Re: [PATCH v3 3/3] i2c: designware: select gpio/default pin when prepare/unprepare recovery

[Jarkko Nikula]

On 09/17/2018 06:34 AM, Jisheng Zhang wrote:
> + DT maintainers
>
> On Mon, 17 Sep 2018 11:29:49 +0800
> Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx> wrote:
>
> > On some platforms, the sda/scl pins are muxed with gpio functions, so
> > they could be used for recovery. Select the gpio/default pin function
> > when prepare/unprepare recovery.
> >
> > Signed-off-by: Jisheng Zhang <Jisheng.Zhang@xxxxxxxxxxxxx>
> > ---
> >   drivers/i2c/busses/i2c-designware-core.h   |  3 +++
> >   drivers/i2c/busses/i2c-designware-master.c | 22 ++++++++++++++++++++++
> >   2 files changed, 25 insertions(+)
Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>