Re: [PATCH 6/6] arm64: dts: xilinx: ultra96: Standardize LED labels and triggers

[Michal Simek]

On 9.10.2018 16:05, Manivannan Sadhasivam wrote:
> For all 96Boards, the following standard is used for onboard LEDs.
> 
> device-name:green:user1  default-trigger: heartbeat
> device-name:green:user2  default-trigger: mmc0/disk-activity
>                                           (onboard-storage)
> device-name:green:user3  default-trigger: mmc1 (SD-card)
> device-name:green:user4  default-trigger: none, panic-indicator
> device-name:yellow:wlan  default-trigger: phy0tx
> device-name:blue:bt      default-trigger: hci0-power
> 
> So lets adopt the same for Ultra96, which is one of the 96Boards
> CE and AI platform. Since the WLAN and BT LEDs are hardwired onboard,
> consolidate only User LEDs.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 15 ++++++++-------
>  1 file changed, 8 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> index eb5e8bddb610..565ceb390f99 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
> @@ -57,29 +57,30 @@
>  	leds {
>  		compatible = "gpio-leds";
>  		ds2 {
> -			label = "ds2";
> +			label = "zynqmp-zcu100-revC:green:user1";

The purpose of this series should be standardize Led labels that's why I
would expect that leds will be called in the same way on all these
boards that's why I am not getting why there is board name.

green:user1 or just user1 should be enough.

Thanks,
Michal