[PATCH] declance: Fix continuation with the adapter identification message

[Maciej W. Rozycki]

Fix a commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing
continuation lines") regression with the `declance' driver, which caused
the adapter identification message to be split between two lines, e.g.:

declance.c: v0.011 by Linux MIPS DECstation task force
tc6: PMAD-AA
, addr = 08:00:2b:1b:2a:6a, irq = 14
tc6: registered as eth0.

Address that properly, by printing identification with a single call,
making the messages now look like:

declance.c: v0.011 by Linux MIPS DECstation task force
tc6: PMAD-AA, addr = 08:00:2b:1b:2a:6a, irq = 14
tc6: registered as eth0.

Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxxxxx>
Fixes: 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines")
---
Hi,

 Not requesting a backport as the impact of this issue is purely cosmetic.  
Deferring driver review to use `netdev_info', etc. in place of `printk' to 
another time.  Please apply.

  Maciej
---
 drivers/net/ethernet/amd/declance.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

linux-net-declance-pr-cont.patch
Index: linux-20180930-4maxp64/drivers/net/ethernet/amd/declance.c
===================================================================
--- linux-20180930-4maxp64.orig/drivers/net/ethernet/amd/declance.c
+++ linux-20180930-4maxp64/drivers/net/ethernet/amd/declance.c
@@ -1031,6 +1031,7 @@ static int dec_lance_probe(struct device
 	int i, ret;
 	unsigned long esar_base;
 	unsigned char *esar;
+	const char *desc;
 
 	if (dec_lance_debug && version_printed++ == 0)
 		printk(version);
@@ -1216,19 +1217,20 @@ static int dec_lance_probe(struct device
 	 */
 	switch (type) {
 	case ASIC_LANCE:
-		printk("%s: IOASIC onboard LANCE", name);
+		desc = "IOASIC onboard LANCE";
 		break;
 	case PMAD_LANCE:
-		printk("%s: PMAD-AA", name);
+		desc = "PMAD-AA";
 		break;
 	case PMAX_LANCE:
-		printk("%s: PMAX onboard LANCE", name);
+		desc = "PMAX onboard LANCE";
 		break;
 	}
 	for (i = 0; i < 6; i++)
 		dev->dev_addr[i] = esar[i * 4];
 
-	printk(", addr = %pM, irq = %d\n", dev->dev_addr, dev->irq);
+	printk("%s: %s, addr = %pM, irq = %d\n",
+	       name, desc, dev->dev_addr, dev->irq);
 
 	dev->netdev_ops = &lance_netdev_ops;
 	dev->watchdog_timeo = 5*HZ;