Re: [PATCH 5/7] mfd: ds90ux9xx: add I2C bridge/alias and link connection driver

[Lee Jones]

On Fri, 12 Oct 2018, Vladimir Zapolskiy wrote:
> On 10/12/2018 09:04 AM, Lee Jones wrote:
> > On Tue, 09 Oct 2018, Vladimir Zapolskiy wrote:
> > 
> >> From: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
> >>
> >> The change adds TI DS90Ux9xx I2C bridge/alias subdevice driver and
> >> FPD Link connection handling mechanism.
> >>
> >> Access to I2C devices connected to a remote de-/serializer is done in
> >> a transparent way, on established link detection event such devices
> >> are registered on an I2C bus, which serves a local de-/serializer IC.
> >>
> >> The development of the driver was a collaborative work, the
> >> contribution done by Balasubramani Vivekanandan includes:
> >> * original simplistic implementation of the driver,
> >> * support of implicitly specified devices in device tree,
> >> * support of multiple FPD links for TI DS90Ux9xx,
> >> * other kind of valuable review comments, clean-ups and fixes.
> >>
> >> Also Steve Longerbeam made the following changes:
> >> * clear address maps after linked device removal,
> >> * disable pass-through in disconnection,
> >> * qualify locked status with non-zero remote address.
> >>
> >> Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@xxxxxxxxxx>
> >> ---
> >>  drivers/mfd/Kconfig                |   8 +
> >>  drivers/mfd/Makefile               |   1 +
> >>  drivers/mfd/ds90ux9xx-i2c-bridge.c | 764 +++++++++++++++++++++++++++++
> >>  3 files changed, 773 insertions(+)
> >>  create mode 100644 drivers/mfd/ds90ux9xx-i2c-bridge.c
> > 
> > Shouldn't this live in drivers/i2c?
> 
> no, the driver is not for an I2C controller of any kind, and the driver does
> not register itself in the I2C subsystem by calling i2c_add_adapter() or
> i2c_add_numbered_adapter() or i2c_mux_add_adapter() etc, this topic was
> discussed with Wolfram also.
> 
> Formally the driver converts the managed IC into a multi-address I2C
> slave device, I understand that it does not sound like a well suited driver
> for MFD, but ds90ux9xx-core.c and ds90ux9xx-i2c-bridge.c drivers are quite
> tightly coupled.

Using MFD as the default dumping ground for anything which does more
than one thing has also been discussed before. :)

You need to figure out what function this device provides and
re-locate it into the subsystem which it best fits.

-- 
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog