[PATCH AUTOSEL 3.18 10/13] mac80211: Fix station bandwidth setting after channel switch

[Sasha Levin]

From: Ilan Peer <ilan.peer@xxxxxxxxx>

[ Upstream commit 0007e94355fdb71a1cf5dba0754155cba08f0666 ]

When performing a channel switch flow for a managed interface, the
flow did not update the bandwidth of the AP station and the rate
scale algorithm. In case of a channel width downgrade, this would
result with the rate scale algorithm using a bandwidth that does not
match the interface channel configuration.

Fix this by updating the AP station bandwidth and rate scaling algorithm
before the actual channel change in case of a bandwidth downgrade, or
after the actual channel change in case of a bandwidth upgrade.

Signed-off-by: Ilan Peer <ilan.peer@xxxxxxxxx>
Signed-off-by: Luca Coelho <luciano.coelho@xxxxxxxxx>
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
 net/mac80211/mlme.c | 53 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 690fbac121d2..56eb7516c7c9 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -970,6 +970,10 @@ static void ieee80211_chswitch_work(struct work_struct *work)
 	 */
 
 	if (sdata->reserved_chanctx) {
+		struct ieee80211_supported_band *sband = NULL;
+		struct sta_info *mgd_sta = NULL;
+		enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_20;
+
 		/*
 		 * with multi-vif csa driver may call ieee80211_csa_finish()
 		 * many times while waiting for other interfaces to use their
@@ -978,6 +982,48 @@ static void ieee80211_chswitch_work(struct work_struct *work)
 		if (sdata->reserved_ready)
 			goto out;
 
+		if (sdata->vif.bss_conf.chandef.width !=
+		    sdata->csa_chandef.width) {
+			/*
+			 * For managed interface, we need to also update the AP
+			 * station bandwidth and align the rate scale algorithm
+			 * on the bandwidth change. Here we only consider the
+			 * bandwidth of the new channel definition (as channel
+			 * switch flow does not have the full HT/VHT/HE
+			 * information), assuming that if additional changes are
+			 * required they would be done as part of the processing
+			 * of the next beacon from the AP.
+			 */
+			switch (sdata->csa_chandef.width) {
+			case NL80211_CHAN_WIDTH_20_NOHT:
+			case NL80211_CHAN_WIDTH_20:
+			default:
+				bw = IEEE80211_STA_RX_BW_20;
+				break;
+			case NL80211_CHAN_WIDTH_40:
+				bw = IEEE80211_STA_RX_BW_40;
+				break;
+			case NL80211_CHAN_WIDTH_80:
+				bw = IEEE80211_STA_RX_BW_80;
+				break;
+			case NL80211_CHAN_WIDTH_80P80:
+			case NL80211_CHAN_WIDTH_160:
+				bw = IEEE80211_STA_RX_BW_160;
+				break;
+			}
+
+			mgd_sta = sta_info_get(sdata, ifmgd->bssid);
+			sband =
+				local->hw.wiphy->bands[sdata->csa_chandef.chan->band];
+		}
+
+		if (sdata->vif.bss_conf.chandef.width >
+		    sdata->csa_chandef.width) {
+			mgd_sta->sta.bandwidth = bw;
+			rate_control_rate_update(local, sband, mgd_sta,
+						 IEEE80211_RC_BW_CHANGED);
+		}
+
 		ret = ieee80211_vif_use_reserved_context(sdata);
 		if (ret) {
 			sdata_info(sdata,
@@ -988,6 +1034,13 @@ static void ieee80211_chswitch_work(struct work_struct *work)
 			goto out;
 		}
 
+		if (sdata->vif.bss_conf.chandef.width <
+		    sdata->csa_chandef.width) {
+			mgd_sta->sta.bandwidth = bw;
+			rate_control_rate_update(local, sband, mgd_sta,
+						 IEEE80211_RC_BW_CHANGED);
+		}
+
 		goto out;
 	}
 
-- 
2.17.1