[PATCH AUTOSEL 4.18 28/65] HID: i2c-hid: Don't reset device upon system resume
From: Sasha Levin
Date: Sun Sep 30 2018 - 20:38:30 EST
From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
[ Upstream commit 52cf93e63ee672a92f349edc6ddad86ec8808fd8 ]
Raydium touchscreen triggers interrupt storm after system-wide suspend:
[ 179.085033] i2c_hid i2c-CUST0000:00: i2c_hid_get_input: incomplete report (58/65535)
According to Raydium, Windows driver does not reset the device after system
resume.
The HID over I2C spec does specify a reset should be used at intialization, but
it doesn't specify if reset is required for system suspend.
Tested this patch on other i2c-hid touchpanels I have and those touchpanels do
work after S3 without doing reset. If any regression happens to other
touchpanel vendors, we can use quirk for Raydium devices.
There's still one device uses I2C_HID_QUIRK_RESEND_REPORT_DESCR so keep it
there.
Cc: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>
Cc: AceLan Kao <acelan.kao@xxxxxxxxxxxxx>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
Signed-off-by: Jiri Kosina <jkosina@xxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
drivers/hid/hid-ids.h | 4 ----
drivers/hid/i2c-hid/i2c-hid.c | 13 +++++++------
2 files changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 6046150373ab..eee6b79fb131 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -528,10 +528,6 @@
#define I2C_VENDOR_ID_HANTICK 0x0911
#define I2C_PRODUCT_ID_HANTICK_5288 0x5288
-#define I2C_VENDOR_ID_RAYD 0x2386
-#define I2C_PRODUCT_ID_RAYD_3118 0x3118
-#define I2C_PRODUCT_ID_RAYD_4B33 0x4B33
-
#define USB_VENDOR_ID_HANWANG 0x0b57
#define USB_DEVICE_ID_HANWANG_TABLET_FIRST 0x5000
#define USB_DEVICE_ID_HANWANG_TABLET_LAST 0x8fff
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 5fd1159fc095..2c15ad217b5c 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -170,12 +170,8 @@ static const struct i2c_hid_quirks {
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
- { I2C_VENDOR_ID_RAYD, I2C_PRODUCT_ID_RAYD_3118,
- I2C_HID_QUIRK_RESEND_REPORT_DESCR },
{ USB_VENDOR_ID_SIS_TOUCH, USB_DEVICE_ID_SIS10FB_TOUCH,
I2C_HID_QUIRK_RESEND_REPORT_DESCR },
- { I2C_VENDOR_ID_RAYD, I2C_PRODUCT_ID_RAYD_4B33,
- I2C_HID_QUIRK_RESEND_REPORT_DESCR },
{ 0, 0 }
};
@@ -1240,11 +1236,16 @@ static int i2c_hid_resume(struct device *dev)
pm_runtime_enable(dev);
enable_irq(client->irq);
- ret = i2c_hid_hwreset(client);
+
+ /* Instead of resetting device, simply powers the device on. This
+ * solves "incomplete reports" on Raydium devices 2386:3118 and
+ * 2386:4B33
+ */
+ ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
if (ret)
return ret;
- /* RAYDIUM device (2386:3118) need to re-send report descr cmd
+ /* Some devices need to re-send report descr cmd
* after resume, after this it will be back normal.
* otherwise it issues too many incomplete reports.
*/
--
2.17.1