[PATCH v4 1/2] dt-bindings: hwmon: Add ina3221 documentation

[Nicolin Chen]

Texas Instruments INA3221 is a triple-channel shunt and bus
voltage monitor. This patch adds a DT binding doc for it.

Signed-off-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx>
---
Changelog
v3->v4:
 * Removed the attempt of putting labels in the node names
 * Added a new optional label property in the child node
 * Updated examples accordingly
v2->v3:
 * Added a simple subject in the line 1
 * Fixed the shunt resistor value in the example
v1->v2:
 * Dropped channel name properties
 * Added child node definitions.
 * * Added shunt resistor property in the child node
 * * Added status property to indicate connection status
 * * Changed to use child node name as the label of input source

 .../devicetree/bindings/hwmon/ina3221.txt     | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/ina3221.txt

diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
new file mode 100644
index 000000000000..7d90bfe34adb
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt
@@ -0,0 +1,42 @@
+Texas Instruments INA3221 Device Tree Bindings
+
+1) ina3221 node
+  Required properties:
+  - compatible: Must be "ti,ina3221"
+  - reg: I2C address
+
+  = The node contains optional child nodes for three channels =
+  = Each child node describes the information of input source =
+
+  Example:
+
+  ina3221@40 {
+          compatible = "ti,ina3221";
+          reg = <0x40>;
+          [ child node definitions... ]
+  };
+
+2) child nodes
+  Required properties:
+  - input-id: Must be 1, 2 or 3
+
+  Optional properties:
+  - input-label: Name of the input source
+  - shunt-resistor: Shunt resistor value in micro-Ohm
+  - status: Should be "disabled" if no input source
+
+  Example:
+
+  input1 {
+          input-id = <0x1>;
+          status = "disabled";
+  };
+  input2 {
+          input-id = <0x2>;
+          shunt-resistor = <5000>;
+  };
+  input3 {
+          input-id = <0x3>;
+          input-label = "VDD_5V";
+          shunt-resistor = <5000>;
+  };
-- 
2.17.1