Re: [PATCH v5 2/2] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC

[Doug Anderson]

Hi,
On Wed, Oct 3, 2018 at 5:14 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
>
> Add a channel node for the die temperature to the ADC.
>
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
> Changes in v4:
> - added unit address to 'die-temp' node

This probably should have been "changes in v5"

> ---
>  arch/arm64/boot/dts/qcom/pm8998.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> index 048f19fa0150..32b141637d13 100644
> --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
> @@ -75,6 +75,11 @@
>                         #address-cells = <1>;
>                         #size-cells = <0>;
>                         #io-channel-cells = <1>;
> +
> +                       die-temp@ADC5_DIE_TEMP {
> +                               reg = <ADC5_DIE_TEMP>;

Thanks for adding the unit address.  Note to Andy that this ought to
go into the queue for 4.20 since you'll have the ADC5_DIE_TEMP then.


-Doug