Re: [PATCH 2/2] video: ssd1307fb: Do not hard code active-low reset sequence

[Michal VokÃÄ]

On 19.9.2018 14:12, Fabio Estevam wrote:
> Hi Michal,
>
> On Wed, Sep 19, 2018 at 6:18 AM, Michal VokÃÄ <michal.vokac@xxxxxxxxx> wrote:
> > The SSD130x OLED display reset signal is active low. Now the reset
> > sequence is implemented in such a way that users are forced to
> > define reset-gpios as GPIO_ACTIVE_HIGH in DT to make the reset work.
> >
> > Do not hard code the active-low sequence into the driver but instead
> > allow the user to specify the gpio as GPIO_ACTIVE_LOW to reflect
> > the real world.
> >
> > The only single in-tree user of the display is converted and builds
> > fine.
> >
> > Signed-off-by: Michal VokÃÄ <michal.vokac@xxxxxxxxx>
> > ---
> > I am not really sure wheater this should be in one commit or the DT
> > changes should be done in separate commit. Just tell me and I will
> > split/merge the changes as you want. Thanks.
>
> Please separate in two patches: one for the dts and another for the driver.

OK, thank you. I will send v2 shortly.

Michal