Re: [PATCH] pinctrl: intel: Do pin translation in other GPIO operations as well

From: Rajat Jain
Date: Tue Sep 18 2018 - 18:15:25 EST

Next message: Wolfram Sang: "Re: [PATCH] i2c: i2c-qcom-geni: Properly handle DMA safe buffers"
Previous message: Alexandru Gagniuc: "[PATCH v2] PCI/MSI: Don't touch MSI bits when the PCI device is disconnected"
In reply to: Rajat Jain: "Re: [PATCH] pinctrl: intel: Do pin translation in other GPIO operations as well"
Next in thread: Mika Westerberg: "Re: [PATCH] pinctrl: intel: Do pin translation in other GPIO operations as well"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Sep 18, 2018 at 3:04 PM Rajat Jain <rajatja@xxxxxxxxxx> wrote:
>
> On Tue, Sep 18, 2018 at 8:36 AM Mika Westerberg
> <mika.westerberg@xxxxxxxxxxxxxxx> wrote:
> >
> > For some reason I thought GPIOLIB handles translation from GPIO ranges
> > to pinctrl pins but it turns out not to be the case. This means that
> > when GPIOs operations are performed for a pin controller having a custom
> > GPIO base such as Cannon Lake and Ice Lake incorrect pin number gets
> > used internally.
> >
> > Fix this in the same way we did for lock/unlock IRQ operations and
> > translate the GPIO number to pin before using it.
> >
> > Fixes: a60eac3239f0 ("pinctrl: intel: Allow custom GPIO base for pad groups")
> > Reported-by: Rajat Jain <rajatja@xxxxxxxxxx>
> > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
>
> Tested-by: Rajat Jain <rajatja@xxxxxxxxxx>
>
> This has fixed the issue for me.
>
> One question, may not be related: I see this line in my logs everytime
> I export a pin (GPIO40 = pin 16 in this case). Is that an indication
> of a problem?
>
> "gpio gpiochip0: Persistence not supported for GPIO 40"
>

Also consider fixing the checkpatch warning:

Errors:
* checkpatch.pl errors/warnings

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#48: FILE: drivers/pinctrl/intel/pinctrl-intel.c:764:
+static int intel_gpio_to_pin(struct intel_pinctrl *pctrl,
unsigned offset,

> Thanks,
>
> Rajat
>
> On Tue, Sep 18, 2018 at 8:36 AM Mika Westerberg
> <mika.westerberg@xxxxxxxxxxxxxxx> wrote:
> >
> > For some reason I thought GPIOLIB handles translation from GPIO ranges
> > to pinctrl pins but it turns out not to be the case. This means that
> > when GPIOs operations are performed for a pin controller having a custom
> > GPIO base such as Cannon Lake and Ice Lake incorrect pin number gets
> > used internally.
> >
> > Fix this in the same way we did for lock/unlock IRQ operations and
> > translate the GPIO number to pin before using it.
> >
> > Fixes: a60eac3239f0 ("pinctrl: intel: Allow custom GPIO base for pad groups")
> > Reported-by: Rajat Jain <rajatja@xxxxxxxxxx>
> > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > ---
> > drivers/pinctrl/intel/pinctrl-intel.c | 111 +++++++++++++++-----------
> > 1 file changed, 63 insertions(+), 48 deletions(-)
> >
> > diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
> > index 62b009b27eda..ec8dafc94694 100644
> > --- a/drivers/pinctrl/intel/pinctrl-intel.c
> > +++ b/drivers/pinctrl/intel/pinctrl-intel.c
> > @@ -747,13 +747,63 @@ static const struct pinctrl_desc intel_pinctrl_desc = {
> > .owner = THIS_MODULE,
> > };
> >
> > +/**
> > + * intel_gpio_to_pin() - Translate from GPIO offset to pin number
> > + * @pctrl: Pinctrl structure
> > + * @offset: GPIO offset from gpiolib
> > + * @commmunity: Community is filled here if not %NULL
> > + * @padgrp: Pad group is filled here if not %NULL
> > + *
> > + * When coming through gpiolib irqchip, the GPIO offset is not
> > + * automatically translated to pinctrl pin number. This function can be
> > + * used to find out the corresponding pinctrl pin.
> > + */
> > +static int intel_gpio_to_pin(struct intel_pinctrl *pctrl, unsigned offset,
> > + const struct intel_community **community,
> > + const struct intel_padgroup **padgrp)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < pctrl->ncommunities; i++) {
> > + const struct intel_community *comm = &pctrl->communities[i];
> > + int j;
> > +
> > + for (j = 0; j < comm->ngpps; j++) {
> > + const struct intel_padgroup *pgrp = &comm->gpps[j];
> > +
> > + if (pgrp->gpio_base < 0)
> > + continue;
> > +
> > + if (offset >= pgrp->gpio_base &&
> > + offset < pgrp->gpio_base + pgrp->size) {
> > + int pin;
> > +
> > + pin = pgrp->base + offset - pgrp->gpio_base;
> > + if (community)
> > + *community = comm;
> > + if (padgrp)
> > + *padgrp = pgrp;
> > +
> > + return pin;
> > + }
> > + }
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > static int intel_gpio_get(struct gpio_chip *chip, unsigned offset)
> > {
> > struct intel_pinctrl *pctrl = gpiochip_get_data(chip);
> > void __iomem *reg;
> > u32 padcfg0;
> > + int pin;
> > +
> > + pin = intel_gpio_to_pin(pctrl, offset, NULL, NULL);
> > + if (pin < 0)
> > + return -EINVAL;
> >
> > - reg = intel_get_padcfg(pctrl, offset, PADCFG0);
> > + reg = intel_get_padcfg(pctrl, pin, PADCFG0);
> > if (!reg)
> > return -EINVAL;
> >
> > @@ -770,8 +820,13 @@ static void intel_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> > unsigned long flags;
> > void __iomem *reg;
> > u32 padcfg0;
> > + int pin;
> > +
> > + pin = intel_gpio_to_pin(pctrl, offset, NULL, NULL);
> > + if (pin < 0)
> > + return;
> >
> > - reg = intel_get_padcfg(pctrl, offset, PADCFG0);
> > + reg = intel_get_padcfg(pctrl, pin, PADCFG0);
> > if (!reg)
> > return;
> >
> > @@ -790,8 +845,13 @@ static int intel_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
> > struct intel_pinctrl *pctrl = gpiochip_get_data(chip);
> > void __iomem *reg;
> > u32 padcfg0;
> > + int pin;
> >
> > - reg = intel_get_padcfg(pctrl, offset, PADCFG0);
> > + pin = intel_gpio_to_pin(pctrl, offset, NULL, NULL);
> > + if (pin < 0)
> > + return -EINVAL;
> > +
> > + reg = intel_get_padcfg(pctrl, pin, PADCFG0);
> > if (!reg)
> > return -EINVAL;
> >
> > @@ -827,51 +887,6 @@ static const struct gpio_chip intel_gpio_chip = {
> > .set_config = gpiochip_generic_config,
> > };
> >
> > -/**
> > - * intel_gpio_to_pin() - Translate from GPIO offset to pin number
> > - * @pctrl: Pinctrl structure
> > - * @offset: GPIO offset from gpiolib
> > - * @commmunity: Community is filled here if not %NULL
> > - * @padgrp: Pad group is filled here if not %NULL
> > - *
> > - * When coming through gpiolib irqchip, the GPIO offset is not
> > - * automatically translated to pinctrl pin number. This function can be
> > - * used to find out the corresponding pinctrl pin.
> > - */
> > -static int intel_gpio_to_pin(struct intel_pinctrl *pctrl, unsigned offset,
> > - const struct intel_community **community,
> > - const struct intel_padgroup **padgrp)
> > -{
> > - int i;
> > -
> > - for (i = 0; i < pctrl->ncommunities; i++) {
> > - const struct intel_community *comm = &pctrl->communities[i];
> > - int j;
> > -
> > - for (j = 0; j < comm->ngpps; j++) {
> > - const struct intel_padgroup *pgrp = &comm->gpps[j];
> > -
> > - if (pgrp->gpio_base < 0)
> > - continue;
> > -
> > - if (offset >= pgrp->gpio_base &&
> > - offset < pgrp->gpio_base + pgrp->size) {
> > - int pin;
> > -
> > - pin = pgrp->base + offset - pgrp->gpio_base;
> > - if (community)
> > - *community = comm;
> > - if (padgrp)
> > - *padgrp = pgrp;
> > -
> > - return pin;
> > - }
> > - }
> > - }
> > -
> > - return -EINVAL;
> > -}
> > -
> > static int intel_gpio_irq_reqres(struct irq_data *d)
> > {
> > struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> > --
> > 2.18.0
> >

Next message: Wolfram Sang: "Re: [PATCH] i2c: i2c-qcom-geni: Properly handle DMA safe buffers"
Previous message: Alexandru Gagniuc: "[PATCH v2] PCI/MSI: Don't touch MSI bits when the PCI device is disconnected"
In reply to: Rajat Jain: "Re: [PATCH] pinctrl: intel: Do pin translation in other GPIO operations as well"
Next in thread: Mika Westerberg: "Re: [PATCH] pinctrl: intel: Do pin translation in other GPIO operations as well"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]