[PATCH v3] IB/rxe: Remove unnecessary enum values

[Nathan Chancellor]

Clang warns when an emumerated type is implicitly converted to another.

drivers/infiniband/sw/rxe/rxe.c:106:27: warning: implicit conversion
from enumeration type 'enum rxe_device_param' to different enumeration
type 'enum ib_atomic_cap' [-Wenum-conversion]
        rxe->attr.atomic_cap                    = RXE_ATOMIC_CAP;
                                                ~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:131:22: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_port_state' [-Wenum-conversion]
        port->attr.state                = RXE_PORT_STATE;
                                        ~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:132:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
        port->attr.max_mtu              = RXE_PORT_MAX_MTU;
                                        ~ ^~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:133:27: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
        port->attr.active_mtu           = RXE_PORT_ACTIVE_MTU;
                                        ~ ^~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:151:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
                                ib_mtu_enum_to_int(RXE_PORT_ACTIVE_MTU);
                                ~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~
5 warnings generated.

Use the appropriate values from the expected enumerated type so no
conversion needs to happen then remove the unneeded definitions.

Reported-by: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
Signed-off-by: Nathan Chancellor <natechancellor@xxxxxxxxx>
---

v1 -> v2:

* Don't cast, just use the expecting enumerated value directly, per
  Jason's request

v2 -> v3:

* Convert two spots from RXE_PORT_MAX_MTU to IB_MTU_4096 then remove
  value definitions.

 drivers/infiniband/sw/rxe/rxe.c       | 13 ++++++-------
 drivers/infiniband/sw/rxe/rxe_loc.h   |  2 +-
 drivers/infiniband/sw/rxe/rxe_param.h |  4 ----
 3 files changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c
index 10999fa69281..383e65c7bbc0 100644
--- a/drivers/infiniband/sw/rxe/rxe.c
+++ b/drivers/infiniband/sw/rxe/rxe.c
@@ -103,7 +103,7 @@ static void rxe_init_device_param(struct rxe_dev *rxe)
 	rxe->attr.max_res_rd_atom		= RXE_MAX_RES_RD_ATOM;
 	rxe->attr.max_qp_init_rd_atom		= RXE_MAX_QP_INIT_RD_ATOM;
 	rxe->attr.max_ee_init_rd_atom		= RXE_MAX_EE_INIT_RD_ATOM;
-	rxe->attr.atomic_cap			= RXE_ATOMIC_CAP;
+	rxe->attr.atomic_cap			= IB_ATOMIC_HCA;
 	rxe->attr.max_ee			= RXE_MAX_EE;
 	rxe->attr.max_rdd			= RXE_MAX_RDD;
 	rxe->attr.max_mw			= RXE_MAX_MW;
@@ -128,9 +128,9 @@ static void rxe_init_device_param(struct rxe_dev *rxe)
 /* initialize port attributes */
 static int rxe_init_port_param(struct rxe_port *port)
 {
-	port->attr.state		= RXE_PORT_STATE;
-	port->attr.max_mtu		= RXE_PORT_MAX_MTU;
-	port->attr.active_mtu		= RXE_PORT_ACTIVE_MTU;
+	port->attr.state		= IB_PORT_DOWN;
+	port->attr.max_mtu		= IB_MTU_4096;
+	port->attr.active_mtu		= IB_MTU_256;
 	port->attr.gid_tbl_len		= RXE_PORT_GID_TBL_LEN;
 	port->attr.port_cap_flags	= RXE_PORT_PORT_CAP_FLAGS;
 	port->attr.max_msg_sz		= RXE_PORT_MAX_MSG_SZ;
@@ -147,8 +147,7 @@ static int rxe_init_port_param(struct rxe_port *port)
 	port->attr.active_width		= RXE_PORT_ACTIVE_WIDTH;
 	port->attr.active_speed		= RXE_PORT_ACTIVE_SPEED;
 	port->attr.phys_state		= RXE_PORT_PHYS_STATE;
-	port->mtu_cap			=
-				ib_mtu_enum_to_int(RXE_PORT_ACTIVE_MTU);
+	port->mtu_cap			= ib_mtu_enum_to_int(IB_MTU_256);
 	port->subnet_prefix		= cpu_to_be64(RXE_PORT_SUBNET_PREFIX);
 
 	return 0;
@@ -300,7 +299,7 @@ void rxe_set_mtu(struct rxe_dev *rxe, unsigned int ndev_mtu)
 	mtu = eth_mtu_int_to_enum(ndev_mtu);
 
 	/* Make sure that new MTU in range */
-	mtu = mtu ? min_t(enum ib_mtu, mtu, RXE_PORT_MAX_MTU) : IB_MTU_256;
+	mtu = mtu ? min_t(enum ib_mtu, mtu, IB_MTU_4096) : IB_MTU_256;
 
 	port->attr.active_mtu = mtu;
 	port->mtu_cap = ib_mtu_enum_to_int(mtu);
diff --git a/drivers/infiniband/sw/rxe/rxe_loc.h b/drivers/infiniband/sw/rxe/rxe_loc.h
index 8e305422adbb..afd53f57a62b 100644
--- a/drivers/infiniband/sw/rxe/rxe_loc.h
+++ b/drivers/infiniband/sw/rxe/rxe_loc.h
@@ -195,7 +195,7 @@ static inline int qp_mtu(struct rxe_qp *qp)
 	if (qp->ibqp.qp_type == IB_QPT_RC || qp->ibqp.qp_type == IB_QPT_UC)
 		return qp->attr.path_mtu;
 	else
-		return RXE_PORT_MAX_MTU;
+		return IB_MTU_4096;
 }
 
 static inline int rcv_wqe_size(int max_sge)
diff --git a/drivers/infiniband/sw/rxe/rxe_param.h b/drivers/infiniband/sw/rxe/rxe_param.h
index 4555510d86c4..bdea899a58ac 100644
--- a/drivers/infiniband/sw/rxe/rxe_param.h
+++ b/drivers/infiniband/sw/rxe/rxe_param.h
@@ -90,7 +90,6 @@ enum rxe_device_param {
 	RXE_MAX_RES_RD_ATOM		= 0x3f000,
 	RXE_MAX_QP_INIT_RD_ATOM		= 128,
 	RXE_MAX_EE_INIT_RD_ATOM		= 0,
-	RXE_ATOMIC_CAP			= 1,
 	RXE_MAX_EE			= 0,
 	RXE_MAX_RDD			= 0,
 	RXE_MAX_MW			= 0,
@@ -139,9 +138,6 @@ enum rxe_device_param {
 
 /* default/initial rxe port parameters */
 enum rxe_port_param {
-	RXE_PORT_STATE			= IB_PORT_DOWN,
-	RXE_PORT_MAX_MTU		= IB_MTU_4096,
-	RXE_PORT_ACTIVE_MTU		= IB_MTU_256,
 	RXE_PORT_GID_TBL_LEN		= 1024,
 	RXE_PORT_PORT_CAP_FLAGS		= RDMA_CORE_CAP_PROT_ROCE_UDP_ENCAP,
 	RXE_PORT_MAX_MSG_SZ		= 0x800000,
-- 
2.19.0