[PATCH 0/9] AHCI and SATA PHY support for BCM63138

[Florian Fainelli]

Hi Kishon, Tejun,

This patch series adds support for the SATA AHCI and PHY found on the
ARM-basd BCM63138 DSL SoCs.

It would probably make sense for patches 1-3 to go through Kishon's
tree, patches 4-7 through Tejun's tree, and I would be merging the last
two patches through the Broadcom ARM-SoC tree.

Let me know if this is not a workable plan, thank you very much!

Florian Fainelli (9):
  dt-bindings: phy: Document BCM63138 compatible string
  phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs
  phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence
  dt-bindings: ata: Document BCM63138 compatible string
  ata: ahci_brcm: Allow optional reset controller to be used
  ata: ahci_brcm: Match BCM63138 compatible strings
  ata: ahci_brcm: Allow using driver or DSL SoCs
  ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
  ARM: bcm63138: Enable SATA AHCI and PHY

 .../bindings/ata/brcm,sata-brcm.txt           |  1 +
 .../devicetree/bindings/phy/brcm-sata-phy.txt |  1 +
 arch/arm/boot/dts/bcm63138.dtsi               | 30 ++++++++
 arch/arm/boot/dts/bcm963138dvt.dts            |  8 +++
 drivers/ata/Kconfig                           |  3 +-
 drivers/ata/ahci_brcm.c                       | 10 +++
 drivers/phy/broadcom/Kconfig                  |  3 +-
 drivers/phy/broadcom/phy-brcm-sata.c          | 70 +++++++++++++++++++
 8 files changed, 124 insertions(+), 2 deletions(-)

-- 
2.17.1