RE: [PATCH v3 0/4] drivers: soc: xilinx: Add support for ZynqMP power domain driver

[Jolly Shah]

Ping for comments

Thanks,
Jolly Shah

> -----Original Message-----
> From: Jolly Shah [mailto:jolly.shah@xxxxxxxxxx]
> Sent: Thursday, October 04, 2018 2:24 PM
> To: matthias.bgg@xxxxxxxxx; andy.gross@xxxxxxxxxx; shawnguo@xxxxxxxxxx;
> geert+renesas@xxxxxxxxx; bjorn.andersson@xxxxxxxxxx;
> sean.wang@xxxxxxxxxxxx; m.szyprowski@xxxxxxxxxxx; Michal Simek
> <michals@xxxxxxxxxx>; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx
> Cc: Rajan Vaja <RAJANV@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Jolly Shah
> <JOLLYS@xxxxxxxxxx>
> Subject: [PATCH v3 0/4] drivers: soc: xilinx: Add support for ZynqMP power
> domain driver
> 
> The zynqmp power domain driver communicates the usage requirements for
> logical power domains / devices to the platform FW.
> FW is responsible for choosing appropriate power states, taking Linux' usage
> information into account.
> 
> This patch series is based on top of Xilinx firmware patch set:
> https://patchwork.kernel.org/cover/10555405/
> 
> v3:
>  - Changed binding to have FW node as a power controller as suggested by Rob
>  - Updated FW driver to register it as mfd child devices from firmware probe
>  - Move bindings location as suggested
> 
> v2:
>  - Rebased on top of latest firmware driver patch series
>  - Updated driver name from zynqmp-genpd to zynqmp-power-controller
>  - Updated device tree bindings to move power controller node under firmware
> node
> 
> Jolly Shah (1):
>   drivers: soc: xilinx: Add ZynqMP power domain driver
> 
> Rajan Vaja (3):
>   dt-bindings: power: Add ZynqMP power domain bindings
>   firmware: xilinx: Add APIs to control node status/power
>   firmware: xilinx: Add node IDs for zynqmp firmware
> 
>  .../bindings/power/xlnx,zynqmp-genpd.txt           |  34 ++
>  drivers/firmware/xilinx/Kconfig                    |   1 +
>  drivers/firmware/xilinx/zynqmp.c                   |  73 ++++
>  drivers/soc/xilinx/Kconfig                         |   9 +
>  drivers/soc/xilinx/Makefile                        |   2 +
>  drivers/soc/xilinx/zynqmp_pm_domains.c             | 403
> +++++++++++++++++++++
>  include/dt-bindings/power/xlnx-zynqmp-power.h      |  39 ++
>  include/linux/firmware/xlnx-zynqmp.h               |  98 +++++
>  8 files changed, 659 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/xlnx,zynqmp-
> genpd.txt
>  create mode 100644 drivers/soc/xilinx/zynqmp_pm_domains.c
>  create mode 100644 include/dt-bindings/power/xlnx-zynqmp-power.h
> 
> --
> 2.7.4