Re: [PATCH v3 0/3] Stingray thermal driver support

[Florian Fainelli]

On 08/09/18 05:54, Srinath Mannam wrote:
> These patches adds the stingray thermal driver and its
> corresponding DT nodes with documentation.
> 
> Changes from v2:
>   - All stingray TMON DT nodes are combine together into single.
>     Temperature registers are combined into one mem resource.
>     brcm,tmon-mask parameter has available TMONs mask value.
>   - All available TMONs are initialized together in single
>     instance of driver probe call.
> 
> Changes from v1:
>   - Fixed auto build sparce warning.

Thermal maintainers, can you please review patch #3? The binding and DTS
changes can go through arm-soc if you would like, or you can take
patches 1 and 3 and I take patch 2, either way is fine.

Thank you

> 
> Pramod Kumar (3):
>   dt-bindings: thermal: Add binding document for SR thermal
>   arm64: dts: stingray: Add Stingray Thermal DT support.
>   thermal: broadcom: Add Stingray thermal driver
> 
>  .../bindings/thermal/brcm,sr-thermal.txt           |  23 +++
>  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  13 ++
>  drivers/thermal/Kconfig                            |   3 +-
>  drivers/thermal/broadcom/Kconfig                   |   9 +
>  drivers/thermal/broadcom/Makefile                  |   1 +
>  drivers/thermal/broadcom/sr-thermal.c              | 216 +++++++++++++++++++++
>  6 files changed, 264 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
> 

-- 
Florian