
> > > @@ -31,6 +31,8 @@ static SUNXI_CCU_GATE(bus_mixer1_clk, "bus-mixer1",
> > > "bus-de",>
> > > 0x04, BIT(1), 0);
> > >
> > > static SUNXI_CCU_GATE(bus_wb_clk, "bus-wb", "bus-de",
> > >
> > > 0x04, BIT(2), 0);
> > >
> > > +static SUNXI_CCU_GATE(bus_rot_clk, "bus-rot", "bus-de",
> > > + 0x04, BIT(3), 0);
> > >
> > > static SUNXI_CCU_GATE(mixer0_clk, "mixer0", "mixer0-div",
> > >
> > > 0x00, BIT(0), CLK_SET_RATE_PARENT);
> > >
> > > @@ -38,6 +40,8 @@ static SUNXI_CCU_GATE(mixer1_clk, "mixer1",
> > > "mixer1-div",>
> > > 0x00, BIT(1), CLK_SET_RATE_PARENT);
> > >
> > > static SUNXI_CCU_GATE(wb_clk, "wb", "wb-div",
> > >
> > > 0x00, BIT(2), CLK_SET_RATE_PARENT);
> > >
> > > +static SUNXI_CCU_GATE(rot_clk, "rot", "rot-div",
> > > + 0x00, BIT(3), CLK_SET_RATE_PARENT);
> > >
> > > static SUNXI_CCU_M(mixer0_div_clk, "mixer0-div", "de", 0x0c, 0, 4,
> > >
> > > CLK_SET_RATE_PARENT);
> > >
> > > @@ -45,6 +49,8 @@ static SUNXI_CCU_M(mixer1_div_clk, "mixer1-div", "de",
> > > 0x0c, 4, 4,>
> > > CLK_SET_RATE_PARENT);
> > >
> > > static SUNXI_CCU_M(wb_div_clk, "wb-div", "de", 0x0c, 8, 4,
> > >
> > > CLK_SET_RATE_PARENT);
> > >
> > > +static SUNXI_CCU_M(rot_div_clk, "rot-div", "de", 0x0c, 0x0c, 4,
> > > + CLK_SET_RATE_PARENT);
> > >
> > > static SUNXI_CCU_M(mixer0_div_a83_clk, "mixer0-div", "pll-de", 0x0c, 0,
> > > 4,
> > >
> > > CLK_SET_RATE_PARENT);
> > >
> > > @@ -53,6 +59,24 @@ static SUNXI_CCU_M(mixer1_div_a83_clk, "mixer1-div",
> > > "pll-de", 0x0c, 4, 4,>
> > > static SUNXI_CCU_M(wb_div_a83_clk, "wb-div", "pll-de", 0x0c, 8, 4,
> > >
> > > CLK_SET_RATE_PARENT);
> > >
> > > +static struct ccu_common *sun50i_h6_de3_clks[] = {
> > > + &mixer0_clk.common,
> > > + &mixer1_clk.common,
> > > + &wb_clk.common,
> > > +
> > > + &bus_mixer0_clk.common,
> > > + &bus_mixer1_clk.common,
> > > + &bus_wb_clk.common,
> > > +
> > > + &mixer0_div_clk.common,
> > > + &mixer1_div_clk.common,
> > > + &wb_div_clk.common,
> > > +
> > > + &bus_rot_clk.common,
> > > + &rot_clk.common,
> > > + &rot_div_clk.common,
> > > +};
> > > +
> > >
> > > static struct ccu_common *sun8i_a83t_de2_clks[] = {
> > >
> > > &mixer0_clk.common,
> > > &mixer1_clk.common,
> > >
> > > @@ -92,6 +116,26 @@ static struct ccu_common *sun8i_v3s_de2_clks[] = {
> > >
> > > &wb_div_clk.common,
> > >
> > > };
> > >
> > > +static struct clk_hw_onecell_data sun50i_h6_de3_hw_clks = {
> > > + .hws = {
> > > + [CLK_MIXER0] = &mixer0_clk.common.hw,
> > > + [CLK_MIXER1] = &mixer1_clk.common.hw,
> > > + [CLK_WB] = &wb_clk.common.hw,
> > > + [CLK_ROT] = &rot_clk.common.hw,
> > > +
> > > + [CLK_BUS_MIXER0] = &bus_mixer0_clk.common.hw,
> > > + [CLK_BUS_MIXER1] = &bus_mixer1_clk.common.hw,
> > > + [CLK_BUS_WB] = &bus_wb_clk.common.hw,
> > > + [CLK_BUS_ROT] = &bus_rot_clk.common.hw,
> > > +
> > > + [CLK_MIXER0_DIV] = &mixer0_div_clk.common.hw,
> > > + [CLK_MIXER1_DIV] = &mixer1_div_clk.common.hw,
> > > + [CLK_WB_DIV] = &wb_div_clk.common.hw,
> > > + [CLK_ROT_DIV] = &rot_div_clk.common.hw,
> > > + },
> > > + .num = 12,
> >
> > It's best not to openly code these. It is error prone, like having
> > an index beyond .num, which then never gets registered.
> >
> > Instead, please update CLK_NUMBERS and use that instead. sunxi_ccu_probe()
> > can handle holes in .hws.
>
> I'm not sure this will work. All newly introduced indices are at the end, so
> other arrays will still have same length (hole at the end). You will just
> claim that arrays are larger than they really are, which means bad things.
>
> But I take any other suggestion. I really can't think of better solution.

Then maybe have macros for both cases instead?
CLK_NUMBER_WITH_ROT / CLK_NUMBER_WITHOUT_ROT?

ChenYu

> Best regards,
> Jernej
>
> >
> > On the other hand, it can't handle holes in the ccu_reset_map. Hope we
> > never have to deal with such an instance.
> >
> > ChenYu
> >
> > > +};
> > > +
> > >
> > > static struct clk_hw_onecell_data sun8i_a83t_de2_hw_clks = {
> > >
> > > .hws = {
> > >
> > > [CLK_MIXER0] = &mixer0_clk.common.hw,
> > >
> > > @@ -156,6 +200,13 @@ static struct ccu_reset_map sun50i_a64_de2_resets[] =
> > > {>
> > > [RST_WB] = { 0x08, BIT(2) },
> > >
> > > };
> > >
> > > +static struct ccu_reset_map sun50i_h6_de3_resets[] = {
> > > + [RST_MIXER0] = { 0x08, BIT(0) },
> > > + [RST_MIXER1] = { 0x08, BIT(1) },
> > > + [RST_WB] = { 0x08, BIT(2) },
> > > + [RST_ROT] = { 0x08, BIT(3) },
> > > +};
> > > +
> > >
> > > static const struct sunxi_ccu_desc sun8i_a83t_de2_clk_desc = {
> > >
> > > .ccu_clks = sun8i_a83t_de2_clks,
> > > .num_ccu_clks = ARRAY_SIZE(sun8i_a83t_de2_clks),
> > >
> > > @@ -186,6 +237,16 @@ static const struct sunxi_ccu_desc
> > > sun50i_a64_de2_clk_desc = {>
> > > .num_resets = ARRAY_SIZE(sun50i_a64_de2_resets),
> > >
> > > };
> > >
> > > +static const struct sunxi_ccu_desc sun50i_h6_de3_clk_desc = {
> > > + .ccu_clks = sun50i_h6_de3_clks,
> > > + .num_ccu_clks = ARRAY_SIZE(sun50i_h6_de3_clks),
> > > +
> > > + .hw_clks = &sun50i_h6_de3_hw_clks,
> > > +
> > > + .resets = sun50i_h6_de3_resets,
> > > + .num_resets = ARRAY_SIZE(sun50i_h6_de3_resets),
> > > +};
> > > +
> > >
> > > static const struct sunxi_ccu_desc sun8i_v3s_de2_clk_desc = {
> > >
> > > .ccu_clks = sun8i_v3s_de2_clks,
> > > .num_ccu_clks = ARRAY_SIZE(sun8i_v3s_de2_clks),
> > >
> > > @@ -296,6 +357,10 @@ static const struct of_device_id sunxi_de2_clk_ids[]
> > > = {>
> > > .compatible = "allwinner,sun50i-h5-de2-clk",
> > > .data = &sun50i_a64_de2_clk_desc,
> > >
> > > },
> > >
> > > + {
> > > + .compatible = "allwinner,sun50i-h6-de3-clk",
> > > + .data = &sun50i_h6_de3_clk_desc,
> > > + },
> > >
> > > { }
> > >
> > > };
> > >
> > > diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
> > > b/drivers/clk/sunxi-ng/ccu-sun8i-de2.h index 530c006e0ae9..27bd88539f42
> > > 100644
> > > --- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
> > > +++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.h
> > > @@ -22,6 +22,7 @@
> > >
> > > #define CLK_MIXER0_DIV 3
> > > #define CLK_MIXER1_DIV 4
> > > #define CLK_WB_DIV 5
> > >
> > > +#define CLK_ROT_DIV 11
> > >
> > > #define CLK_NUMBER (CLK_WB + 1)
> > >
> > > --
> > > 2.18.0
>
>
>
>

Next message: Cheng-Yi Chiang: "[PATCH 2/2] ASoC: max98927: Add reset-gpio support"
Previous message: Cheng-Yi Chiang: "[PATCH 1/2] ASoC: max9892x: Add documentation for reset-gpio support"
Next in thread: Jernej Åkrabec: "Re: [PATCH 08/27] clk: sunxi-ng: Add support for H6 DE3 clocks"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]