Re: [V2, 2/5] Documentation: dt-bindings: Document the Synopsys MIPI DPHY Rx bindings

[Rob Herring]

On Thu, Sep 20, 2018 at 01:16:40PM +0200, Luis Oliveira wrote:
> Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
> RX mode.

"dt-bindings: phy: ..." for the subject.

> 
> Signed-off-by: Luis Oliveira <lolivei@xxxxxxxxxxxx>
> ---
> Changelog
> v2:
> - no changes
> 
>  .../devicetree/bindings/phy/snps,dphy-rx.txt       | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
> 
> diff --git a/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
> new file mode 100644
> index 0000000..9079f4a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
> @@ -0,0 +1,36 @@
> +Synopsys DesignWare MIPI Rx D-PHY block details
> +
> +Description
> +-----------
> +
> +The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
> +Please refer to phy-bindings.txt for more information.
> +
> +Required properties:
> +- compatible		: Shall be "snps,dphy-rx".
> +- #phy-cells		: Must be 1.
> +- snps,dphy-frequency	: Output frequency of the D-PHY.
> +- snps,dphy-te-len	: Size of the communication interface (8 bits->8 or 12bits->12).
> +- reg			: Physical base address and size of the device memory mapped
> +		 	  registers;
> +
> +Optional properties:
> +- snps,compat-mode	: Compatibility mode control

type? values?

> +
> +The per-board settings:
> +- gpios 		: Synopsys testchip used as reference uses this to change setup
> +		  	  configurations.

Preferred to be named (e.g. foo-gpios). How many? What are their 
functions?

> +
> +Example:
> +
> +	mipi_dphy_rx1: dphy@3040 {
> +		compatible = "snps,dphy-rx";
> +		#phy-cells = <1>;
> +		snps,dphy-frequency = <300000>;
> +		snps,dphy-te-len = <12>;
> +		snps,compat-mode = <1>;
> +		reg = < 0x03040 0x20
> +			0x08000 0x100
> +			0x09000 0x100>;
> +	};
> +
> -- 
> 2.9.3
>