[PATCH v2 1/2] vfio: add edid api for display (vgpu) devices.

[Gerd Hoffmann]

Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
---
 include/uapi/linux/vfio.h | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
index 1aa7b82e81..78e5a37d83 100644
--- a/include/uapi/linux/vfio.h
+++ b/include/uapi/linux/vfio.h
@@ -301,6 +301,45 @@ struct vfio_region_info_cap_type {
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG	(2)
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG	(3)
 
+#define VFIO_REGION_TYPE_PCI_GFX                (1)
+#define VFIO_REGION_SUBTYPE_GFX_EDID            (1)
+
+/**
+ * Set display link state and edid blob.
+ *
+ * For the edid blob spec look here:
+ * https://en.wikipedia.org/wiki/Extended_Display_Identification_Data
+ *
+ * The guest should be notified about edid changes, for example by
+ * setting the link status to down temporarely (emulate monitor
+ * hotplug).
+ *
+ * @link_state:
+ * VFIO_DEVICE_GFX_LINK_STATE_UP: Monitor is turned on.
+ * VFIO_DEVICE_GFX_LINK_STATE_DOWN: Monitor is turned off.
+ *
+ * @edid_size: Size of the edid data blob.
+ * @edid_blob: The actual edid data.
+ *
+ * Returns 0 on success, error code (such as -EINVAL) on failure.
+ */
+struct vfio_region_gfx_edid {
+	/* device capability hints (read only) */
+	__u32 max_xres;
+	__u32 max_yres;
+	__u32 __reserved1[6];
+
+	/* device state (read/write) */
+	__u32 link_state;
+#define VFIO_DEVICE_GFX_LINK_STATE_UP    1
+#define VFIO_DEVICE_GFX_LINK_STATE_DOWN  2
+	__u32 edid_size;
+	__u32 __reserved2[6];
+
+	/* edid blob (read/write) */
+	__u8 edid_blob[512];
+};
+
 /*
  * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
  * which allows direct access to non-MSIX registers which happened to be within
-- 
2.9.3