Re: [PATCH] watchdog: mpc8xxx: provide boot status
From: Christophe LEROY
Date: Fri Sep 14 2018 - 09:48:16 EST
Le 13/09/2018 Ã 22:25, Guenter Roeck a ÃcritÂ:
On Thu, Sep 13, 2018 at 08:07:21AM +0000, Christophe Leroy wrote:
mpc8xxx watchdog driver supports the following platforms:
- mpc8xx
- mpc83xx
- mpc86xx
Those three platforms have a 32 bits register which provides the
reason of the last boot, including whether it was caused by the
watchdog.
mpc8xx: Register RSR, bit SWRS (bit 3)
mpc83xx: Register RSR, bit SWRS (bit 28)
mpc86xx: Register RSTRSCR, bit WDT_RR (bit 11)
This patch maps the register as defined in the device tree and updates
wdt.bootstatus based on the value of the watchdog related bit. Then
the information can be retrieved via the WDIOC_GETBOOTSTATUS ioctl.
Hereunder is an exemple of devicetree for mpc8xx,
example
ok
the Reset Status Register being at offset 0x288:
WDT: watchdog@0 {
compatible = "fsl,mpc823-wdt";
reg = <0x0 0x10 0x288 0x4>;
This isn't documented anywhere, and no one wil know how to use it.
So far that was grandfathered in, but with more complex usage
it really needs to be documented.
Ok, added a binding
};
On the mpc83xx, RSR is at offset 0x910
On the mpc86xx, RSTRSCR is at offset 0xe0094
Suggested-by: Radu Rendec <radu.rendec@xxxxxxxxx>
Tested-by: Christophe Leroy <christophe.leroy@xxxxxx> # On mpc885
Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
---
drivers/watchdog/mpc8xxx_wdt.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index aca2d6323f8a..2951a485a6b4 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -49,10 +49,12 @@ struct mpc8xxx_wdt {
struct mpc8xxx_wdt_type {
int prescaler;
bool hw_enabled;
+ u32 rsr_mask;
};
struct mpc8xxx_wdt_ddata {
struct mpc8xxx_wdt __iomem *base;
+ u32 __iomem *rsr;
struct watchdog_device wdd;
spinlock_t lock;
u16 swtc;
@@ -137,6 +139,7 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
struct mpc8xxx_wdt_ddata *ddata;
u32 freq = fsl_get_sys_freq();
bool enabled;
+ struct device *dev = &ofdev->dev;
If you introduce this variable, please use it everywhere
in the function.
ok, introduced it and changed every pr_xxx() to dev_xxx() in a
preceeding patch.
wdt_type = of_device_get_match_data(&ofdev->dev);
if (!wdt_type)
@@ -160,6 +163,22 @@ static int mpc8xxx_wdt_probe(struct platform_device *ofdev)
return -ENODEV;
}
+ res = platform_get_resource(ofdev, IORESOURCE_MEM, 1);
+ ddata->rsr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ddata->rsr)) {
+ dev_info(dev, "Could not map reset status register");
Please, no such message. It would start to show up everywhere unless
devicetree files are updated, which likely won't happen. Then we get
bogged down by people asking where this message suddenly comes from.
ok
+ } else {
+ u32 rsr_v = in_be32(ddata->rsr);
+ bool status = rsr_v & wdt_type->rsr_mask;
+
+ ddata->wdd.bootstatus = status ? WDIOF_CARDRESET : 0;
+ /* clear reset status bits related to watchdog time */
+ out_be32(ddata->rsr, wdt_type->rsr_mask);
+
+ dev_info(dev, "Last boot was %s by watchdog (RSR = 0x%8.8x)\n",
+ status ? "caused" : "not caused", rsr_v);
The hex value of RSR may be interesting for developers, but not for users.
Please drop.
Also, "caused" is redundant. Add it to the base string and add "not "
when needed.
Ok, I did it in v2, allthought I find the code less readable.
+ }
+
spin_lock_init(&ddata->lock);
ddata->wdd.info = &mpc8xxx_wdt_info,
@@ -216,6 +235,7 @@ static const struct of_device_id mpc8xxx_wdt_match[] = {
.compatible = "mpc83xx_wdt",
.data = &(struct mpc8xxx_wdt_type) {
.prescaler = 0x10000,
+ .rsr_mask = BIT(3), /* RSR Bit 28 */
The comment is quite useless. How does BIT(3) match RSR bit 28 ?
I am sure it is because the HW manual counts bits the other way,
but here it is just confusing and thus doesn't add value unless
you provide additional context.
Ok, put the BIT names instead.
Thanks for the review
Christophe
},
},
{
@@ -223,6 +243,7 @@ static const struct of_device_id mpc8xxx_wdt_match[] = {
.data = &(struct mpc8xxx_wdt_type) {
.prescaler = 0x10000,
.hw_enabled = true,
+ .rsr_mask = BIT(20), /* RSTRSCR Bit 11 */
},
},
{
@@ -230,6 +251,7 @@ static const struct of_device_id mpc8xxx_wdt_match[] = {
.data = &(struct mpc8xxx_wdt_type) {
.prescaler = 0x800,
.hw_enabled = true,
+ .rsr_mask = BIT(28), /* RSR Bit 3 */
},
},
{},
--
2.13.3