Re: [PATCH v2 4/4] spi: spi-davinci: Add support for SPI_CS_WORD

From: Geert Uytterhoeven
Date: Thu Sep 13 2018 - 09:45:02 EST


Hi David,

On Thu, Sep 13, 2018 at 2:40 AM David Lechner <david@xxxxxxxxxxxxxx> wrote:
> This adds support for the SPI_CS_WORD flag to the TI DaVinci SPI
> driver. This mode can be used as long as we are using the hardware
> chip select and not a GPIO chip select.
>
> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
> ---
> drivers/spi/spi-davinci.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
> index d502cf504deb..8f7dcbc53c57 100644
> --- a/drivers/spi/spi-davinci.c
> +++ b/drivers/spi/spi-davinci.c
> @@ -230,7 +230,8 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
> !(spi->mode & SPI_CS_HIGH));
> } else {
> if (value == BITBANG_CS_ACTIVE) {
> - spidat1 |= SPIDAT1_CSHOLD_MASK;
> + if (!(spi->mode & SPI_CS_WORD))
> + spidat1 |= SPIDAT1_CSHOLD_MASK;
> spidat1 &= ~(0x1 << chip_sel);
> }
> }
> @@ -440,8 +441,12 @@ static int davinci_spi_setup(struct spi_device *spi)
> return retval;
> }
>
> - if (internal_cs)
> + if (internal_cs) {
> set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
> + } else if (spi->mode & SPI_CS_WORD) {
> + dev_err(&spi->dev, "SPI_CS_WORD can't be use with GPIO CS\n");
> + return -EINVAL;

Does the SPI core fall back to splitting the transfer in this case?

> + }

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds