Re: [PATCH v6 1/2] iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
From: Jonathan Cameron
Date: Sat Sep 22 2018 - 11:24:06 EST
On Sat, 22 Sep 2018 20:26:58 +0530
Himanshu Jha <himanshujha199640@xxxxxxxxx> wrote:
> On Sat, Sep 22, 2018 at 03:46:58PM +0100, Jonathan Cameron wrote:
> > On Tue, 18 Sep 2018 16:24:21 +0800
> > Song Qiang <songqiang1304521@xxxxxxxxx> wrote:
> >
> > > This driver was originally written by ST in 2016 as a misc input device
> > > driver, and hasn't been maintained for a long time. I grabbed some code
> > > from it's API and reformed it into an iio proximity device driver.
> > > This version of driver uses i2c bus to talk to the sensor and
> > > polling for measuring completes, so no irq line is needed.
> > > It can be tested with reading from
> > > /sys/bus/iio/devices/iio:deviceX/in_distance_input
> > >
> > > Signed-off-by: Song Qiang <songqiang1304521@xxxxxxxxx>
> > There are a few bits and bobs in here, but as they are all minor and
> > one at least was me giving you wrong advise, I've fixed it up.
> >
> > Please check I haven't made a mess of it!
> >
> > Applied with changes to the togreg branch of iio.git and pushed out
> > as testing (where it should be visible now) for the autobuilders to
> > play with it.
>
> The SPDX license identifier is inconsistent!
>
> > +// SPDX-License-Identifier: GPL-2.0+
>
> > +MODULE_LICENSE("GPL v2");
>
> 216 For 'GNU General Public License (GPL) version 2 only' use:
> 217 SPDX-License-Identifier: GPL-2.0
> 218 For 'GNU General Public License (GPL) version 2 or any later version' use:
> 219 SPDX-License-Identifier: GPL-2.0+
>
>
Good spot.
I'll fix that up as well.
I'll assume the MODULE_LICENCE is right for now as it seems likely to have come
from the original ST code.
Jonathan