[RFC][PATCH 11/11] arch/tlb: Clean up simple architectures
From: Peter Zijlstra
Date: Thu Sep 13 2018 - 05:29:58 EST
There are generally two cases:
1) either the platform has an efficient flush_tlb_range() and
asm-generic/tlb.h doesn't need any overrides at all.
2) or an architecture lacks an efficient flush_tlb_range() and
we override tlb_end_vma() and tlb_flush().
Convert all 'simple' architectures to one of these two forms.
alpha: has no range invalidate -> 2
arc: already used flush_tlb_range() -> 1
c6x: has no range invalidate -> 2
h8300: has no mmu
hexagon: has an efficient flush_tlb_range() -> 1
(flush_tlb_mm() is in fact a full range invalidate,
so no need to shoot down everything)
m68k: has inefficient flush_tlb_range() -> 2
microblaze: has no flush_tlb_range() -> 2
mips: has efficient flush_tlb_range() -> 1
(even though it currently seems to use flush_tlb_mm())
nds32: already uses flush_tlb_range() -> 1
nios2: has inefficient flush_tlb_range() -> 2
(no limit on range iteration)
openrisc: has inefficient flush_tlb_range() -> 2
(no limit on range iteration)
parisc: already uses flush_tlb_range() -> 1
sparc32: already uses flush_tlb_range() -> 1
unicore32: has inefficient flush_tlb_range() -> 2
(no limit on range iteration)
xtensa: has efficient flush_tlb_range() -> 1
Cc: Will Deacon <will.deacon@xxxxxxx>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@xxxxxxxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Nick Piggin <npiggin@xxxxxxxxx>
Signed-off-by: Peter Zijlstra (Intel) <peterz@xxxxxxxxxxxxx>
---
arch/alpha/include/asm/tlb.h | 2 --
arch/arc/include/asm/tlb.h | 23 -----------------------
arch/c6x/include/asm/tlb.h | 1 +
arch/h8300/include/asm/tlb.h | 2 --
arch/hexagon/include/asm/tlb.h | 12 ------------
arch/m68k/include/asm/tlb.h | 1 -
arch/microblaze/include/asm/tlb.h | 4 +---
arch/mips/include/asm/tlb.h | 8 --------
arch/nds32/include/asm/tlb.h | 10 ----------
arch/nios2/include/asm/tlb.h | 8 +++++---
arch/openrisc/include/asm/tlb.h | 6 ++++--
arch/parisc/include/asm/tlb.h | 13 -------------
arch/powerpc/include/asm/tlb.h | 1 -
arch/sparc/include/asm/tlb_32.h | 13 -------------
arch/unicore32/include/asm/tlb.h | 10 ++++++----
arch/xtensa/include/asm/tlb.h | 17 -----------------
16 files changed, 17 insertions(+), 114 deletions(-)
--- a/arch/alpha/include/asm/tlb.h
+++ b/arch/alpha/include/asm/tlb.h
@@ -4,8 +4,6 @@
#define tlb_start_vma(tlb, vma) do { } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, pte, addr) do { } while (0)
-
#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#include <asm-generic/tlb.h>
--- a/arch/arc/include/asm/tlb.h
+++ b/arch/arc/include/asm/tlb.h
@@ -9,29 +9,6 @@
#ifndef _ASM_ARC_TLB_H
#define _ASM_ARC_TLB_H
-#define tlb_flush(tlb) \
-do { \
- if (tlb->fullmm) \
- flush_tlb_mm((tlb)->mm); \
-} while (0)
-
-/*
- * This pair is called at time of munmap/exit to flush cache and TLB entries
- * for mappings being torn down.
- * 1) cache-flush part -implemented via tlb_start_vma( ) for VIPT aliasing D$
- * 2) tlb-flush part - implemted via tlb_end_vma( ) flushes the TLB range
- *
- * Note, read http://lkml.org/lkml/2004/1/15/6
- */
-
-#define tlb_end_vma(tlb, vma) \
-do { \
- if (!tlb->fullmm) \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
-} while (0)
-
-#define __tlb_remove_tlb_entry(tlb, ptep, address)
-
#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
--- a/arch/c6x/include/asm/tlb.h
+++ b/arch/c6x/include/asm/tlb.h
@@ -2,6 +2,7 @@
#ifndef _ASM_C6X_TLB_H
#define _ASM_C6X_TLB_H
+#define tlb_end_vma(tlb,vma) do { } while (0)
#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#include <asm-generic/tlb.h>
--- a/arch/h8300/include/asm/tlb.h
+++ b/arch/h8300/include/asm/tlb.h
@@ -2,8 +2,6 @@
#ifndef __H8300_TLB_H__
#define __H8300_TLB_H__
-#define tlb_flush(tlb) do { } while (0)
-
#include <asm-generic/tlb.h>
#endif
--- a/arch/hexagon/include/asm/tlb.h
+++ b/arch/hexagon/include/asm/tlb.h
@@ -22,18 +22,6 @@
#include <linux/pagemap.h>
#include <asm/tlbflush.h>
-/*
- * We don't need any special per-pte or per-vma handling...
- */
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it fills up
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <asm-generic/tlb.h>
#endif
--- a/arch/m68k/include/asm/tlb.h
+++ b/arch/m68k/include/asm/tlb.h
@@ -8,7 +8,6 @@
*/
#define tlb_start_vma(tlb, vma) do { } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
/*
* .. because we flush the whole mm when it
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -11,14 +11,12 @@
#ifndef _ASM_MICROBLAZE_TLB_H
#define _ASM_MICROBLAZE_TLB_H
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <linux/pagemap.h>
#ifdef CONFIG_MMU
#define tlb_start_vma(tlb, vma) do { } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#endif
#include <asm-generic/tlb.h>
--- a/arch/mips/include/asm/tlb.h
+++ b/arch/mips/include/asm/tlb.h
@@ -5,14 +5,6 @@
#include <asm/cpu-features.h>
#include <asm/mipsregs.h>
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it fills up.
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#define _UNIQUE_ENTRYHI(base, idx) \
(((base) + ((idx) << (PAGE_SHIFT + 1))) | \
(cpu_has_tlbinv ? MIPS_ENTRYHI_EHINV : 0))
--- a/arch/nds32/include/asm/tlb.h
+++ b/arch/nds32/include/asm/tlb.h
@@ -4,16 +4,6 @@
#ifndef __ASMNDS32_TLB_H
#define __ASMNDS32_TLB_H
-#define tlb_end_vma(tlb,vma) \
- do { \
- if(!tlb->fullmm) \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
- } while (0)
-
-#define __tlb_remove_tlb_entry(tlb, pte, addr) do { } while (0)
-
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <asm-generic/tlb.h>
#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte)
--- a/arch/nios2/include/asm/tlb.h
+++ b/arch/nios2/include/asm/tlb.h
@@ -11,12 +11,14 @@
#ifndef _ASM_NIOS2_TLB_H
#define _ASM_NIOS2_TLB_H
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
extern void set_mmu_pid(unsigned long pid);
+/*
+ * NIOS32 does have flush_tlb_range(), but it lacks a limit and fallback to
+ * full mm invalidation. So use flush_tlb_mm() for everything.
+ */
#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
--- a/arch/openrisc/include/asm/tlb.h
+++ b/arch/openrisc/include/asm/tlb.h
@@ -22,12 +22,14 @@
/*
* or32 doesn't need any special per-pte or
* per-vma handling..
+ *
+ * OpenRISC doesn't have an efficient flush_tlb_range() so use flush_tlb_mm()
+ * for everything.
*/
#define tlb_start_vma(tlb, vma) do { } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
--- a/arch/parisc/include/asm/tlb.h
+++ b/arch/parisc/include/asm/tlb.h
@@ -2,19 +2,6 @@
#ifndef _PARISC_TLB_H
#define _PARISC_TLB_H
-#define tlb_flush(tlb) \
-do { if ((tlb)->fullmm) \
- flush_tlb_mm((tlb)->mm);\
-} while (0)
-
-#define tlb_end_vma(tlb, vma) \
-do { if (!(tlb)->fullmm) \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
-} while (0)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) \
- do { } while (0)
-
#include <asm-generic/tlb.h>
#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd)
--- a/arch/sparc/include/asm/tlb_32.h
+++ b/arch/sparc/include/asm/tlb_32.h
@@ -2,19 +2,6 @@
#ifndef _SPARC_TLB_H
#define _SPARC_TLB_H
-#define tlb_end_vma(tlb, vma) \
-do { \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
-} while (0)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) \
- do { } while (0)
-
-#define tlb_flush(tlb) \
-do { \
- flush_tlb_mm((tlb)->mm); \
-} while (0)
-
#include <asm-generic/tlb.h>
#endif /* _SPARC_TLB_H */
--- a/arch/unicore32/include/asm/tlb.h
+++ b/arch/unicore32/include/asm/tlb.h
@@ -12,10 +12,12 @@
#ifndef __UNICORE_TLB_H__
#define __UNICORE_TLB_H__
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+/*
+ * unicore32 lacks an afficient flush_tlb_range(), use flush_tlb_mm().
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#define __pte_free_tlb(tlb, pte, addr) \
do { \
--- a/arch/xtensa/include/asm/tlb.h
+++ b/arch/xtensa/include/asm/tlb.h
@@ -14,23 +14,6 @@
#include <asm/cache.h>
#include <asm/page.h>
-#if (DCACHE_WAY_SIZE <= PAGE_SIZE)
-
-# define tlb_end_vma(tlb,vma) do { } while (0)
-
-#else
-
-# define tlb_end_vma(tlb, vma) \
- do { \
- if (!tlb->fullmm) \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end); \
- } while(0)
-
-#endif
-
-#define __tlb_remove_tlb_entry(tlb,pte,addr) do { } while (0)
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
#include <asm-generic/tlb.h>
#define __pte_free_tlb(tlb, pte, address) pte_free((tlb)->mm, pte)