[PATCH 27/50] opticon: switch to ->get_serial()

[Al Viro]

From: Al Viro <viro@xxxxxxxxxxxxxxxxxx>

Signed-off-by: Al Viro <viro@xxxxxxxxxxxxxxxxxx>
---
 drivers/usb/serial/opticon.c | 43 ++++++++++++-------------------------------
 1 file changed, 12 insertions(+), 31 deletions(-)

diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index caa0746326fd..cb7aac9cd9e7 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -328,42 +328,23 @@ static int opticon_tiocmset(struct tty_struct *tty,
 	return 0;
 }
 
-static int get_serial_info(struct usb_serial_port *port,
-			   struct serial_struct __user *serial)
+static int get_serial_info(struct tty_struct *tty,
+			   struct serial_struct *ss)
 {
-	struct serial_struct tmp;
-
-	memset(&tmp, 0x00, sizeof(tmp));
+	struct usb_serial_port *port = tty->driver_data;
 
 	/* fake emulate a 16550 uart to make userspace code happy */
-	tmp.type		= PORT_16550A;
-	tmp.line		= port->minor;
-	tmp.port		= 0;
-	tmp.irq			= 0;
-	tmp.xmit_fifo_size	= 1024;
-	tmp.baud_base		= 9600;
-	tmp.close_delay		= 5*HZ;
-	tmp.closing_wait	= 30*HZ;
-
-	if (copy_to_user(serial, &tmp, sizeof(*serial)))
-		return -EFAULT;
+	ss->type		= PORT_16550A;
+	ss->line		= port->minor;
+	ss->port		= 0;
+	ss->irq			= 0;
+	ss->xmit_fifo_size	= 1024;
+	ss->baud_base		= 9600;
+	ss->close_delay		= 5*HZ;
+	ss->closing_wait	= 30*HZ;
 	return 0;
 }
 
-static int opticon_ioctl(struct tty_struct *tty,
-			 unsigned int cmd, unsigned long arg)
-{
-	struct usb_serial_port *port = tty->driver_data;
-
-	switch (cmd) {
-	case TIOCGSERIAL:
-		return get_serial_info(port,
-				       (struct serial_struct __user *)arg);
-	}
-
-	return -ENOIOCTLCMD;
-}
-
 static int opticon_port_probe(struct usb_serial_port *port)
 {
 	struct opticon_private *priv;
@@ -404,7 +385,7 @@ static struct usb_serial_driver opticon_device = {
 	.write_room = 		opticon_write_room,
 	.throttle =		usb_serial_generic_throttle,
 	.unthrottle =		usb_serial_generic_unthrottle,
-	.ioctl =		opticon_ioctl,
+	.get_serial =		get_serial_info,
 	.tiocmget =		opticon_tiocmget,
 	.tiocmset =		opticon_tiocmset,
 	.process_read_urb =	opticon_process_read_urb,
-- 
2.11.0