[PATCH v2 7/8] Input: olpc_apsp: enable the SP clock

From: Lubomir Rintel
Date: Wed Oct 10 2018 - 10:25:41 EST


Without the clock, the keyboard controller won't operate.
Tested on an OLPC XO 1.75.

Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
---
drivers/input/serio/olpc_apsp.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/input/serio/olpc_apsp.c b/drivers/input/serio/olpc_apsp.c
index 8b19a47dfa46..fe9e19014e70 100644
--- a/drivers/input/serio/olpc_apsp.c
+++ b/drivers/input/serio/olpc_apsp.c
@@ -23,6 +23,7 @@
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/clk.h>

/*
* The OLPC XO-1.75 and XO-4 laptops do not have a hardware PS/2 controller.
@@ -74,6 +75,7 @@ struct olpc_apsp {
struct serio *kbio;
struct serio *padio;
void __iomem *base;
+ struct clk *clk;
int open_count;
int irq;
};
@@ -146,8 +148,13 @@ static int olpc_apsp_open(struct serio *port)
struct olpc_apsp *priv = port->port_data;
unsigned int tmp;
unsigned long l;
+ int error;

if (priv->open_count++ == 0) {
+ error = clk_prepare_enable(priv->clk);
+ if (error)
+ return error;
+
l = readl(priv->base + COMMAND_FIFO_STATUS);
if (!(l & CMD_STS_MASK)) {
dev_err(priv->dev, "SP cannot accept commands.\n");
@@ -171,6 +178,8 @@ static void olpc_apsp_close(struct serio *port)
/* Disable interrupt 0 */
tmp = readl(priv->base + PJ_INTERRUPT_MASK);
writel(tmp | INT_0, priv->base + PJ_INTERRUPT_MASK);
+
+ clk_disable_unprepare(priv->clk);
}
}

@@ -198,6 +207,10 @@ static int olpc_apsp_probe(struct platform_device *pdev)
if (priv->irq < 0)
return priv->irq;

+ priv->clk = devm_clk_get(&pdev->dev, "sp");
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
/* KEYBOARD */
kb_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
if (!kb_serio)
--
2.19.0