Re: [Patch v7 21/22] CIFS: SMBD: Upper layer performs SMB read via RDMA write through memory registration
From: Tom Talpey
Date: Mon Sep 24 2018 - 00:00:15 EST
On 9/23/2018 2:24 PM, Stefan Metzmacher wrote:
Hi Tom,
I just tested that setting:
mr->iova &= (PAGE_SIZE - 1);
mr->iova |= 0xFFFFFFFF00000000;
after the ib_map_mr_sg() and before doing the IB_WR_REG_MR, seems to
work.
Good! As you know, we were concerned about it after seeing that
the ib_dma_map_sg() code was unconditionally setting it to the
dma_mapped address. By salting those FFFF's with varying data,
this should give your FRWR regions stronger integrity in addition
to not leaking kernel "addresses" to the wire.
Just wondering... Isn't the thing we use called FRMR?
They're basically the same concept, it's a subtle difference.
FRMR = Fast Register Memory Region
FRWR = Fast Register Work Request
The memory region is the mr itself, this is created early on.
The work request is built when actually binding the physical
pages to the region, and setting the offset, length, etc, which
is what's happening in the routine that I made the comment on.
So, for this discussion I chose to say FRWR. Sorry for any
confusion!
Tom.