Re: [PATCH] mtd: spi-nor: Add support for SPI boot flash access for AMD Family 16h

[kbuild test robot]

Hi Brett,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on mtd/spi-nor/next]
[also build test WARNING on v4.19-rc7 next-20181011]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Brett-Grandbois/mtd-spi-nor-Add-support-for-SPI-boot-flash-access-for-AMD-Family-16h/20181012-085348
base:   git://git.infradead.org/linux-mtd.git spi-nor/next
config: x86_64-allmodconfig (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All warnings (new ones prefixed by >>):

>> drivers/mtd/spi-nor/amd-spirom.c:355:22: warning: incorrect type in assignment (different base types)
   drivers/mtd/spi-nor/amd-spirom.c:355:22:    expected unsigned int [unsigned] [usertype] addr
   drivers/mtd/spi-nor/amd-spirom.c:355:22:    got restricted __be32 [usertype] <noident>
   drivers/mtd/spi-nor/amd-spirom.c:396:14: warning: incorrect type in assignment (different base types)
   drivers/mtd/spi-nor/amd-spirom.c:396:14:    expected unsigned int [unsigned] [usertype] addr
   drivers/mtd/spi-nor/amd-spirom.c:396:14:    got restricted __be32 [usertype] <noident>

vim +355 drivers/mtd/spi-nor/amd-spirom.c

   296	
   297	/*
   298	 * fallback read op based on explicit read command
   299	 * ideally the HW io will be used but this needs to be available if it's not
   300	 * strapped, can't get the resources, etc.
   301	 * spi_nor_read() will loop on the actual bytes read so we can just limit
   302	 * ourselves to the 64-byte FIFO size.
   303	 */
   304	static ssize_t amd_spirom_read(struct spi_nor *nor, loff_t from,
   305				       size_t len, u_char *read_buf)
   306	{
   307		struct amd_spirom *spirom = nor->priv;
   308		u32 *pbuf32;
   309		size_t head;
   310		size_t tail;
   311		size_t left;
   312		ssize_t rc;
   313		size_t cur;
   314		u8 *p_addr;
   315		u8 rd_len;
   316		size_t i;
   317		u32 addr;
   318	
   319		dev_dbg(nor->dev, "read: from: %lld  len: %zu\n", from, len);
   320	
   321		/*
   322		 * We only allow READ in the HWCAPS so most read operations should come
   323		 * with that opcode.  However, the SPI-NOR layer can swap out the read
   324		 * opcode with something else (i.e. Read SFDP) which must be handled via
   325		 * alt command and not the ROM IO
   326		 */
   327		if (spirom->rom && (nor->read_opcode == SPINOR_OP_READ)) {
   328			/*
   329			 * no need for status/busy as the HW controller will deal with
   330			 * that, but memcpy_fromio can make out-of-order fetches so need
   331			 * to do this explicitly
   332			 */
   333			left = len;
   334			head = from & 3;
   335			left -= head;
   336			tail = left & 3;
   337			left -= tail;
   338			cur = 0;
   339	
   340			for (i = 0; i < head; i++, cur++)
   341				read_buf[cur] = ioread8(spirom->rom + from + cur);
   342	
   343			pbuf32 = (u32 *)(read_buf + cur);
   344			left /= 4;
   345	
   346			for (i = 0; i < left; i++, cur += 4, pbuf32++)
   347				*pbuf32 = ioread32(spirom->rom + from + cur);
   348	
   349			for (i = 0; i < tail; i++, cur++)
   350				read_buf[cur] = ioread8(spirom->rom + from + cur);
   351	
   352			rc = (ssize_t)len;
   353		} else {
   354	
 > 355			addr = cpu_to_be32((u32)(from));
   356			p_addr = (u8 *)(&addr);
   357	
   358			rd_len = len > 64 ? 64 : (u8)len;
   359	
   360			if (nor->addr_width == 3)
   361				p_addr++;
   362	
   363			rc = amd_spirom_reg_xfer(spirom, nor->read_opcode, rd_len,
   364						 nor->addr_width, read_buf, p_addr);
   365	
   366			if (!rc)
   367				rc = (ssize_t)rd_len;
   368		}
   369	
   370		return rc;
   371	}
   372	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

Attachment: .config.gz
Description: application/gzip