Re: [PATCH v2 00/34] ARM: dts: tegra: colibri_t30: major revamp

[Thierry Reding]

On Sat, Sep 01, 2018 at 10:12:14AM +0200, Marcel Ziswiler wrote:
> This series is a major overhaul for the Toradex Colibri T30 system on
> module.
> 
> Changes in v2:
> - Also move serial UART "nvidia,tegra30-hsuart" compatible to module
>   level device trees.
> - Also replace underscores in node names with dashes.
> - Also replace underscores in UART annotations with dashes.
> - When running some more tests I realized that the reg-addr should
>   really be 0x3f. Fix this.
> - Get rid of fake clocks simple bus as suggested by Rob.
> - Drop "[PATCH 01/26] ARM: tegra: colibri_t30: enable broken-hpi on
>   emmc" which should already be handled by the broken-hpi quirk as
>   pointed out by Dmitry. If I would find more eMMC parts which exhibit
>   the issue I will add them to the quirk as a separate patch.
> - New patch as suggested by Rob.
> - New patch.
> 
> Marcel Ziswiler (34):
>   ARM: tegra: colibri_t30: add local-mac-address property
>   ARM: tegra: colibri_t30: reorder host1x/hdmi properties
>   ARM: tegra: colibri_t30: regulator clean-up
>   ARM: tegra: colibri_t30: add missing regulators
>   ARM: tegra: colibri_t30: annotate uarts and move compatible to board
>   ARM: tegra: colibri_t30: white-space clean-up
>   ARM: tegra: colibri_t30: move dr_mode property from phy to controller
>   ARM: tegra: colibri_t30: reorder backlight properties
>   ARM: tegra: colibri_t30: drop pwmleds
>   ARM: tegra: colibri_t30: pinmux clean-up
>   ARM: tegra: colibri_t30: add missing pinmux
>   ARM: tegra: colibri_t30: use proper irq-gpio for stmpe811
>   ARM: tegra: colibri_t30: further lm95245 temperature sensor annotation
>   ARM: tegra: colibri_t30: add i2c-thermtrip
>   ARM: tegra: colibri_t30: add proper emmc vmmc and vqmmc supplies
>   ARM: tegra: colibri_t30: enable emmc ddr52 mode
>   ARM: tegra: colibri_t30: get rid of fake clocks simple bus
>   ARM: tegra: colibri_t30: line break long compatible property line
>   ARM: tegra: colibri_t30: move input include to carrier board
>   ARM: tegra: colibri_t30: remove unused nvidia,is-wired property
>   ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip
>   ARM: tegra: colibri_t30: enable hda over hdmi
>   ARM: tegra: colibri_t30: annotate sd card detect
>   ARM: tegra: colibri_t30: annotate ehci instance 1
>   ARM: tegra: colibri_t30: update compatibility comment
>   ARM: tegra: colibri_t30: drop module level model and compatible
>   ARM: tegra: colibri_t30: drop obsolete spidev node
>   ARM: tegra: colibri_t30: rename hdmiddc to hdmi_ddc
>   ARM: tegra: colibri_t30: rename tps65911@2d, stmpe811@41 and
>     tps62362@60
>   ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity
>   ARM: tegra: colibri_t30: remove unused mcp2515 can0 label
>   ARM: tegra: colibri_t30: add mcp2515 vdd and xceiver supplies
>   ARM: tegra: colibri_t30: annotate unused i2c busses
>   ARM: tegra: colibri_t30: annotate power I2C being on-module
> 
>  arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 130 ++---
>  arch/arm/boot/dts/tegra30-colibri.dtsi        | 780 +++++++++++++++++++++-----
>  2 files changed, 706 insertions(+), 204 deletions(-)

Applied, thanks.

Thierry

Attachment: signature.asc
Description: PGP signature