Re: [PATCH V3 0/4] Changes for SDCC5 version

From: Craig
Date: Tue Sep 25 2018 - 11:39:47 EST




On 25 September 2018 12:17:26 BST, Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx> wrote:
>
>On 9/25/2018 1:18 AM, Craig Tatlor wrote:
>> What socs have you tested this on?
>> On sdm660 it seems to crash device
>> when writing pwr ctl.
>
>Hi
>We have tested this on SDM845.
>SDM660 also has SDCC5 controller, so you would need to define
>"qcom,sdhci-msm-v5" in your platform dt.
>Can you confirm if you have defined this?
>
Hi,
Yes my DT entry is as follows

sdhc_1: sdhci@f9824900 {
compatible = "qcom,sdhci-msm-v5";
reg = <0xc0c4000 0x1000>, <0xc0c5000 0x1000>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_irq";

bus-width = <8>;
non-removable;

vmmc-supply = <&pm660l_l4>;
vqmmc-supply = <&pm660_l8>;

pinctrl-names = "default";
pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data &sdc1_rclk>;

clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
};

>BTW, can you please share few details of the platform that you are
>checking?
>We are not aware of any dev platform based on SDM660. This is just for
>my info

I'm checking on the sony xperia xa2 (pioneer) smartphone.
>
>> On Tue, Jun 19, 2018 at 11:09:17AM +0530, Vijay Viswanath wrote:
>>> With SDCC5, the MCI register space got removed and the offset/order
>of
>>> several registers have changed. Based on SDCC version used and the
>register,
>>> we need to pick the base address and offset.
>>>
>>> Depends on patch series: "[PATCH V5 0/2] mmc: sdhci-msm: Configuring
>IO_PAD support for sdhci-msm"
>>>
>>> Changes since RFC:
>>> Dropped voltage regulator changes in sdhci-msm
>>> Split the "Register changes for sdcc V5" patch
>>> Instead of checking mci removal for deciding which base addr to
>use,
>>> new function pointers are defined for the 2 variants of sdcc:
>>> 1) MCI present
>>> 2) V5 (mci removed)
>>> Instead of string comparing with the compatible string from DT
>file,
>>> the sdhci_msm_probe will now pick the data associated with the
>>> compatible entry and use it to load variant specific address
>offsets
>>> and msm variant specific read/write ops.
>>>
>>> Changes since V1:
>>> Removed unused msm_reab & msm_writeb APIs
>>> Changed certain register addresses from uppercase to lowercase hex
>>> letters
>>> Removed extra lines and spaces
>>> Split "[PATCH V1 0/3] Changes for SDCC5 version" patch into two,
>>> one for Documentation and other for the driver changes.
>>>
>>> Changes since V2:
>>> Used lower case for macro function defenitions
>>> Removed unused function pointers for msm_readb & msm_writeb
>>>
>>>
>>> Sayali Lokhande (3):
>>> mmc: sdhci-msm: Define new Register address map
>>> Documentation: sdhci-msm: Add new compatible string for SDCC v5
>>> mmc: host: Register changes for sdcc V5
>>>
>>> Vijay Viswanath (1):
>>> mmc: sdhci-msm: Add msm version specific ops and data structures
>>>
>>> .../devicetree/bindings/mmc/sdhci-msm.txt | 7 +-
>>> drivers/mmc/host/sdhci-msm.c | 511
>++++++++++++++++-----
>>> 2 files changed, 391 insertions(+), 127 deletions(-)
>>>
>>> --
>>> Qualcomm India Private Limited, on behalf of Qualcomm Innovation
>Center, Inc.
>>> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a
>Linux Foundation Collaborative Project.
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe
>linux-arm-msm" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>Thanks,
>Veera

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.