[PATCH v2 2/4] dt-bindings: imx6q-pcie: Add multi-pd bindings for imx6sx

[Leonard Crestez]

The PCIE and PCIE_PHY blocks are in different power domains on imx6sx
and this needs to be described using multi-pd bindings.

This was not required until now because the power-domain of the PCIE
block (DISPLAY) was always on.

Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
---
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index f37494d5a7be..d514c1f2365f 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -39,11 +39,13 @@ Optional properties:
   host.
 
 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries:
 	- "pcie_inbound_axi"
-- power-domains: Must be set to a phandle pointing to the PCIE_PHY power domain
+- power-domains: Must be set to phandles pointing to the DISPLAY and
+  PCIE_PHY power domains
+- power-domain-names: Must be "pcie", "pcie_phy"
 
 Additional required properties for imx7d-pcie:
 - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
 - resets: Must contain phandles to PCIe-related reset lines exposed by SRC
   IP block
-- 
2.17.1