Re: [PATCH V10 5/8] clocksource: add C-SKY SMP timer

[Guo Ren]

Hi Daniel,

On Fri, Oct 05, 2018 at 03:48:58PM +0200, Daniel Lezcano wrote:
> On 04/10/2018 19:22, Guo Ren wrote:
> > This timer is used by SMP system and use mfcr/mtcr instruction
> > to access the regs.
> > 
> > Changelog:
> >  - Add rollback for timer_of_cleanup.
> >  - Use request_percpu_irq separate from time_of.
> >  - Remove #define CPUHP_AP_CSKY_TIMER_STARTING.
> >  - Add CPUHP_AP_CSKY_TIMER_STARTING in cpuhotplug.h.
> >  - Support csky mp timer alpha version.
> >  - Just use low-counter with 32bit width as clocksource.
> >  - Coding convention with upstream feed-back.
> > 
> > Signed-off-by: Guo Ren <ren_guo@xxxxxxxxx>
> > ---
> >  drivers/clocksource/Kconfig         |  10 +++
> >  drivers/clocksource/Makefile        |   1 +
> >  drivers/clocksource/timer-mp-csky.c | 173 ++++++++++++++++++++++++++++++++++++
> >  include/linux/cpuhotplug.h          |   1 +
> >  4 files changed, 185 insertions(+)
> >  create mode 100644 drivers/clocksource/timer-mp-csky.c
> > 
> > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> > index a11f4ba..826a2e8 100644
> > --- a/drivers/clocksource/Kconfig
> > +++ b/drivers/clocksource/Kconfig
> > @@ -620,4 +620,14 @@ config RISCV_TIMER
> >  	  is accessed via both the SBI and the rdcycle instruction.  This is
> >  	  required for all RISC-V systems.
> >  
> > +config CSKY_MP_TIMER
> > +	bool "SMP Timer for the C-SKY platform"
> > +	depends on CSKY
> > +	select TIMER_OF
> > +	help
> > +	  Say yes here to enable C-SKY SMP timer driver used for C-SKY SMP
> > +	  system.
> > +	  csky,mptimer is not only used in SMP system, it also could be used
> > +	  single core system. It's not a mmio reg and it use mtcr/mfcr instruction.
> 
> 
> ... COMPILE_TEST :)
Ops... I forgot it, should be: 
	bool "SMP Timer for the C-SKY platform" if COMPILE_TEST

Thx for remind and any other review is welcome.

Best Regards
 Guo Ren