Re: Traceback in ww_mutex test (test_cycle_work) on arm64/x86_64

[Guenter Roeck]

Hi Will,

On Mon, Sep 24, 2018 at 11:51:33AM +0100, Will Deacon wrote:
> Hi Guenter,
> 
> On Sun, Sep 23, 2018 at 12:57:06PM -0700, Guenter Roeck wrote:
> > when enabling CONFIG_WW_MUTEX_SELFTEST on arm64 or x86_64,
> > I get the following traceback.
> > 
> > [    3.111852] ------------[ cut here ]------------
> > [    3.112100] DEBUG_LOCKS_WARN_ON(__owner_task(owner) != current)
> > [    3.112753] WARNING: CPU: 1 PID: 771 at kernel/locking/mutex.c:1211 __mutex_unlock_slowpath+0x1a8/0x2e0
> > [    3.113238] Modules linked in:
> > [    3.113774] CPU: 1 PID: 771 Comm: kworker/u16:8 Not tainted 4.19.0-rc5-dirty #1
> > [    3.114025] Hardware name: linux,dummy-virt (DT)
> > [    3.114587] Workqueue: test-ww_mutex test_cycle_work
> > [    3.114950] pstate: 40000005 (nZcv daif -PAN -UAO)
> > [    3.115144] pc : __mutex_unlock_slowpath+0x1a8/0x2e0
> > [    3.115327] lr : __mutex_unlock_slowpath+0x1a8/0x2e0
> > [    3.115500] sp : ffff00000b7cbc40
> > [    3.115647] x29: ffff00000b7cbc40 x28: 0000000000000000 
> > [    3.115921] x27: ffff00000942f000 x26: ffff00000a204da0 
> > [    3.116155] x25: ffff00000a1c93d0 x24: ffff000009103cd8 
> > [    3.116376] x23: ffff00000a1c9000 x22: ffff00000942f000 
> > [    3.116596] x21: ffff00000b7cbca8 x20: ffff80001c05f8c8 
> > [    3.116817] x19: 0000000000000000 x18: ffffffffffffffff 
> > [    3.117036] x17: 0000000000000000 x16: 0000000000000000 
> > [    3.117256] x15: ffff00000942f808 x14: ffff00008a1c8bb7 
> > [    3.117476] x13: ffff00000a1c8bc5 x12: ffff00000944f000 
> > [    3.117695] x11: 0000000005f5e0ff x10: ffff0000094b3000 
> > [    3.117947] x9 : 0000000000000000 x8 : ffff00000942f808 
> > [    3.118172] x7 : ffff00000816153c x6 : 0000000000000000 
> > [    3.118392] x5 : 0000000000000000 x4 : ffff00000b7cc000 
> > [    3.118612] x3 : 6172e063a21fe200 x2 : ffff00000944fd80 
> > [    3.118830] x1 : 6172e063a21fe200 x0 : 0000000000000000 
> > [    3.119169] Call trace:
> > [    3.119348]  __mutex_unlock_slowpath+0x1a8/0x2e0
> > [    3.119540]  ww_mutex_unlock+0x48/0xa0
> > [    3.119709]  test_cycle_work+0x10c/0x220
> > [    3.119864]  process_one_work+0x29c/0x708
> > [    3.120016]  worker_thread+0x40/0x458
> > [    3.120179]  kthread+0x12c/0x130
> > [    3.120317]  ret_from_fork+0x10/0x18
> 
> Fun: I can reproduce this all the way back to 4.11, when the selftests
> were merged!
> 
Yes, I know. Sorry, I should have mentioned it.

> > Debugging shows that the traceback occurs in the following code
> > in test_cycle_work().
> > 
> > +       err = ww_mutex_lock(cycle->b_mutex, &ctx);
> > +       if (err == -EDEADLK) {
> > 				# true
> > +               ww_mutex_unlock(&cycle->a_mutex);
> > +               ww_mutex_lock_slow(cycle->b_mutex, &ctx);
> > +               err = ww_mutex_lock(&cycle->a_mutex, &ctx);
> > 				# returns with err == -EDEADLK
> > +       }
> > +
> > +       if (!err)
> > +               ww_mutex_unlock(cycle->b_mutex);
> > +       ww_mutex_unlock(&cycle->a_mutex);
> > 				# traceback seen here:
> > 				# unlocks a_mutex even though it was not
> > 				# acquired by this thread
> > 
> > Details don't really matter as long as the number of CPUs is at least 8
> > (I have not seen the problem with 1, 2, 4, or 6 CPUs). My test system
> > has 8 CPU cores (times 2 for hyperthreading), so that may be related.
> > 
> > The test case above is clearly wrong if both calls to ww_mutex_lock()
> > fail with -EDEADLK. Unfortunately I don't know the expected behavior
> > in this case, so I'll have to pass this on without a proposed fix.
> 
> Yeah, I think the test code isn't robust in the face of
> CONFIG_DEBUG_WW_MUTEX_SLOWPATH, which can spuriously return -EDEADLK
> from mutex_lock(). It looks like it's assuming that err will always be
> reset to 0 when it takes a_mutex the second time. Chris?
> 

I just sent a patch to fix the kernel warning message. That doesn't fix
the test failure, but then I have no idea if this is a real test failure
or a bad test program.

Thanks,
Guenter