Re: [PATCH v1] tty: serial: imx: enable IDDMAEN for the last tail data

[Lucas Stach]

Am Donnerstag, den 20.09.2018, 08:39 +0000 schrieb Robin Gong:
> > -----Original Message-----
> > From: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
> > Sent: 2018å9æ20æ 15:55
> > To: Robin Gong <yibin.gong@xxxxxxx>
> > Cc: jslaby@xxxxxxxx; Andy Duan <fugang.duan@xxxxxxx>;
> > linux-serial@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; dl-
> > linux-imx
> > <linux-imx@xxxxxxx>; kernel@xxxxxxxxxxxxxx
> > Subject: Re: [PATCH v1] tty: serial: imx: enable IDDMAEN for the
> > last tail data
> > 
> > Hello,
> > 
> > On Thu, Sep 20, 2018 at 11:26:00PM +0800, Robin Gong wrote:
> > > enable IDDMAEN in UCR4 to let sdma script has the chance to
> > > detect the
> > > idle status and transfer the last tail data with the interrupt
> > > notifying uart driver.Otherwise, the last dma done interrupt of
> > > the
> > > tail data in rxfifo whose size is less than watermark may never
> > > be
> > > received by uart driver.
> > 
> > Is this a theoretic issue? Or does it fix a real problem?
> > 
> > If the former I'd say UCR1_ATDMAEN being set should prevent this
> > stall.
> 
> It's a real fix, you will see 'timeout We read 0 byte' with the
> attached stress test
> running on i.mx7d or i.mx6 if no this patch applied.Â
> ' while [ 1 ]; do /unit_tests/UART/mxc_uart_stress_test.out
> /dev/ttymxc5 2000000 D L 100 100 L; done &'
> Please make sure dma enabled on ttymxcX for your test, and sdma
> firmware setup in your rootfsÂ
> /lib/firmware/imx/sdma/sdma-imx6q.bin or /lib/firmware/imx/sdma/sdma-
> imx7d.bin.
> You can get sdma firmware from below:
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-
> firmware.git/tree/imx/sdma

Please see commit 905c0decad28402aa166975023fb88c8f62f93c8 on why using
the idle detect together with with SDMA is wrong. We don't want to re-
introduce the broken behavior.

Regards,
Lucas