[PATCH] spi: spi-mem: Fix inverted logic in op sanity check

[Geert Uytterhoeven]

On r8a7791/koelsch:

    m25p80 spi0.0: error -22 reading 9f
    m25p80: probe of spi0.0 failed with error -22

Apparently the logic in spi_mem_check_op() is wrong, rejecting the
spi-mem operation if any buswidth is valid, instead of invalid.

Fixes: 380583227c0c7f52 ("spi: spi-mem: Add extra sanity checks on the op param")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/spi/spi-mem.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index cc3d425aae56..62a7b80801d2 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -169,10 +169,10 @@ static int spi_mem_check_op(const struct spi_mem_op *op)
 	    (op->data.nbytes && !op->data.buswidth))
 		return -EINVAL;
 
-	if (spi_mem_buswidth_is_valid(op->cmd.buswidth) ||
-	    spi_mem_buswidth_is_valid(op->addr.buswidth) ||
-	    spi_mem_buswidth_is_valid(op->dummy.buswidth) ||
-	    spi_mem_buswidth_is_valid(op->data.buswidth))
+	if (!spi_mem_buswidth_is_valid(op->cmd.buswidth) ||
+	    !spi_mem_buswidth_is_valid(op->addr.buswidth) ||
+	    !spi_mem_buswidth_is_valid(op->dummy.buswidth) ||
+	    !spi_mem_buswidth_is_valid(op->data.buswidth))
 		return -EINVAL;
 
 	return 0;
-- 
2.19.0