[PATCH v2 2/2] [media] imx214: Add imx214 camera sensor driver
From: Ricardo Ribalda Delgado
Date: Fri Sep 21 2018 - 06:09:31 EST
Add a V4L2 sub-device driver for the Sony IMX214 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
---
Since v2: Thanks Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
- Use regulator_bulk
- Do not set voltages, let the DT do that
- missing consts
- remove i2c_client
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx214.c | 956 +++++++++++++++++++++++++++++++++++++
4 files changed, 977 insertions(+)
create mode 100644 drivers/media/i2c/imx214.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 9989925f658d..2ae68894e700 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13521,6 +13521,14 @@ S: Maintained
F: drivers/ssb/
F: include/linux/ssb/
+SONY IMX214 SENSOR DRIVER
+M: Ricardo Ribalda <ricardo.ribalda@xxxxxxxxx>
+L: linux-media@xxxxxxxxxxxxxxx
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: drivers/media/i2c/imx214.c
+F: Documentation/devicetree/bindings/media/i2c/imx214.txt
+
SONY IMX258 SENSOR DRIVER
M: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index bfdb494686bf..d9416b3a090c 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -595,6 +595,18 @@ config VIDEO_APTINA_PLL
config VIDEO_SMIAPP_PLL
tristate
+config VIDEO_IMX214
+ tristate "Sony IMX214 sensor support"
+ depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on OF
+ depends on MEDIA_CAMERA_SUPPORT
+ help
+ This is a Video4Linux2 sensor driver for the Sony
+ IMX214 camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx214.
+
config VIDEO_IMX258
tristate "Sony IMX258 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index a94eb03d10d4..61305edc6165 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_VIDEO_I2C) += video-i2c.o
obj-$(CONFIG_VIDEO_ML86V7667) += ml86v7667.o
obj-$(CONFIG_VIDEO_OV2659) += ov2659.o
obj-$(CONFIG_VIDEO_TC358743) += tc358743.o
+obj-$(CONFIG_VIDEO_IMX214) += imx214.o
obj-$(CONFIG_VIDEO_IMX258) += imx258.o
obj-$(CONFIG_VIDEO_IMX274) += imx274.o
diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
new file mode 100644
index 000000000000..ea5beba13b04
--- /dev/null
+++ b/drivers/media/i2c/imx214.c
@@ -0,0 +1,956 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * imx214.c - imx214 sensor driver
+ *
+ * Copyright 2018 Qtechnology A/S
+ *
+ * Ricardo Ribalda <ricardo.ribalda@xxxxxxxxx>
+ */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <media/media-entity.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-ctrls.h>
+
+#define IMX214_DEFAULT_CLK_FREQ 24000000
+#define IMX214_DEFAULT_PIXEL_RATE 384000000
+#define IMX214_WIDTH 4096
+#define IMX214_HEIGHT 2304
+#define IMX214_FPS 30
+#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
+
+static const char * const imx214_supply_name[] = {
+ "vdda",
+ "vddd",
+ "vdddo",
+};
+
+#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
+
+struct imx214 {
+ struct device *dev;
+ struct clk *xclk;
+ struct regmap *regmap;
+
+ struct v4l2_fwnode_endpoint ep;
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct v4l2_mbus_framefmt fmt;
+ struct v4l2_rect crop;
+
+ struct v4l2_ctrl_handler ctrls;
+ struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *link_freq;
+
+ struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
+
+ struct gpio_desc *enable_gpio;
+
+ bool power_on;
+};
+
+struct reg_8 {
+ u16 addr;
+ u8 val;
+};
+
+static const struct reg_8 mode_1920x1080[];
+static const struct reg_8 mode_4096x2304[];
+
+/*
+ * Declare modes in order, from biggest
+ * to smallest height.
+ */
+static const struct imx214_mode {
+ u32 width;
+ u32 height;
+ const struct reg_8 *reg_table;
+} imx214_modes[] = {
+ {
+ .width = 4096,
+ .height = 2304,
+ .reg_table = mode_4096x2304,
+ },
+ {
+ .width = 1920,
+ .height = 1080,
+ .reg_table = mode_1920x1080,
+ },
+};
+
+static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct imx214, sd);
+}
+
+static int imx214_set_power_on(struct imx214 *imx214)
+{
+ int ret;
+
+ gpiod_set_value_cansleep(imx214->enable_gpio, 0);
+ usleep_range(10, 20);
+
+ ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
+ if (ret < 0) {
+ dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
+ return ret;
+ }
+
+ usleep_range(2000, 3000);
+
+ ret = clk_prepare_enable(imx214->xclk);
+ if (ret < 0) {
+ dev_err(imx214->dev, "clk prepare enable failed\n");
+ return ret;
+ }
+
+
+ gpiod_set_value_cansleep(imx214->enable_gpio, 1);
+ usleep_range(12000, 15000);
+
+ return 0;
+}
+
+static void imx214_set_power_off(struct imx214 *imx214)
+{
+ gpiod_set_value_cansleep(imx214->enable_gpio, 0);
+
+ clk_disable_unprepare(imx214->xclk);
+
+ regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
+}
+
+static int imx214_s_power(struct v4l2_subdev *sd, int on)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+ int ret = 0;
+
+ on = !!on;
+
+ if (imx214->power_on == on)
+ return 0;
+
+ if (on)
+ ret = imx214_set_power_on(imx214);
+ else
+ imx214_set_power_off(imx214);
+
+ imx214->power_on = on;
+ return 0;
+}
+
+static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->index > 0)
+ return -EINVAL;
+
+ code->code = IMX214_MBUS_CODE;
+
+ return 0;
+}
+
+static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ if (fse->code != IMX214_MBUS_CODE)
+ return -EINVAL;
+
+ if (fse->index >= ARRAY_SIZE(imx214_modes))
+ return -EINVAL;
+
+ fse->min_width = fse->max_width = imx214_modes[fse->index].width;
+ fse->min_height = fse->max_height = imx214_modes[fse->index].height;
+
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int imx214_s_register(struct v4l2_subdev *subdev,
+ const struct v4l2_dbg_register *reg)
+{
+ struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
+
+ return regmap_write(imx214->regmap, reg->reg, reg->val);
+}
+
+static int imx214_g_register(struct v4l2_subdev *subdev,
+ struct v4l2_dbg_register *reg)
+{
+ struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
+ unsigned int aux;
+ int ret;
+
+ reg->size = 1;
+ ret = regmap_read(imx214->regmap, reg->reg, &aux);
+ reg->val = aux;
+ return ret;
+}
+#endif
+
+static const struct v4l2_subdev_core_ops imx214_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = imx214_g_register,
+ .s_register = imx214_s_register,
+#endif
+ .s_power = imx214_s_power,
+};
+
+static struct v4l2_mbus_framefmt *
+__imx214_get_pad_format(struct imx214 *imx214,
+ struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad,
+ enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &imx214->fmt;
+ default:
+ return NULL;
+ }
+}
+
+static int imx214_get_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+
+ format->format = *__imx214_get_pad_format(imx214, cfg, format->pad,
+ format->which);
+
+ return 0;
+}
+
+static struct v4l2_rect *
+__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg,
+ unsigned int pad, enum v4l2_subdev_format_whence which)
+{
+ switch (which) {
+ case V4L2_SUBDEV_FORMAT_TRY:
+ return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad);
+ case V4L2_SUBDEV_FORMAT_ACTIVE:
+ return &imx214->crop;
+ default:
+ return NULL;
+ }
+}
+
+static int imx214_find_mode(u32 height)
+{
+ int i;
+
+ for (i = 0; (i < ARRAY_SIZE(imx214_modes) - 1) ; i++)
+ if (height >= imx214_modes[i].width)
+ return i;
+ return i;
+}
+
+static int imx214_set_format(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+ struct v4l2_mbus_framefmt *__format;
+ struct v4l2_rect *__crop;
+ int mode;
+
+ __crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
+
+ mode = format ? imx214_find_mode(format->format.height) : 0;
+
+ __crop->width = imx214_modes[mode].width;
+ __crop->height = imx214_modes[mode].height;
+
+ __format = __imx214_get_pad_format(imx214, cfg, format->pad,
+ format->which);
+ __format->width = __crop->width;
+ __format->height = __crop->height;
+ __format->code = IMX214_MBUS_CODE;
+ __format->field = V4L2_FIELD_NONE;
+ __format->colorspace = V4L2_COLORSPACE_SRGB;
+ __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
+ __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
+ __format->colorspace, __format->ycbcr_enc);
+ __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
+
+ format->format = *__format;
+
+ return 0;
+}
+
+static int imx214_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct imx214 *imx214 = to_imx214(sd);
+
+ if (sel->target != V4L2_SEL_TGT_CROP)
+ return -EINVAL;
+
+ sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad,
+ sel->which);
+ return 0;
+}
+
+static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg)
+{
+ struct v4l2_subdev_format fmt = { };
+
+ fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
+ fmt.format.width = imx214_modes[0].width;
+ fmt.format.height = imx214_modes[0].height;
+
+ imx214_set_format(subdev, cfg, &fmt);
+
+ return 0;
+}
+
+enum { IMX214_TABLE_WAIT_MS = 0,
+ IMX214_TABLE_END,
+ IMX214_MAX_RETRIES,
+ IMX214_WAIT_MS};
+
+/*From imx214_mode_tbls.h*/
+static const struct reg_8 mode_4096x2304[] = {
+ {0x0114, 0x03},
+ {0x0220, 0x00},
+ {0x0221, 0x11},
+ {0x0222, 0x01},
+ {0x0340, 0x0C},
+ {0x0341, 0x7A},
+ {0x0342, 0x13},
+ {0x0343, 0x90},
+ {0x0344, 0x00},
+ {0x0345, 0x38},
+ {0x0346, 0x01},
+ {0x0347, 0x98},
+ {0x0348, 0x10},
+ {0x0349, 0x37},
+ {0x034A, 0x0A},
+ {0x034B, 0x97},
+ {0x0381, 0x01},
+ {0x0383, 0x01},
+ {0x0385, 0x01},
+ {0x0387, 0x01},
+ {0x0900, 0x00},
+ {0x0901, 0x00},
+ {0x0902, 0x00},
+ {0x3000, 0x35},
+ {0x3054, 0x01},
+ {0x305C, 0x11},
+
+ {0x0112, 0x0A},
+ {0x0113, 0x0A},
+ {0x034C, 0x10},
+ {0x034D, 0x00},
+ {0x034E, 0x09},
+ {0x034F, 0x00},
+ {0x0401, 0x00},
+ {0x0404, 0x00},
+ {0x0405, 0x10},
+ {0x0408, 0x00},
+ {0x0409, 0x00},
+ {0x040A, 0x00},
+ {0x040B, 0x00},
+ {0x040C, 0x10},
+ {0x040D, 0x00},
+ {0x040E, 0x09},
+ {0x040F, 0x00},
+
+ {0x0301, 0x05},
+ {0x0303, 0x02},
+ {0x0305, 0x03},
+ {0x0306, 0x00},
+ {0x0307, 0x96},
+ {0x0309, 0x0A},
+ {0x030B, 0x01},
+ {0x0310, 0x00},
+
+ {0x0820, 0x12},
+ {0x0821, 0xC0},
+ {0x0822, 0x00},
+ {0x0823, 0x00},
+
+ {0x3A03, 0x09},
+ {0x3A04, 0x50},
+ {0x3A05, 0x01},
+
+ {0x0B06, 0x01},
+ {0x30A2, 0x00},
+
+ {0x30B4, 0x00},
+
+ {0x3A02, 0xFF},
+
+ {0x3011, 0x00},
+ {0x3013, 0x01},
+
+ {0x0202, 0x0C},
+ {0x0203, 0x70},
+ {0x0224, 0x01},
+ {0x0225, 0xF4},
+
+ {0x0204, 0x00},
+ {0x0205, 0x00},
+ {0x020E, 0x01},
+ {0x020F, 0x00},
+ {0x0210, 0x01},
+ {0x0211, 0x00},
+ {0x0212, 0x01},
+ {0x0213, 0x00},
+ {0x0214, 0x01},
+ {0x0215, 0x00},
+ {0x0216, 0x00},
+ {0x0217, 0x00},
+
+ {0x4170, 0x00},
+ {0x4171, 0x10},
+ {0x4176, 0x00},
+ {0x4177, 0x3C},
+ {0xAE20, 0x04},
+ {0xAE21, 0x5C},
+
+ {IMX214_TABLE_WAIT_MS, 10},
+ {0x0138, 0x01},
+ {IMX214_TABLE_END, 0x00}
+};
+
+static const struct reg_8 mode_1920x1080[] = {
+ {0x0114, 0x03},
+ {0x0220, 0x00},
+ {0x0221, 0x11},
+ {0x0222, 0x01},
+ {0x0340, 0x0C},
+ {0x0341, 0x7A},
+ {0x0342, 0x13},
+ {0x0343, 0x90},
+ {0x0344, 0x04},
+ {0x0345, 0x78},
+ {0x0346, 0x03},
+ {0x0347, 0xFC},
+ {0x0348, 0x0B},
+ {0x0349, 0xF7},
+ {0x034A, 0x08},
+ {0x034B, 0x33},
+ {0x0381, 0x01},
+ {0x0383, 0x01},
+ {0x0385, 0x01},
+ {0x0387, 0x01},
+ {0x0900, 0x00},
+ {0x0901, 0x00},
+ {0x0902, 0x00},
+ {0x3000, 0x35},
+ {0x3054, 0x01},
+ {0x305C, 0x11},
+
+ {0x0112, 0x0A},
+ {0x0113, 0x0A},
+ {0x034C, 0x07},
+ {0x034D, 0x80},
+ {0x034E, 0x04},
+ {0x034F, 0x38},
+ {0x0401, 0x00},
+ {0x0404, 0x00},
+ {0x0405, 0x10},
+ {0x0408, 0x00},
+ {0x0409, 0x00},
+ {0x040A, 0x00},
+ {0x040B, 0x00},
+ {0x040C, 0x07},
+ {0x040D, 0x80},
+ {0x040E, 0x04},
+ {0x040F, 0x38},
+
+ {0x0301, 0x05},
+ {0x0303, 0x02},
+ {0x0305, 0x03},
+ {0x0306, 0x00},
+ {0x0307, 0x96},
+ {0x0309, 0x0A},
+ {0x030B, 0x01},
+ {0x0310, 0x00},
+
+ {0x0820, 0x12},
+ {0x0821, 0xC0},
+ {0x0822, 0x00},
+ {0x0823, 0x00},
+
+ {0x3A03, 0x04},
+ {0x3A04, 0xF8},
+ {0x3A05, 0x02},
+
+ {0x0B06, 0x01},
+ {0x30A2, 0x00},
+
+ {0x30B4, 0x00},
+
+ {0x3A02, 0xFF},
+
+ {0x3011, 0x00},
+ {0x3013, 0x01},
+
+ {0x0202, 0x0C},
+ {0x0203, 0x70},
+ {0x0224, 0x01},
+ {0x0225, 0xF4},
+
+ {0x0204, 0x00},
+ {0x0205, 0x00},
+ {0x020E, 0x01},
+ {0x020F, 0x00},
+ {0x0210, 0x01},
+ {0x0211, 0x00},
+ {0x0212, 0x01},
+ {0x0213, 0x00},
+ {0x0214, 0x01},
+ {0x0215, 0x00},
+ {0x0216, 0x00},
+ {0x0217, 0x00},
+
+ {0x4170, 0x00},
+ {0x4171, 0x10},
+ {0x4176, 0x00},
+ {0x4177, 0x3C},
+ {0xAE20, 0x04},
+ {0xAE21, 0x5C},
+
+ {IMX214_TABLE_WAIT_MS, 10},
+ {0x0138, 0x01},
+ {IMX214_TABLE_END, 0x00}
+};
+
+static struct reg_8 mode_table_common[] = {
+ /* software reset */
+
+ /* software standby settings */
+ {0x0100, 0x00},
+
+ /* ATR setting */
+ {0x9300, 0x02},
+
+ /* external clock setting */
+ {0x0136, 0x18},
+ {0x0137, 0x00},
+
+ /* global setting */
+ /* basic config */
+ {0x0101, 0x00},
+ {0x0105, 0x01},
+ {0x0106, 0x01},
+ {0x4550, 0x02},
+ {0x4601, 0x00},
+ {0x4642, 0x05},
+ {0x6227, 0x11},
+ {0x6276, 0x00},
+ {0x900E, 0x06},
+ {0xA802, 0x90},
+ {0xA803, 0x11},
+ {0xA804, 0x62},
+ {0xA805, 0x77},
+ {0xA806, 0xAE},
+ {0xA807, 0x34},
+ {0xA808, 0xAE},
+ {0xA809, 0x35},
+ {0xA80A, 0x62},
+ {0xA80B, 0x83},
+ {0xAE33, 0x00},
+
+ /* analog setting */
+ {0x4174, 0x00},
+ {0x4175, 0x11},
+ {0x4612, 0x29},
+ {0x461B, 0x12},
+ {0x461F, 0x06},
+ {0x4635, 0x07},
+ {0x4637, 0x30},
+ {0x463F, 0x18},
+ {0x4641, 0x0D},
+ {0x465B, 0x12},
+ {0x465F, 0x11},
+ {0x4663, 0x11},
+ {0x4667, 0x0F},
+ {0x466F, 0x0F},
+ {0x470E, 0x09},
+ {0x4909, 0xAB},
+ {0x490B, 0x95},
+ {0x4915, 0x5D},
+ {0x4A5F, 0xFF},
+ {0x4A61, 0xFF},
+ {0x4A73, 0x62},
+ {0x4A85, 0x00},
+ {0x4A87, 0xFF},
+
+ /* embedded data */
+ {0x5041, 0x04},
+ {0x583C, 0x04},
+ {0x620E, 0x04},
+ {0x6EB2, 0x01},
+ {0x6EB3, 0x00},
+ {0x9300, 0x02},
+
+ /* imagequality */
+ /* HDR setting */
+ {0x3001, 0x07},
+ {0x6D12, 0x3F},
+ {0x6D13, 0xFF},
+ {0x9344, 0x03},
+ {0x9706, 0x10},
+ {0x9707, 0x03},
+ {0x9708, 0x03},
+ {0x9E04, 0x01},
+ {0x9E05, 0x00},
+ {0x9E0C, 0x01},
+ {0x9E0D, 0x02},
+ {0x9E24, 0x00},
+ {0x9E25, 0x8C},
+ {0x9E26, 0x00},
+ {0x9E27, 0x94},
+ {0x9E28, 0x00},
+ {0x9E29, 0x96},
+
+ /* CNR parameter setting */
+ {0x69DB, 0x01},
+
+ /* Moire reduction */
+ {0x6957, 0x01},
+
+ /* image enhancment */
+ {0x6987, 0x17},
+ {0x698A, 0x03},
+ {0x698B, 0x03},
+
+ /* white balanace */
+ {0x0B8E, 0x01},
+ {0x0B8F, 0x00},
+ {0x0B90, 0x01},
+ {0x0B91, 0x00},
+ {0x0B92, 0x01},
+ {0x0B93, 0x00},
+ {0x0B94, 0x01},
+ {0x0B95, 0x00},
+
+ /* ATR setting */
+ {0x6E50, 0x00},
+ {0x6E51, 0x32},
+ {0x9340, 0x00},
+ {0x9341, 0x3C},
+ {0x9342, 0x03},
+ {0x9343, 0xFF},
+ {IMX214_TABLE_END, 0x00}
+};
+
+#define MAX_CMD 4
+static int imx214_write_table(struct imx214 *imx214,
+ const struct reg_8 table[])
+{
+ u8 vals[MAX_CMD];
+ int ret;
+ int i;
+
+ for (table = table; table->addr != IMX214_TABLE_END ; table++) {
+ if (table->addr == IMX214_TABLE_WAIT_MS) {
+ msleep(table->val);
+ continue;
+ }
+
+ for (i = 0; i < MAX_CMD; i++) {
+ if (table[i].addr != (table[0].addr + i))
+ break;
+ vals[i] = table[i].val;
+ }
+
+ ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
+
+ if (ret) {
+ dev_err(imx214->dev, "write_table error: %d\n", ret);
+ return ret;
+ }
+
+ table += i - 1;
+
+ }
+
+ return 0;
+}
+
+
+static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+ struct imx214 *imx214 = to_imx214(subdev);
+ int ret;
+
+ if (enable) {
+ int mode = imx214_find_mode(imx214->fmt.height);
+
+ ret = imx214_write_table(imx214, mode_table_common);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent common table %d\n",
+ ret);
+ return ret;
+ }
+ ret = imx214_write_table(imx214, imx214_modes[mode].reg_table);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent mode table %d\n",
+ ret);
+ return ret;
+ }
+ ret = v4l2_ctrl_handler_setup(&imx214->ctrls);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sync v4l2 controls\n");
+ return ret;
+ }
+ ret = regmap_write(imx214->regmap, 0x100, 1);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent start table %d\n",
+ ret);
+ return ret;
+ }
+ } else {
+ ret = regmap_write(imx214->regmap, 0x100, 0);
+ if (ret < 0) {
+ dev_err(imx214->dev, "could not sent stop table %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_frame_interval *fival)
+{
+ fival->pad = 0;
+ fival->interval.numerator = 1;
+ fival->interval.denominator = IMX214_FPS;
+
+ return 0;
+}
+
+static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ int mode;
+
+ if (fie->index != 0)
+ return -EINVAL;
+
+ mode = imx214_find_mode(fie->height);
+
+ fie->code = IMX214_MBUS_CODE;
+ fie->width = imx214_modes[mode].width;
+ fie->height = imx214_modes[mode].height;
+ fie->interval.numerator = 1;
+ fie->interval.denominator = IMX214_MBUS_CODE;
+
+ return 0;
+}
+
+static const struct v4l2_subdev_video_ops imx214_video_ops = {
+ .s_stream = imx214_s_stream,
+ .g_frame_interval = imx214_g_frame_interval,
+ .s_frame_interval = imx214_g_frame_interval,
+};
+
+static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
+ .enum_mbus_code = imx214_enum_mbus_code,
+ .enum_frame_size = imx214_enum_frame_size,
+ .enum_frame_interval = imx214_enum_frame_interval,
+ .get_fmt = imx214_get_format,
+ .set_fmt = imx214_set_format,
+ .get_selection = imx214_get_selection,
+ .init_cfg = imx214_entity_init_cfg,
+};
+
+static const struct v4l2_subdev_ops imx214_subdev_ops = {
+ .core = &imx214_core_ops,
+ .video = &imx214_video_ops,
+ .pad = &imx214_subdev_pad_ops,
+};
+
+static const struct regmap_config sensor_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
+{
+ int i;
+
+ for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
+ imx214->supplies[i].supply = imx214_supply_name[i];
+
+ return devm_regulator_bulk_get(dev,
+ IMX214_NUM_SUPPLIES,
+ imx214->supplies);
+}
+
+static int imx214_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct imx214 *imx214;
+ struct fwnode_handle *endpoint;
+ int ret;
+ static const s64 link_freq[] = {
+ (IMX214_DEFAULT_PIXEL_RATE * 10LL) / 8,
+ };
+
+ imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
+ if (!imx214)
+ return -ENOMEM;
+
+ imx214->dev = dev;
+
+ endpoint = fwnode_graph_get_next_endpoint(
+ of_fwnode_handle(client->dev.of_node), NULL);
+ if (!endpoint) {
+ dev_err(dev, "endpoint node not found\n");
+ return -EINVAL;
+ }
+
+ ret = v4l2_fwnode_endpoint_parse(endpoint, &imx214->ep);
+ fwnode_handle_put(endpoint);
+ if (ret < 0) {
+ dev_err(dev, "parsing endpoint node failed\n");
+ return ret;
+ }
+
+ if (imx214->ep.bus_type != V4L2_MBUS_CSI2) {
+ dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
+ imx214->ep.bus_type, V4L2_MBUS_CSI2);
+ return -EINVAL;
+ }
+
+ imx214->xclk = devm_clk_get(dev, "xclk");
+ if (IS_ERR(imx214->xclk)) {
+ dev_err(dev, "could not get xclk");
+ return PTR_ERR(imx214->xclk);
+ }
+
+ ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
+ if (ret) {
+ dev_err(dev, "could not set xclk frequency\n");
+ return ret;
+ }
+
+ ret = imx214_get_regulators(dev, imx214);
+ if (ret < 0) {
+ dev_err(dev, "cannot get regulators\n");
+ return ret;
+ }
+
+ imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(imx214->enable_gpio)) {
+ dev_err(dev, "cannot get enable gpio\n");
+ return PTR_ERR(imx214->enable_gpio);
+ }
+
+ imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
+ if (IS_ERR(imx214->regmap)) {
+ dev_err(dev, "regmap init failed\n");
+ return PTR_ERR(imx214->regmap);
+ }
+
+ v4l2_ctrl_handler_init(&imx214->ctrls, 2);
+
+ imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
+ V4L2_CID_PIXEL_RATE, 0,
+ IMX214_DEFAULT_PIXEL_RATE, 1,
+ IMX214_DEFAULT_PIXEL_RATE);
+ imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
+ V4L2_CID_LINK_FREQ,
+ ARRAY_SIZE(link_freq) - 1,
+ 0, link_freq);
+ if (imx214->link_freq)
+ imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ ret = imx214->ctrls.error;
+ if (ret) {
+ dev_err(&client->dev, "%s control init failed (%d)\n",
+ __func__, ret);
+ goto free_ctrl;
+ }
+
+ imx214->sd.ctrl_handler = &imx214->ctrls;
+ ret = v4l2_ctrl_handler_setup(imx214->sd.ctrl_handler);
+ if (ret) {
+ dev_err(&client->dev,
+ "Error %d setting default controls\n", ret);
+ goto free_ctrl;
+ }
+
+ v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
+ imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
+ imx214->sd.dev = &client->dev;
+ imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+ ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
+ if (ret < 0) {
+ dev_err(dev, "could not register media entity\n");
+ goto free_ctrl;
+ }
+
+ imx214_entity_init_cfg(&imx214->sd, NULL);
+
+ ret = v4l2_async_register_subdev_sensor_common(&imx214->sd);
+ if (ret < 0) {
+ dev_err(dev, "could not register v4l2 device\n");
+ goto free_entity;
+ }
+
+ return 0;
+
+free_entity:
+ media_entity_cleanup(&imx214->sd.entity);
+free_ctrl:
+ v4l2_ctrl_handler_free(&imx214->ctrls);
+
+ return ret;
+}
+
+static int imx214_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct imx214 *imx214 = to_imx214(sd);
+
+ v4l2_async_unregister_subdev(&imx214->sd);
+ media_entity_cleanup(&imx214->sd.entity);
+ v4l2_ctrl_handler_free(&imx214->ctrls);
+
+ return 0;
+}
+
+static const struct of_device_id imx214_of_match[] = {
+ { .compatible = "sony,imx214" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, imx214_of_match);
+
+static struct i2c_driver imx214_i2c_driver = {
+ .driver = {
+ .of_match_table = imx214_of_match,
+ .name = "imx214",
+ },
+ .probe_new = imx214_probe,
+ .remove = imx214_remove,
+};
+
+module_i2c_driver(imx214_i2c_driver);
+
+MODULE_DESCRIPTION("Sony IMX214 Camera drier");
+MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@xxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
--
2.18.0