[PATCH 4.18 080/235] ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci

From: Greg Kroah-Hartman
Date: Mon Sep 24 2018 - 08:38:08 EST


4.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bhushan Shah <bshah@xxxxxxx>

[ Upstream commit 03864e57770a9541e7ff3990bacf2d9a2fffcd5d ]

The kernel would not boot on the hammerhead hardware due to the
following error:

mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr: 0x00000200 | Version: 0x00003802
mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000200
mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023
mmc0: sdhci: Present: 0x03e80000 | Host ctl: 0x00000034
mmc0: sdhci: Power: 0x00000001 | Blk gap: 0x00000000
mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
mmc0: sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
mmc0: sdhci: Int enab: 0x02ff900b | Sig enab: 0x02ff100b
mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps: 0x642dc8b2 | Caps_1: 0x00008007
mmc0: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000
mmc0: sdhci: Resp[0]: 0x00000c00 | Resp[1]: 0x00000000
mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
mmc0: sdhci: Host ctl2: 0x00000008
mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x70040220
mmc0: sdhci: ============================================
mmc0: Card stuck in wrong state! mmcblk0 card_busy_detect status: 0xe00
mmc0: cache flush error -110
mmc0: Reset 0x1 never completed.

This patch increases the load on l20 to 0.2 amps for the sdhci
and allows the device to boot normally.

Signed-off-by: Bhushan Shah <bshah@xxxxxxx>
Signed-off-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Suggested-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Tested-by: Brian Masney <masneyb@xxxxxxxxxxxxx>
Signed-off-by: Andy Gross <andy.gross@xxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 ++
1 file changed, 2 insertions(+)

--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -189,6 +189,8 @@
regulator-max-microvolt = <2950000>;

regulator-boot-on;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
};

l21 {