Re: kernel 4.18.5 Realtek 8111G network adapter stops responding under high system load

[David Arendt]

Hi,

just a follow up:

In kernel 4.18.8 the behaviour is different.

The network is not reachable a number of times, but restarting to be
reachable by itself before it finally is no longer reachable at all.

Here the logging output:

Sep 15 17:44:43 server kernel: NETDEV WATCHDOG: enp3s0 (r8169): transmit
queue 0 timed out
Sep 15 17:44:43 server kernel: r8169 0000:03:00.0 enp3s0: link up
Sep 15 18:10:26 server kernel: r8169 0000:03:00.0 enp3s0: link up
Sep 15 18:12:24 server kernel: r8169 0000:03:00.0 enp3s0: link up
Sep 15 18:13:19 server kernel: r8169 0000:03:00.0 enp3s0: link up
Sep 15 18:14:48 server kernel: r8169 0000:03:00.0 enp3s0: link up
Sep 15 18:20:24 server kernel: r8169 0000:03:00.0 enp3s0: link up
Sep 15 18:34:19 server kernel: r8169 0000:03:00.0 enp3s0: link up
Sep 15 18:43:43 server kernel: r8169 0000:03:00.0 enp3s0: link up
Sep 15 18:46:26 server kernel: r8169 0000:03:00.0 enp3s0: link up
Sep 15 19:00:24 server kernel: r8169 0000:03:00.0 enp3s0: link up

>From 17:44 ro 18:46 the network is recovering automatically. After the
up from 19:00, the network is no longer reachable without any additional
message.

If looking at ifconfig, the counter for TX packets is incrementing, the
counter for RX packets not.

Here again the driver from 4.17.14 is working flawlessly.

Thanks in advance,
David Arendt


On 9/4/18 8:19 AM, David Arendt wrote:
> Hi,
>
> When using kernel 4.18.5 the Realtek 8111G network adapter stops
> responding under high system load.
>
> Dmesg is showing no errors.
>
> Sometimes an ifconfig enp3s0 down followed by an ifconfig enp3s0 up is
> enough for the network adapter to restart responding. Sometimes a reboot
> is necessary.
>
> When copying r8169.c from 4.17.14 to the 4.18.5 kernel, networking works
> perfectly stable on 4.18.5 so the problem seems r8169.c related.
>
> Here the output from lshw:
>
> ÂÂÂÂÂÂÂ *-pci:2
> ÂÂÂÂÂÂÂÂÂÂÂÂ description: PCI bridge
> ÂÂÂÂÂÂÂÂÂÂÂÂ product: 8 Series/C220 Series Chipset Family PCI Express
> Root Port #3
> ÂÂÂÂÂÂÂÂÂÂÂÂ vendor: Intel Corporation
> ÂÂÂÂÂÂÂÂÂÂÂÂ physical id: 1c.2
> ÂÂÂÂÂÂÂÂÂÂÂÂ bus info: pci@0000:00:1c.2
> ÂÂÂÂÂÂÂÂÂÂÂÂ version: d5
> ÂÂÂÂÂÂÂÂÂÂÂÂ width: 32 bits
> ÂÂÂÂÂÂÂÂÂÂÂÂ clock: 33MHz
> ÂÂÂÂÂÂÂÂÂÂÂÂ capabilities: pci pciexpress msi pm normal_decode
> bus_master cap_list
> ÂÂÂÂÂÂÂÂÂÂÂÂ configuration: driver=pcieport
> ÂÂÂÂÂÂÂÂÂÂÂÂ resources: irq:18 ioport:d000(size=4096)
> memory:f7300000-f73fffff ioport:f2100000(size=1048576)
> ÂÂÂÂÂÂÂÂÂÂ *-network
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ description: Ethernet interface
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ product: RTL8111/8168/8411 PCI Express Gigabit Ethernet
> Controller
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ vendor: Realtek Semiconductor Co., Ltd.
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ physical id: 0
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ bus info: pci@0000:03:00.0
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ logical name: enp3s0
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ version: 0c
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ serial: <hidden>
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ size: 1Gbit/s
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ capacity: 1Gbit/s
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ width: 64 bits
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ clock: 33MHz
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ capabilities: pm msi pciexpress msix vpd bus_master
> cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt
> 1000bt-fd autonegotiation
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ configuration: autonegotiation=on broadcast=yes
> driver=r8169 driverversion=2.3LK-NAPI duplex=full
> firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=yes multicast=yes
> port=MII speed=1Gbit/s
> ÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ resources: irq:18 ioport:d000(size=256)
> memory:f7300000-f7300fff memory:f2100000-f2103fff
>
> Thanks in advance for looking into this,
>
> David Arendt
>
>