Re: [PATCH v2 00/37] ARM: dts: tegra: colibri_t20: major revamp incl. eval board support

[Thierry Reding]

On Sun, Sep 02, 2018 at 12:08:29PM +0200, Marcel Ziswiler wrote:
> This series is a major overhaul and adds support for the Colibri
> Evaluation Board device tree.
> 
> Changes in v2:
> - Fix commit message which was mixed up between "[PATCH 03/31] ARM:
>   tegra: colibri_t20: iris: annotate i2c busses" and "[PATCH 04/31] ARM:
>   tegra: colibri_t20: iris: add missing aliases".
> - Also replace underscores in node names with dashes.
> - Also reflect this change in the Iris device tree.
> - Also reflect this change in the device tree bindings documentation.
> - New patch as suggested by Rob.
> - New patch.
> - Get rid of fake clocks simple bus as suggested by Rob.
> - Updated evaluation board device tree with all applicable previous
>   fixes.
> - Also reflect this addition in the device tree bindings documentation.
> 
> Marcel Ziswiler (37):
>   ARM: tegra: colibri_t20: move aliases from module to carrier board
>   ARM: tegra: colibri_t20: iris: integrate i2c real time clock support
>   ARM: tegra: colibri_t20: iris: add missing aliases
>   ARM: tegra: colibri_t20: iris: annotate i2c busses
>   ARM: tegra: colibri_t20: add local-mac-address property
>   ARM: tegra: colibri_t20: reorder host1x/hdmi properties
>   ARM: tegra: colibri_t20: iris: use no-1-8-v
>   ARM: tegra: colibri_t20: regulator clean-up
>   ARM: tegra: colibri_t20: add missing regulators
>   ARM: tegra: colibri_t20: annotate usb ehci instances
>   ARM: tegra: colibri_t20: remove phy-reset-gpio from controller node
>   ARM: tegra: colibri_t20: indentation/line-feed/white-space clean-up
>   ARM: tegra: colibri_t20: update sound nvidia,model
>   ARM: tegra: colibri_t20: pinmux clean-up
>   ARM: tegra: colibri_t20: add missing pinmux
>   ARM: tegra: colibri_t20: iris: display controller rgb panel support
>   ARM: tegra: colibri_t20: iris: annotate uarts
>   ARM: tegra: colibri_t20: iris: add uart-c
>   ARM: tegra: colibri_t20: use high speed uart driver
>   ARM: tegra: colibri_t20: iris: add gpio wakeup key
>   ARM: tegra: colibri_t20: iris: add dr_mode property
>   ARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor
>   ARM: tegra: colibri_t20: add i2c-thermtrip
>   ARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip
>   ARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers
>   ARM: tegra: colibri_t20: annotate/move sd card detect
>   ARM: tegra: colibri_t20: add compatibility comment
>   ARM: tegra: colibri_t20: simplify model and compatible properties
>   ARM: tegra: colibri_t20: iris: simplify model and compatible
>     properties
>   ARM: tegra: colibri_t20: iris: add colibri ssp support
>   ARM: tegra: colibri_t20: drop module level model and compatible
>   ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc
>   ARM: tegra: colibri_t20: iris: drop unused i2c_ddc label
>   ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label
>   ARM: tegra: colibri_t20: get rid of fake clocks simple bus
>   ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97
>   ARM: tegra: colibri_t20: add eval board device tree
> 
>  Documentation/devicetree/bindings/arm/tegra.txt |   5 +-
>  arch/arm/boot/dts/Makefile                      |   1 +
>  arch/arm/boot/dts/tegra20-colibri-eval-v3.dts   | 262 ++++++++++
>  arch/arm/boot/dts/tegra20-colibri-iris.dts      | 200 ++++++--
>  arch/arm/boot/dts/tegra20-colibri.dtsi          | 655 ++++++++++++++++--------
>  5 files changed, 866 insertions(+), 257 deletions(-)
>  create mode 100644 arch/arm/boot/dts/tegra20-colibri-eval-v3.dts

Applied, thanks. All of these series together have got to be some kind
of a record.

Thierry

Attachment: signature.asc
Description: PGP signature