[PATCH 1/2] DT: marvell,mmp2: fix TWSI2

From: Lubomir Rintel
Date: Mon Sep 17 2018 - 07:40:15 EST


Marvell keeps their MMP2 datasheet secret, but there are good clues
that TWSI2 is not on 0xd4025000 on that platform, not does it use
IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor:

arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP 58

I'm taking a somewhat educated guess that is probably a copy & paste
error from PXA168 or PXA910 and that the real controller in fact hides
at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17.

I'm also copying some properties from TWSI1 that were missing or
incorrect.

Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2.

Cc: Eric Miao <eric.y.miao@xxxxxxxxx>
Cc: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
arch/arm/boot/dts/mmp2.dtsi | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 766bbb8495b6..47e5b63339d1 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -220,12 +220,15 @@
status = "disabled";
};

- twsi2: i2c@d4025000 {
+ twsi2: i2c@d4031000 {
compatible = "mrvl,mmp-twsi";
- reg = <0xd4025000 0x1000>;
- interrupts = <58>;
+ reg = <0xd4031000 0x1000>;
+ interrupt-parent = <&intcmux17>;
+ interrupts = <0>;
clocks = <&soc_clocks MMP2_CLK_TWSI1>;
resets = <&soc_clocks MMP2_CLK_TWSI1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
};

--
2.17.1