Re: [PATCH 5/7] MIPS: mscc: ocelot: add GPIO4 pinmuxing DT node

[Quentin Schulz]

Hi Alexandre,

On Fri, Sep 14, 2018 at 04:54:46PM +0200, Alexandre Belloni wrote:
> Hi,
> 
> On 14/09/2018 11:44:26+0200, Quentin Schulz wrote:
> > In order to use GPIO4 as a GPIO, we need to mux it in this mode so let's
> > declare a new pinctrl DT node for it.
> > 
> > Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
> > ---
> >  arch/mips/boot/dts/mscc/ocelot.dtsi | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
> > index 8ce317c..b5c4c74 100644
> > --- a/arch/mips/boot/dts/mscc/ocelot.dtsi
> > +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
> > @@ -182,6 +182,11 @@
> >  			interrupts = <13>;
> >  			#interrupt-cells = <2>;
> >  
> > +			gpio4: gpio4 {
> > +				pins = "GPIO_4";
> > +				function = "gpio";
> > +			};
> > +
> 
> For a GPIO, I would do that in the board dts because it is not used
> directly in the dtsi.
> 

And the day we've two boards using this pinctrl we move it to a dtsi. Is
that the plan?

Thanks,
Quentin

Attachment: signature.asc
Description: PGP signature